Instant Quote

Home > Integrated Circuits ICs > MK64FN1M0VLL12

MK64FN1M0VLL12

Kinetis K64 120MHz Cortex-M4F MCU, 1MB Flash, 256KB SRAM, Ethernet, USB OTG, 100-LQFP

12476

Effective Inventory
Go to Inquiry

Image for reference only

Manufacturer Part：

MK64FN1M0VLL12

Package：

100-LQFP (14 x 14 x 1.4mm)

Brand：
Product Categories：
Quality Commitment
Shipping & Payment
Service & Packaging
Product Manual
Other recommendations you may be interested in.

STM32F767ZIT6

NC7SZ32M5X

BQ76952PFBR

MCP4922-E/SL

FT230XS-R

BQ24192IRGER

TLV2211IDBVR

TLP185GB

Description

Product Overview

The MK64FN1M0VLL12 from NXP Semiconductors is a Kinetis K64 family 120MHz Arm Cortex-M4 microcontroller in a 100-LQFP package. It features 1MB Flash, 256KB SRAM, IEEE 1588 Ethernet, crystal-less USB 2.0 OTG, dual 16-bit ADCs, dual 12-bit DACs, and FlexMemory with up to 4KB EEPROM emulation, targeting industrial IoT and motor control applications.

Key Specifications

Core Arm Cortex-M4 with FPU and DSP
Max Frequency 120MHz
Flash Memory 1024KB (1MB)
SRAM 256KB
FlexMemory (EEPROM) 4KB EEPROM + 128KB FlexNVM
Ethernet IEEE 1588 MAC with hardware timestamp
USB 2.0 OTG Full-Speed (crystal-less)
ADC 2x 16-bit, 500ns conversion
DAC 2x 12-bit
Comparators 3x high-speed
UART Up to 6 (one with ISO7816)
SPI / I2C 3x DSPI / 3x I2C
CAN 1x
Timers 4x FlexTimer (20 channels), PIT, CMT
GPIO 66
DMA 16-channel with crossbar switch
Security MPU, CRC, RNG, AES (in select derivatives)
Supply Voltage 1.71V to 3.6V
Package 100-LQFP (14 x 14mm)
Operating Temperature -40°C to +105°C

Features

  • Arm Cortex-M4 core with single-precision FPU and DSP/SIMD instructions
  • 120MHz operation with single-cycle MAC
  • 1MB dual-bank Flash for concurrent code execution and firmware update
  • 256KB SRAM with multiple power gating regions
  • FlexMemory: 4KB EEPROM emulation (>10M cycles) + 128KB FlexNVM
  • IEEE 1588 Ethernet with hardware timestamping for industrial real-time control
  • Crystal-less USB 2.0 OTG with embedded 48MHz oscillator
  • Dual 16-bit ADCs with single/differential mode and programmable delay trigger
  • Dual 12-bit DACs for analog waveform generation
  • Ultra-low-power: <340nA stop, <250μA/MHz run, 4.5μs wake-up
  • MCUXpresso SDK, IDE, and Config Tools support

Applications

  • Industrial IoT gateways and edge nodes
  • Motor drive and motion control systems
  • Smart energy and smart grid devices
  • Medical instrumentation and patient monitoring
  • POS terminals and payment systems

The MK64FN1M0VLL12 from NXP Semiconductors is a high-performance Kinetis K64 family microcontroller based on the Arm Cortex-M4 core with floating-point unit and DSP instructions, running at 120MHz. It integrates 1MB dual-bank Flash, 256KB SRAM, and FlexMemory (4KB EEPROM + 128KB FlexNVM). Key connectivity includes IEEE 1588 Ethernet with hardware timestamping, crystal-less USB 2.0 OTG, 6 UARTs, 3 SPI, 3 I2C, and CAN. Analog peripherals include dual 16-bit ADCs, dual 12-bit DACs, and three high-speed comparators. The device features ultra-low-power modes with stop current below 340nA and 4.5μs wake-up time.

The MK64FN1M0VLL12 is built around an Arm Cortex-M4F core with a 4-stage pipeline executing Thumb-2 instructions at up to 120MHz. The crossbar switch enables concurrent multi-master bus accesses to Flash, SRAM, and peripherals via a 16-channel DMA controller. The dual-bank Flash architecture allows one bank to execute code while the other is being programmed, enabling firmware-over-the-air updates without halting execution. The FlexMemory controller provides up to 4KB of byte-writeable EEPROM emulation with over 10 million write cycles, plus 128KB of additional FlexNVM. The Ethernet MAC with IEEE 1588 precision time protocol hardware timestamping enables sub-microsecond clock synchronization for industrial real-time networks. The USB 2.0 OTG controller integrates a 48MHz oscillator, eliminating the need for an external crystal.

