首页 > 集成电路 IC > LT3759EMSE#PBF

LT3759EMSE#PBF

宽输入升压/SEPIC/反相 DC/DC 控制器，1.6-42V 输入，100kHz-1MHz 频率，电流模式，PGOOD 输出，MSOP-12 EP，-40C 至 +125C。.

4286

有效库存
转到查询

Image for reference only

制造商零件：

LT3759EMSE#PBF

包装：

MSOP-12 带裸露焊盘（3.0 毫米宽）

品牌：
产品类别：
质量承诺
发货与付款
服务与包装
产品手册
您可能感兴趣的其他建议.

SII9396SCNUC-BAR

302S43W472KV4E

IXTT10N100D2

IS25LP016D-JNLE-TR

IS25WP256D-JLLE

IS62WV51216BLL-55BLI

IS42S16160J-7TLI

IS43TR16256BL-125KBLI

说明

产品概览

LT3759EMSE#PBF 是 Analog Devices（原凌力尔特公司）的一款宽输入电压范围电流模式 DC/DC 控制器。它可在 1.6 V 至 42 V 输入电压范围内工作，可配置为升压、SEPIC 或反相（反激式）转换器。独特的单 FBX 反馈引脚可对正或负输出电压进行编程。它通过内部 LDO 驱动外部 N 沟道 MOSFET，提供高达 4.75 V 的栅极驱动电压。开关频率可编程为 100 kHz 至 1 MHz，具有外部同步功能。.

主要规格

输入电压 1.6 V 至 42 V
拓扑结构 升压 / SEPIC / 反相（反激式）
控制模式 电流模式
开关频率 100 kHz 至 1 MHz（外部电阻器）
输出配置 正极或负极（单个 FBX 引脚）
感应阈值 50 mV（精确）
内部 LDO INTVCC 高达 4.75 V 栅极驱动电源
PGOOD 低电平开漏输出
关机电流 <1 μA
操作 IQ 450 μA typ @ VIN = 12 V
工作温度 -40 °C 至 +125 °C
包装 MSOP-12 裸露焊盘（3.0 毫米宽）

特点

  • 超宽 1.6 V 至 42 V 输入范围，适用于电池和汽车系统
  • 单个 FBX 引脚可编程正或负输出电压
  • 可编程开关频率，外部时钟同步
  • PGOOD 输出用于监测电源状态
  • 可编程软启动和频率折返，用于启动和短路保护
  • 带滞后的可编程输入 UVLO

应用

  • 电信和工业升压/SEPIC/逆变转换器
  • 分布式电源系统
  • 便携式电子设备
  • 汽车动力系统
  • 正或负输出电源
  • 48 V 电信电源

LT3759EMSE#PBF 是 Analog Devices（原凌力尔特公司）的一款宽输入电压范围电流模式 DC/DC 控制器。它可在 1.6V 至 42V 输入电压范围内工作，并可配置为升压、SEPIC 或反相（反激式）拓扑结构。单个 FBX 反馈引脚可编程正或负输出电压。它通过内部 LDO 驱动外部 N 沟道 MOSFET，提供高达 4.75V 的栅极驱动电压。开关频率可编程为 100kHz 至 1MHz，具有外部同步功能。功能包括 PGOOD 输出、可编程软启动、频率折返和 <1uA 关断电流。.

LT3759 采用固定频率电流模式控制。误差放大器将 FBX 引脚反馈与内部基准进行比较，为 PWM 比较器产生误差信号。电流检测放大器通过 SENSE 引脚以 50mV 的精确阈值监控外部 MOSFET 电流，以实现逐周期电流限制。内部 LDO (INTVCC) 通过 VIN 或 DRIVE 引脚为栅极驱动器供电，电压最高可达 4.75V。FBX 窗口比较器监控输出电压，并在超出范围时发出 PGOOD（低电平开漏）信号。SS 引脚设置启动斜坡时间；频率折返限制输出短路时的电感器电流。RT 引脚设置开关频率；SYNC 接受外部时钟。.

