The M24M01-RMN6TP from ST is a 1Mbit I2C EEPROM with 400kHz bus speed, 4Mhz clock, and page-write mode in TSSOP-8 for data storage in industrial and consumer applications.
| 包装 | TSSOP-8 (4.4×3.0mm) |
The M24M01-RMN6TP from ST is a 1Mbit I2C EEPROM with 400kHz bus speed, 4Mhz clock, and page-write mode in TSSOP-8 for data storage in industrial and consumer applications.
The M24M01-RMN6TP is a 1Mbit (128KB) I2C EEPROM from STMicroelectronics in TSSOP-8, operating from 1.8V to 5.5V with 400kHz I2C clock rate. The memory is organized as 131,072 x 8 bits, addressed via a 17-bit address word sent as two bytes after the device address byte. The I2C device address is 1010+A16+E2+E1+E0, where A16 is the MSB of the memory address and E0-E2 are hardware-selectable chip enable pins. This allows up to 8 devices on the same I2C bus for a total of 8Mbit (1MB). The WC (Write Control) pin, when driven LOW, protects the entire memory array from write operations, useful for protecting calibration data or firmware settings. The page-write mode allows writing up to 256 bytes in a single operation: after the initial byte is written, subsequent bytes are latched internally and programmed simultaneously with a typical 5ms write cycle. Random read requires a dummy write sequence (send address, then restart as read). Sequential read allows continuous reading at up to 400kHz without re-addressing. The device supports 4 million write cycles per byte and retains data for 200 years at 55C. The -RMN6TP suffix specifies TSSOP-8, automotive grade, tape-and-reel.
| 针脚 | 名称 | 类型 | 功能 |
|---|---|---|---|
| 1 | E0 | 输入 | Chip enable bit 0 (address selection, tie to VCC or GND) |
| 2 | E1 | 输入 | Chip enable bit 1 (address selection, tie to VCC or GND) |
| 3 | E2 | 输入 | Chip enable bit 2 (address selection, tie to VCC or GND) |
| 4 | VSS | 电源 | 地面 |
| 5 | SDA | 输入/输出 | I2C serial data (open-drain, requires external pull-up) |
| 6 | SCL | 输入 | I2C serial clock (requires external pull-up) |
| 7 | WC | 输入 | Write control (active LOW protects entire memory, active HIGH allows writes) |
| 8 | VCC | 电源 | Supply (1.8-5.5V) |
| 制造商 | 部件编号 | 包装 | 说明 |
|---|---|---|---|
| 意法半导体 | M24M01-RMN6TP | TSSOP-8 | Same device, ST label |
| 意法半导体 | M24M02-DRMN6TP | TSSOP-8 | 2Mbit version, double density |
| 微型芯片 | AT24C1024C-MAHM-T | TSSOP-8 | 1Mbit I2C EEPROM, 1MHz mode |
| onsemi | CAT24C256WI-GT3 | TSSOP-8 | 256Kbit I2C EEPROM, smaller density |
| 瑞萨 | BR24G1M-3ACWE2 | TSSOP-8 | 1Mbit I2C EEPROM, 1.7V min |
品牌:
封装:
货运周期：3~7 天
最低订购量为 1
品牌:
封装:
货运周期：3~7 天
最低订购量为 1
品牌:
封装:
货运周期：3~7 天
最低订购量为 1
品牌:
封装:
货运周期：3~7 天
最低订购量为 1
品牌:
封装:
货运周期：3~7 天
最低订购量为 1
English English 
简体中文
Español
العربية
Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.
If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.
Settlement Currency
US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.
Bank Charges
All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.
Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.
MOQ & Sample Service
We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.
Packaging Standard
All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.
Import Duties & Taxes
All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.
Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.