Pin Name Type Function
1-8 PTE0-PTE7 I/O Port E: SPI, UART, I2C, Ethernet
9-16 PTA0-PTA7 I/O Port A: Ethernet, UART0, JTAG
17-24 PTA8-PTA15 I/O Port A: Ethernet, UART0, I2S
25-32 PTB0-PTB7 I/O Port B: ADC, UART, CAN, FTMs
33-40 PTB8-PTB15 I/O Port B: ADC, SPI, I2C, FTMs
41-48 PTC0-PTC7 I/O Port C: USB, UART, SPI, FTMs
49-56 PTC8-PTC15 I/O Port C: UART, I2S, FTMs
57-64 PTD0-PTD7 I/O Port D: DAC, ADC, SPI, UART
65-72 PTD8-PTD15 I/O Port D: FTMs, I2C, SPI
73-80 VDD/VSS Power Multiple supply/ground pairs
81-88 VDDA/VSSA Power Analog supply and reference
89-96 USB/VREF Power/I/O USB supply, voltage reference
  • Industrial IoT gateways with Ethernet and IEEE 1588 PTP synchronization
  • Motor drive control using dual ADCs, DACs, and FlexTimer PWM
  • Medical patient monitoring devices with USB data transfer
  • Smart energy meters with Ethernet connectivity and real-time control
  • POS terminals requiring dual-bank Flash for secure firmware updates
Manufacturer Part Number Package Notes
NXP MK64FN1M0VMD12 MAPBGA-121 BGA package version, same specs
NXP MK64FX512VLL12 LQFP-100 512KB Flash variant
ST STM32F407VET6 LQFP-100 Cortex-M4, 168MHz, Ethernet
TI TM4C1294NCPDT TQFP-128 Cortex-M4F, 120MHz, Ethernet
Microchip SAME70Q21B-AN TQFP-144 Cortex-M7, 300MHz, Ethernet
Recommend Parts

MPX5010GP

Gauge pressure sensor, 0-10kPa, 0.2-4.7V output, high sensitivity 450mV/kPa, 5V supply, single port

Brand:

Package:

SENSOR4F (17.78 x 29.48 x 10.67 mm, single side port)
In stock:
2620pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

MPX5100GP

Gauge pressure sensor, 0-100kPa, 0.2-4.7V output, on-chip conditioned, 5V supply, single port

Brand:

Package:

SENSOR4F (17.78 x 29.48 x 10.67 mm, single side port)
In stock:
7645pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

MPX5700AP

Absolute pressure sensor, 15-700kPa, 0.2-4.7V output, vacuum referenced, 5V supply, single port

Brand:

Package:

SENSOR4F (17.78 x 29.48 x 10.67 mm, single side port)
In stock:
6161pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

MPX5700GP

Gauge pressure sensor, 15-700kPa, 0.2-4.7V output, on-chip conditioned, 5V supply, single port

Brand:

Package:

SENSOR4F (17.78 x 29.48 x 10.67 mm, single side port)
In stock:
7585pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

MPX5700DP

Differential pressure sensor, 0-700kPa, 0.2-4.7V output, on-chip conditioned, 5V supply, dual port

Brand:

Package:

SENSOR4F (17.78 x 29.48 x 10.67 mm, dual side ports)
In stock:
9760pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

MPX5100DP

Differential pressure sensor, 0-100kPa, 0.2-4.7V output, on-chip conditioned, 5V supply, dual port

Brand:

Package:

SENSOR4F (17.78 x 29.48 x 10.67 mm, dual side ports)
In stock:
8488pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
Quality Assurance

All electronic components we source from our partnered supply chains go through strict incoming inspections.Through careful testing, we ensure everything delivered to customers is genuine original parts and meets quality requirements.In addition, we keep complete inspection records to make the entire supply chain process clear and traceable.

Certification
We have obtained a number of professional certifications and built our own professional testing laboratory.This ensures that every product we deliver to our customers meets the highest quality requirements.We conduct tests in strict accordance with procedures to ensure stable product quality and accurate parameters.To guarantee genuine original parts, we also cooperate with reliable third-party testing institutions for strict quality inspection.We always attach great importance to quality and fully comply with industry standards, relevant regulations, and ISO 9001:2015 requirements.

Shipping & Payment

All electronic components we source from our partnered supply chains go through strict incoming inspections.Through careful testing, we ensure everything delivered to customers is genuine original parts and meets quality requirements.In addition, we keep complete inspection records to make the entire supply chain process clear and traceable.

Certification
We have obtained a number of professional certifications and built our own professional testing laboratory.This ensures that every product we deliver to our customers meets the highest quality requirements.We conduct tests in strict accordance with procedures to ensure stable product quality and accurate parameters.To guarantee genuine original parts, we also cooperate with reliable third-party testing institutions for strict quality inspection.We always attach great importance to quality and fully comply with industry standards, relevant regulations, and ISO 9001:2015 requirements.

Service & Packaging

All electronic components we source from our partnered supply chains go through strict incoming inspections.Through careful testing, we ensure everything delivered to customers is genuine original parts and meets quality requirements.In addition, we keep complete inspection records to make the entire supply chain process clear and traceable.

Certification
We have obtained a number of professional certifications and built our own professional testing laboratory.This ensures that every product we deliver to our customers meets the highest quality requirements.We conduct tests in strict accordance with procedures to ensure stable product quality and accurate parameters.To guarantee genuine original parts, we also cooperate with reliable third-party testing institutions for strict quality inspection.We always attach great importance to quality and fully comply with industry standards, relevant regulations, and ISO 9001:2015 requirements.

Company
insights
Industries
All Products
Integrated Circuits
C&I Devices
Discrete
Memory Chips
MPUs & MCUs