针脚 MSOP-12 功能 说明
1 SS 软启动 外部上限设置启动时间
2 RT 频率设置 电阻器设置 100kHz~1MHz
3 同步 同步 外部时钟输入
4 EN/UVLO 启用/欠压锁定 带滞后的可编程阈值
5 VIN 输入电源 1.6V~42V
6 INTVCC 内部 LDO 输出 栅极驱动电源；最大 4.75V
7 驱动器 驱动电源输入 INTVCC 信号源：VIN 或 DRIVE
8 GATE 栅极驱动输出 驱动外部 N 沟道 MOSFET
9 感知 电流感应 50mV 精确阈值
10 接地 地面 -
11 FBX 反馈输入 用于 + 或 - 输出编程的单引脚
12 PGOOD 电源良好 低电平开漏输出
EP 接地 外露焊盘 热和电气接地
  • 电信和工业升压/SEPIC/逆变转换器
  • 分布式电源系统
  • 便携式电子设备
  • 汽车动力系统
  • 正或负输出电源
  • 48 伏电信电源
模型 类型 说明
lt3759emse#trpbf 相同部分 卷带包装
LT3759IMSE#PBF 同一家庭 工业级 -40C~+125C
LT3757 功能等价物. 早期 LTC 升压/降压控制器
LT8330 功能等价物. LTC 内部开关升压；1A；3-40V
LM5155 功能等价物. TI 升压/SEPIC 控制器；42V 输入
推荐部件

SII9396SCNUC-BAR

HDMI 2.0 Bridge, 4K@60Hz, HDCP 2.2 Repeater, MHL 3.0, 76-pin QFN EP

品牌:

封装:

76-Pin QFN EP (9.0 x 9.0 x 0.83 mm)
有库存：
6848pcs

货运周期：3~7 天
最低订购量为 1

转到查询

302S43W472KV4E

4700pF 3000V X7R MLCC, 10%, 1812, high-voltage TANCERAM, -55 to 125C, tape and reel

品牌:

封装:

1812 (4.50 x 3.18 x 2.80 mm)
有库存：
4146pcs

货运周期：3~7 天
最低订购量为 1

转到查询

IXTT10N100D2

N-Channel depletion-mode MOSFET, 1000V, 10A, 1.5Ohm, normally-on, TO-268AA, 695W

品牌:

封装:

TO-268AA / D3PAK (15.75 x 13.08 x 4.83 mm)
有库存：
14959pcs

货运周期：3~7 天
最低订购量为 1

转到查询

IS25LP016D-JNLE-TR

16Mbit SPI NOR Flash, 3V, QSPI/QPI, 133MHz, DTR, SOIC-8 150mil, -40 to 105C, TR

品牌:

封装:

8-SOIC (4.90 x 3.90 x 1.75 mm, 150mil)
有库存：
11082pcs

货运周期：3~7 天
最低订购量为 1

转到查询

IS25WP256D-JLLE

256Mbit SPI NOR Flash, 1.8V, QPI/QSPI, 104MHz, DTR, WSON-8 6x8mm, -40 to 105C

品牌:

封装:

8-WSON (6.0 x 8.0 x 0.73 mm, exposed pad)
有库存：
13368pcs

货运周期：3~7 天
最低订购量为 1

转到查询

IS62WV51216BLL-55BLI

8Mbit async SRAM, 512Kx16, 2.5-3.6V, 55ns, ultra-low power, 48-mini BGA, Industrial

品牌:

封装:

48-Mini BGA (7.2 x 8.7 x 0.9 mm)
有库存：
3838pcs

货运周期：3~7 天
最低订购量为 1

转到查询
质量保证

Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.

1. Authorized & Genuine Sourcing Promise

All of our electronic components are procured from official authorized distributors and original manufacturers. We strictly reject counterfeits, refurbished parts, disassembled components and gray-market goods. Every product is guaranteed to be brand-new original parts and fully consistent with the original technical parameters. For branded products such as NXP IC series, we maintain complete supply channel documents to realize full product traceability.

