CD4047BM

The CD4047BM is a CMOS monostable/astable multivibrator from TI in SOIC-14 (8.65×3.9mm). Operates in monostable (one-shot) or astable (free-running) modes with single external R and C. Timing: T=2.48RC (monostable Q output), T=4.40RC (astable period). Supply: 3V-18V. Features positive/negative edge trigger, retrigger input, master reset, and complementary Q/Q-bar outputs. 50% duty cycle in astable mode. Ultra-low […]

TPS77001DBVR

The TPS77001DBVR is a 50mA ultra-low-Iq LDO from Texas Instruments in SOT-23-5 (2.9×1.6mm). Adjustable output: 1.2V to 5.5V via external resistor divider. PMOS pass element provides 35mV typical dropout at 50mA and 17µA quiescent current (constant across load). EN pin for shutdown (1µA standby). Input: 2.7V to 10V. 3% output accuracy. 60dB PSRR, 190µVrms noise. […]

MCP4725A0T-E/CH

The MCP4725A0T-E/CH is a 12-bit single-channel voltage output DAC with EEPROM from Microchip in SOT-23-6 (2.9×1.6mm). Rail-to-rail output, resistor-string architecture, ±0.2 LSB DNL, ±2 LSB INL. I2C interface: Standard/Fast/High-Speed (100k/400k/3.4M). EEPROM stores DAC settings for power-on recall. Supply: 2.7-5.5V, 210µA operating, 0.06µA power-down. 6µs settling time. A0 pin selects I2C address (0x60/0x61 for A0 variant). […]

MAX7313AEG+T

The MAX7313AEG+T is a 16-port I/O expander with integrated 8-bit PWM LED intensity control, interrupt, and hot-insertion protection from Analog Devices (Maxim) in a QSOP-24 (8.65×3.9 mm) tape and reel package. Each I/O port is individually configurable as a 50 mA/5.5V open-drain current-sink output or logic input with transition detection. PWM dimming: 4-bit global (14 […]

LSM6DSLTR

The LSM6DSLTR is an iNEMO 6DoF inertial measurement unit (IMU) from STMicroelectronics in an LGA-14 (2.5x3x0.83 mm) package. It integrates a 3D digital accelerometer (±2/±4/±8/±16 g) and 3D digital gyroscope (±125/±245/±500/±1000/±2000 dps) with 16-bit output. Ultra-low power: 0.65 mA combo high-performance, 3 µA accelerometer-only low-power. Features 4 KB Smart FIFO, embedded pedometer/step counter, significant motion […]

STM32F207ZET

The STM32F207ZET is a high-performance ARM Cortex-M3 microcontroller from STMicroelectronics running at 120 MHz in an LQFP-144 (20×20 mm) package. It features 512 KB Flash, 128 KB SRAM, ART Accelerator for zero-wait-state Flash execution (150 DMIPS, 398 CoreMark). Peripherals: 3x 12-bit ADC (6 MSPS interleaved), 2x 12-bit DAC, 17 timers, 16-stream DMA, 10/100 Ethernet MAC […]

SN74LVC8T245PWR

The SN74LVC8T245PWR is an 8-bit dual-supply bus transceiver with configurable voltage-level shifting and three-state outputs from Texas Instruments in a TSSOP-24 (7.8 x 4.4 mm) package. It features independent VCCA and VCCB supply rails (1.65V-5.5V each) enabling bidirectional translation between any two voltage nodes. Key specs: 200 Mbps max data rate, 6.6 ns typical propagation […]

TLC2252CDR

The TLC2252CDR is the tape and reel (2500/reel) packaged version of the TLC2252CD dual rail-to-rail output micropower operational amplifier from Texas Instruments in an SOIC-8 package. Electrically identical to the TLC2252CD, the R suffix denotes tape and reel packaging for automated SMT production. Built on Advanced LinCMOS process, it features 35 µA/channel supply current, 200 […]

TLC2252CD

The TLC2252CD is a dual rail-to-rail output micropower operational amplifier from Texas Instruments in an SOIC-8 package. Built on Advanced LinCMOS process, it features 35 µA/channel supply current, 200 kHz GBW, 0.12 V/µs slew rate, input bias current of 1 pA typical, and 19 nV/√Hz input noise at 1 kHz. The input common-mode range includes […]

LM5069MM-2/NOPB

The LM5069MM-2/NOPB is a 9V-80V positive hot swap controller with power limiting from Texas Instruments in a VSSOP-10 (3×3 mm) package. It controls an external N-channel MOSFET for inrush current limiting, programmable current limit, and power limiting to ensure MOSFET SOA compliance. Features include programmable UVLO/OVLO with hysteresis, insertion delay timer, fault timer, open-drain PWRGD […]