IRLML6401TRPBF


P-ch MOSFET، -12 فولت، -12 فولت، -4.3 أمبير، 50mΩ@-4.5V، 10nC Qg، SOT-23، مفتاح تحميل/دسي-دي سي

139501

المخزون الفعال

Image for reference only

جزء الشركة المصنعة : جزء الشركة المصنعة

IRLML6401TRPBF

الحزمة : الحزمة

SOT-23 / Micro3 / TO-236AB (2.9 × 1.3 × 1.0 مم، 1.9 مم، 1.9 مم)

العلامة التجارية : العلامة التجارية
توصيات أخرى قد تكون مهتماً بها.
الوصف

The IRLML6401TRPBF from Infineon Technologies (formerly International Rectifier) is a -12 V P-channel enhancement-mode HEXFET power MOSFET in a 3-pin SOT-23 (Micro3) package. Key specifications include -12 V drain-source voltage, -4.3 A continuous drain current, 50 mΩ maximum RDS(on) at VGS = -4.5 V, -0.55 V typical threshold voltage, 10 nC total gate charge, and 1.3 W power dissipation. The device uses trench MOSFET technology for ultra-low on-resistance. Operating temperature range is -55°C to +150°C (TJ). The TRPBF suffix denotes tape-and-reel, Pb-free, halogen-free packaging.

The IRLML6401 from Infineon (originally International Rectifier) is a P-channel power MOSFET in the industry-standard SOT-23 (Micro3) surface-mount package. The IRLML6401TRPBF is the tape-and-reel, Pb-free, halogen-free version. It is one of the most popular P-channel MOSFETs for low-voltage load switching applications, with extensive multi-source availability.

The -12 V drain-source rating and -4.3 A continuous current capability make it ideal for Li-ion battery-powered applications where a high-side P-channel switch is needed. The 50 mΩ maximum RDS(on) at VGS = -4.5 V results in only 215 mW of conduction loss at 4.3 A, well within the 1.3 W package rating with modest PCB copper area.

The low threshold voltage (VGS(th) = -0.55 V typical, -1.0 V maximum) allows the IRLML6401 to be driven directly from 1.8 V logic. At VGS = -2.5 V, RDS(on) increases to approximately 80-90 mΩ but remains usable for moderate current loads, making 1.8 V/2.5 V GPIO-driven load switches practical.

The 10 nC total gate charge enables switching frequencies up to several hundred kHz with minimal gate-drive loss, suitable for DC-DC converter applications where a P-channel high-side switch is preferred over a bootstrap-driven N-channel.

The SOT-23 package provides RθJA of approximately 75-100°C/W depending on PCB layout. With the large drain tab soldered to a copper pour with thermal vias, the device can handle its full rated current in continuous operation.

Note: Infineon has designated the IRLML6401TRPBF-1 as discontinued (replaced by IRLML6401TRPBF). However, the device remains widely available from distributors with over 139K units in stock at Farnell alone. Multiple second-source manufacturers (VBsemi, Kexin, Born) produce compatible versions.

**P-Channel Enhancement MOSFET:** The IRLML6401 is a P-channel enhancement-mode MOSFET. Current flows from source to drain when the gate-source voltage is negative (VGS 0.6 V. This diode is relevant in half-bridge and synchronous rectifier applications where it conducts during dead time.

دبوس الاسم النوع الوصف
1 البوابة I Gate input; controls channel formation; VGS(th) = -0.55V typ; VGS max ±8V; 10nC gate charge; ESD protected; drive from MCU GPIO through series resistor
2 المصدر P Source terminal; typically connected to VCC rail (high-side switch); current flows from source to drain when on; body diode anode
3 الصرف O Drain terminal; connects to load; -4.3A continuous; -12V max VDS; body diode cathode; large tab for thermal dissipation on PCB
التطبيق الوصف
High-Side Load Switch P-channel as high-side switch between battery and load; MCU GPIO drives gate through resistor; source to battery, drain to load; no charge pump needed; 50mΩ at -4.5V gives <50mV drop at 1A; suitable for 3.3V/5V subsystem power control
Battery Protection / Reverse Polarity Prevent reverse battery connection; P-channel in series with battery; gate tied through Zener to source; conducts only when battery polarity correct; -12V rating covers single-cell Li-ion
DC-DC Converter High-Side Switch P-channel high-side in async buck or inverting buck-boost; 10nC Qg supports 200-500kHz switching; gate driven from controller output; use when bootstrap N-channel drive is impractical
الطراز الشركة المصنعة التوافق الفرق الرئيسي
IRLML6402TRPBF إنفينيون Series Variant (20V) -20V VDS; -3.6A ID; 65mΩ@-4.5V; same SOT-23; higher voltage rating; lower current; use for 12V bus applications
SI2301DS-T1-GE3 فيشاي المعادل الوظيفي -20V P-ch; -2.2A; 90mΩ@-4.5V; SOT-23; Vishay-sourced alternative; higher voltage rating
AO3401A Alpha & Omega Competitive Upgrade -30V P-ch; -4.3A; 36mΩ@-4.5V; SOT-23; lower RDS(on); higher voltage; use for improved efficiency
DMG2305UX-13 شركة ديودز البديل التنافسي -20V P-ch; -4.2A; 48mΩ@-4.5V; SOT-23; similar specs; Diodes Inc-sourced alternative
قطع الغيار الموصى بها
N-Channel StrongIRFET, 150V, 104A, 11mΩ RDS(on), TO-220AB, high power