2. Strict Full-batch Quality Inspection

We implement 100% full-batch quality control for all goods before shipment. Our professional QC team conducts multi-dimensional tests including appearance inspection, electrical parameter testing, performance verification and packaging check. Each batch of components is attached with complete inspection reports and batch records. We stick to zero-tolerance standards for defective products to ensure every piece of component meets industrial application requirements.

3. Industry Standard Compliance

Our products comply with a variety of international industry quality standards to adapt to high-standard application scenarios:
  • 汽车电子: All automotive-grade components pass AEC-Q series certification, featuring excellent stability and durability to adapt to complex vehicle operating environments.
  • 医疗设备: High-reliability components meet medical industry safety and compliance regulations, ensuring stable operation for medical equipment.
  • Industrial Control & Consumer Electronics: Products conform to universal international electronic industry standards, suitable for long-term continuous operation of various equipment.

4. Professional Reliability Control

For static-sensitive, moisture-sensitive and precision components such as ICs, PCBs, sensors and connectors, we carry out reliability screening in advance. Combined with standardized ESD anti-static packaging and vacuum moisture-proof packaging, we avoid component damage caused by static electricity, dampness or collision during storage and transportation, and retain the original performance of products.

5. Traceability Management System

We establish a complete product traceability system. Each batch of goods corresponds to independent batch number, sourcing record, inspection record and delivery record. Customers can query the whole lifecycle information of components at any time. This system effectively solves quality risks and facilitates after-sales handling and production quality control for your company.

6. After-sales Quality Guarantee

If any product is confirmed to have non-conformity quality problems due to our reasons after receipt, we provide free return, exchange and supplementary delivery services. Our professional quality team will also conduct root cause analysis to optimize our quality control process. We respond to quality feedback within 24 hours to resolve your worries efficiently.

联系我们

If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:

 

Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China

 

发货与付款

Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.

1. Payment Terms

We offer a variety of secure and convenient payment methods to meet diverse business cooperation needs. Details are as follows:
  1. Accepted Payment Methods
  • T/T (Bank Wire Transfer): The primary settlement method for bulk orders and a widely used international payment channel.
  • PayPal: Ideal for small orders, sample orders and quick payments.

  1. Settlement Currency

     

    US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.

  2. Bank Charges

     

    All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.

  3. Payment Requirements
  • Sample and small orders: Shipment will be arranged upon full payment.
  • In-stock bulk orders: Goods will be delivered within 2 to 3 working days after full payment.

2. Shipping & Delivery

We partner with leading global logistics providers to ensure safe and fast delivery worldwide. Relevant details are listed below:
  1. Logistics Partners
  • International Express: DHL, FedEx, UPS, TNT
  • Economy Logistics: Air freight and sea freight for large-volume cargo
  • Domestic Delivery: SF Express, Yunda Express
  1. Order Processing Time
  • In-stock items: Orders confirmed and fully paid before 14:00 (GMT+8) will be shipped on the same day. All other orders will be dispatched within 1 to 2 working days.
  • Out-of-stock or sourced items: The delivery lead time will be confirmed separately according to brand and inventory status.
  1. Estimated Transit Time
  • International Express: 3 – 7 working days globally
  • Air Freight: 7 – 12 working days
  • Sea Freight: 25 – 40 working days for heavy and large bulk cargo
  1. Shipping Fee Rules
  • Shipping cost is calculated based on package weight, volume, destination and delivery method.
  • Both freight prepaid and freight collect are available. Please provide your courier account number in advance if you choose freight collect.
  • Free international express delivery is offered for large orders. Terms for long-term partners can be negotiated separately.
  1. Shipment Tracking
     

    Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.

3. General Order Rules & Notes

  1. MOQ & Sample Service

     

    We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.

  2. Packaging Standard

     

    All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.

4. Customs & Liability Statement

  1. Import Duties & Taxes

     

    All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.

  2. Handling of Lost or Damaged Goods
  • In case of loss or severe damage during transit, please contact us within 48 hours after receiving the tracking information. We will assist you in filing a claim with the logistics provider.
  • We shall not be liable for any losses caused by incorrect delivery address, wrong contact information or the buyer’s refusal to complete customs clearance.

