LSM6DSLTR

The LSM6DSLTR is an iNEMO 6DoF inertial measurement unit (IMU) from STMicroelectronics in an LGA-14 (2.5x3x0.83 mm) package. It integrates a 3D digital accelerometer (±2/±4/±8/±16 g) and 3D digital gyroscope (±125/±245/±500/±1000/±2000 dps) with 16-bit output. Ultra-low power: 0.65 mA combo high-performance, 3 µA accelerometer-only low-power. Features 4 KB Smart FIFO, embedded pedometer/step counter, significant motion […]

STM32F207ZET

The STM32F207ZET is a high-performance ARM Cortex-M3 microcontroller from STMicroelectronics running at 120 MHz in an LQFP-144 (20×20 mm) package. It features 512 KB Flash, 128 KB SRAM, ART Accelerator for zero-wait-state Flash execution (150 DMIPS, 398 CoreMark). Peripherals: 3x 12-bit ADC (6 MSPS interleaved), 2x 12-bit DAC, 17 timers, 16-stream DMA, 10/100 Ethernet MAC […]

SN74LVC8T245PWR

The SN74LVC8T245PWR is an 8-bit dual-supply bus transceiver with configurable voltage-level shifting and three-state outputs from Texas Instruments in a TSSOP-24 (7.8 x 4.4 mm) package. It features independent VCCA and VCCB supply rails (1.65V-5.5V each) enabling bidirectional translation between any two voltage nodes. Key specs: 200 Mbps max data rate, 6.6 ns typical propagation […]

TLC2252CDR

The TLC2252CDR is the tape and reel (2500/reel) packaged version of the TLC2252CD dual rail-to-rail output micropower operational amplifier from Texas Instruments in an SOIC-8 package. Electrically identical to the TLC2252CD, the R suffix denotes tape and reel packaging for automated SMT production. Built on Advanced LinCMOS process, it features 35 µA/channel supply current, 200 […]

TLC2252CD

The TLC2252CD is a dual rail-to-rail output micropower operational amplifier from Texas Instruments in an SOIC-8 package. Built on Advanced LinCMOS process, it features 35 µA/channel supply current, 200 kHz GBW, 0.12 V/µs slew rate, input bias current of 1 pA typical, and 19 nV/√Hz input noise at 1 kHz. The input common-mode range includes […]

LM5069MM-2/NOPB

The LM5069MM-2/NOPB is a 9V-80V positive hot swap controller with power limiting from Texas Instruments in a VSSOP-10 (3×3 mm) package. It controls an external N-channel MOSFET for inrush current limiting, programmable current limit, and power limiting to ensure MOSFET SOA compliance. Features include programmable UVLO/OVLO with hysteresis, insertion delay timer, fault timer, open-drain PWRGD […]

TLV62569PDDCT

The TLV62569PDDCT is a 2A synchronous step-down buck DC-DC converter from Texas Instruments in a TSOT-23-6 Thin (3.05 x 1.75 mm) package. It operates from 2.5V to 5.5V input with adjustable output from 0.6V to 5.5V, switching at 1.5 MHz in PWM mode with automatic Power Save Mode (PSM) at light loads for high efficiency […]

TPS51200DRC

The TPS51200DRC is a 3A sink/source DDR termination regulator from Texas Instruments in a VSON-10 (3×3 mm) package with exposed thermal pad. It generates the VTT bus termination voltage for DDR, DDR2, DDR3, DDR3L, LPDDR3, and DDR4 memory systems. Key features include VLDOIN range 1.1V-3.5V, ±10 mA buffered REFOUT (VTTREF), remote sensing (VOSNS), droop compensation, […]

MT29F2G08ABAEAWP:E

The MT29F2G08ABAEAWP:E is a 2Gb (256MB) SLC NAND Flash from Micron Technology in a 48-pin TSOP-I package. It features an x8 parallel asynchronous interface compliant with ONFI 1.0, with internal 4-bit ECC, 2,048 blocks of 64 pages (2,112 bytes each), page read time of 25 µs, program time of 200 µs, and erase time of […]

BSS123-7-F

The BSS123-7-F is an N-channel enhancement mode trench MOSFET from Diodes Incorporated featuring 100 V drain-source voltage, 170 mA continuous drain current, 6 Ω RDS(on) at VGS = 10 V, and VGS(th) of 2.0 V max. With 60 pF input capacitance, 300 mW power dissipation, and AEC-Q101 qualification, it is ideal for low-side load switching, […]