العلامة التجارية:

الحزمة:

TO-220AB (10.67×4.83×9.02 mm, Through-Hole)
متوفر في المخزون:
13762pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

P-Channel power MOSFET, -55V, -12A, 0.175 Ohm RDS(on), TO-220AB, fully avalanche rated

العلامة التجارية:

الحزمة:

TO-220AB (10.54 x 4.69 x 19.30 mm, 3 pins + tab)
متوفر في المخزون:
11526pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

16Kbit SPI F-RAM, 2Kx8, 20MHz, 10^14 endurance, NoDelay writes, 8-TDFN, EEPROM replacement

العلامة التجارية:

الحزمة:

8-TDFN (4×4.5mm)
متوفر في المخزون:
2853pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

-50V P-ch MOSFET, 50mOhm RDS(on), 50A, SOT-223, logic-level gate, automotive

العلامة التجارية:

الحزمة:

SOT-223 (6.5 x 3.5 x 1.6 mm)
متوفر في المخزون:
14947pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

64Kbit SPI F-RAM, 20MHz, 10^14 endurance, NoDelay writes, SOIC-8/DFN-8

العلامة التجارية:

الحزمة:

SOIC-8 (4.9 x 3.9mm) / DFN-8 (4.0 x 3.0mm)
متوفر في المخزون:
13087pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

64Kbit SPI F-RAM, 20MHz, 10^14 endurance, NoDelay writes, 151yr retention, SOIC-8

العلامة التجارية:

الحزمة:

SOIC-8 (4.9 x 3.9 x 1.25mm)
متوفر في المخزون:
14066 قطعة

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

ضمان الجودة

تخضع جميع المكونات الإلكترونية التي نحصل عليها من سلاسل التوريد الشريكة لنا لعمليات فحص صارمة للواردات، ومن خلال الاختبارات الدقيقة، نضمن أن كل ما يتم تسليمه للعملاء هو قطع أصلية أصلية وتفي بمتطلبات الجودة، بالإضافة إلى ذلك، نحتفظ بسجلات فحص كاملة لجعل عملية سلسلة التوريد بأكملها واضحة ويمكن تتبعها.

التصديق
لقد حصلنا على عدد من الشهادات الاحترافية وقمنا ببناء مختبر الاختبار الاحترافي الخاص بنا، وهذا يضمن أن كل منتج نقدمه لعملائنا يلبي أعلى متطلبات الجودة، ونجري الاختبارات وفقًا لإجراءات صارمة لضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان قطع أصلية أصلية، نتعاون أيضًا مع مؤسسات اختبار موثوقة من طرف ثالث لفحص الجودة الصارم، ونولي دائمًا أهمية كبيرة للجودة ونلتزم تمامًا بمعايير الصناعة واللوائح ذات الصلة ومتطلبات ISO 9001: 2015.

الشحن والدفع

تخضع جميع المكونات الإلكترونية التي نحصل عليها من سلاسل التوريد الشريكة لنا لعمليات فحص صارمة للواردات، ومن خلال الاختبارات الدقيقة، نضمن أن كل ما يتم تسليمه للعملاء هو قطع أصلية أصلية وتفي بمتطلبات الجودة، بالإضافة إلى ذلك، نحتفظ بسجلات فحص كاملة لجعل عملية سلسلة التوريد بأكملها واضحة ويمكن تتبعها.

التصديق
لقد حصلنا على عدد من الشهادات الاحترافية وقمنا ببناء مختبر الاختبار الاحترافي الخاص بنا، وهذا يضمن أن كل منتج نقدمه لعملائنا يلبي أعلى متطلبات الجودة، ونجري الاختبارات وفقًا لإجراءات صارمة لضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان قطع أصلية أصلية، نتعاون أيضًا مع مؤسسات اختبار موثوقة من طرف ثالث لفحص الجودة الصارم، ونولي دائمًا أهمية كبيرة للجودة ونلتزم تمامًا بمعايير الصناعة واللوائح ذات الصلة ومتطلبات ISO 9001: 2015.

الخدمة والتغليف

تخضع جميع المكونات الإلكترونية التي نحصل عليها من سلاسل التوريد الشريكة لنا لعمليات فحص صارمة للواردات، ومن خلال الاختبارات الدقيقة، نضمن أن كل ما يتم تسليمه للعملاء هو قطع أصلية أصلية وتفي بمتطلبات الجودة، بالإضافة إلى ذلك، نحتفظ بسجلات فحص كاملة لجعل عملية سلسلة التوريد بأكملها واضحة ويمكن تتبعها.

التصديق
لقد حصلنا على عدد من الشهادات الاحترافية وقمنا ببناء مختبر الاختبار الاحترافي الخاص بنا، وهذا يضمن أن كل منتج نقدمه لعملائنا يلبي أعلى متطلبات الجودة، ونجري الاختبارات وفقًا لإجراءات صارمة لضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان قطع أصلية أصلية، نتعاون أيضًا مع مؤسسات اختبار موثوقة من طرف ثالث لفحص الجودة الصارم، ونولي دائمًا أهمية كبيرة للجودة ونلتزم تمامًا بمعايير الصناعة واللوائح ذات الصلة ومتطلبات ISO 9001: 2015.