5. Local Pickup in Shenzhen

Local pickup service is available for customers in Shenzhen and surrounding areas:
  • Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong Province, China
  • Business Hours: 09:00 – 18:00, Monday to Friday. Closed on weekends and official public holidays.
  • Notice: Please make an appointment via email or communication tools one day in advance, and present your order information upon pickup.

Contact Information

Email: info@materialparts.com

Tel / WhatsApp: +86 13760382860

服务与包装

Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.

Core Services

1. One-stop Sourcing & BOM Support

We specialize in a full range of passive and active electronic components, including SMD resistors, power resistors, connectors, aviation connectors, LED beads, flexible circuit boards, printed circuit boards, and integrated circuits. Our professional team provides BOM list consolidation, component matching, and alternative model recommendation services. We support sample orders, small-batch trial production, and mass production orders with flexible MOQs to meet diverse procurement needs.

2. Genuine Product Guarantee & Full-process Quality Inspection

All products are sourced from official authorized channels and are 100% original genuine parts. Every batch of goods undergoes strict full-process quality inspection before delivery, with complete batch records and traceability documents provided. Our products comply with AEC-Q standards for automotive electronics and high-reliability specifications for medical devices. We eliminate counterfeits, refurbished parts and defective products from the source to secure your project production.

3. Fast Quotation & Order Processing

Our customer service team responds promptly to inquiries and quotation requests. All in-stock orders will be processed within one working day. We provide stocking reservation services for long-term cooperative customers, effectively solving problems such as component shortages and unstable supply chains.

4. Professional Technical Support

Our senior engineer team provides free technical consultation, model selection guidance and original manufacturer datasheets. We assist customers in solving problems related to product R&D, circuit design and component application, providing reliable technical support for project progress.

5. Sourcing for Special Components

Relying on our global supply chain network, we professionally source scarce components, obsolete parts and customized special components to efficiently solve your procurement difficulties.

6. Global Logistics & Document Services

We cooperate with mainstream international logistics providers including DHL, FedEx, UPS and TNT to achieve fast global delivery. We can provide complete export documents such as customs declaration files, commercial invoices and packing lists to ensure smooth customs clearance for international shipments. Local pickup is also available for customers in Shenzhen, China.

Professional Packaging Standards

Electronic components are sensitive to static electricity, collision, moisture and dust. We adopt industry-standard anti-static packaging solutions to fully ensure the integrity of goods during transportation and storage.

1. General Packaging Specifications

  • All components are packed separately to avoid damage caused by friction and collision;
  • Shockproof buffer materials are added for fragile products to ensure transportation safety;
  • Each package is clearly marked with part number, quantity, batch number and specifications for easy inventory counting and management.

2. Classified Professional Packaging

  • Anti-static Packaging: Static-sensitive components such as chips, circuit boards and sensors are packaged with anti-static bags, shielding boxes and conductive foam in strict accordance with international anti-static standards to prevent static damage.
  • Vacuum Moisture-proof Packaging: Moisture-sensitive components are vacuum-sealed with desiccants to isolate humid air, suitable for ocean transportation and long-term storage.
  • Original Factory Packaging: Integrated circuits of brands such as NXP are delivered with original reels, trays or tubes by default, retaining complete original packaging and adapting to automated SMT production lines.
  • Discrete Device Packaging: Discrete devices such as SMD resistors, power resistors and LEDs are quantitatively and classifiedly packaged with accurate quantity and clear marking.
  • Connector / Aviation Connector Packaging: Hard outer packaging is adopted to prevent pin bending and structural deformation.

3. Custom Packaging Services

We provide value-added services including personalized packaging, custom labeling and re-reeling according to customer requirements, fully matching your production and warehouse management standards.

Contact Information

For service consultation or packaging customization, please feel free to contact us:
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
 

Online Inquiry Form

Support Excel, PDF, CSV format files for full BOM list quotation

Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.

公司名称
洞察力
工业
所有产品
集成电路
工商设备
离散
内存芯片
MPU 和 MCU