نظرة عامة على المنتج
The TC33X-2-104E from Bourns is a 100kOhm 0.1W SMD cermet trimming potentiometer with top adjustment, 270-degree rotation, and 3mm open-frame package.
المواصفات الرئيسية
| النوع | SMD Cermet Trimming Potentiometer (Trimpot) |
| Resistance | 100 kOhm (104 code) |
| Resistance Tolerance | +/-25% |
| Power Rating | 0.1W at 70C |
| Maximum Voltage | 50V DC |
| Temperature Coefficient | +/-250 ppm/C |
| Adjustment Type | Top adjustment |
| Rotation | 270 degrees (+/-20 degrees) |
| Rotation Stops | Yes (-2 style with stops) |
| Resolution | Essentially infinite |
| Contact Resistance Variation | 5% max |
| الحزمة | SMD (J-lead, 3 x 3.6 x 1.2mm) |
| درجة حرارة التشغيل | -40C to +100C |
الميزات
- 3mm size meets EIA/EIAJ standard trimmer footprint
- Cermet resistive element for stability
- Recommended for reflow soldering
- Compatible with pick-and-place and auto-adjustment
- Voltage adjustment in power supplies
- Feedback network trimming
- Op-amp offset adjustment
- Timing circuit calibration
- LM317 adjustable regulator feedback trimmer with 100kOhm range for fine output voltage calibration in bench power supply
- Op-amp inverting gain trimming network where 100kOhm pot adjusts feedback ratio for precise calibration of measurement circuit
- Oscillator frequency calibration with 100kOhm trimmer in RC timing network, rotational stop preventing mis-adjustment during production
- إلكترونيات السيارات: All automotive-grade components pass AEC-Q series certification, featuring excellent stability and durability to adapt to complex vehicle operating environments.
- الأجهزة الطبية: High-reliability components meet medical industry safety and compliance regulations, ensuring stable operation for medical equipment.
- Industrial Control & Consumer Electronics: Products conform to universal international electronic industry standards, suitable for long-term continuous operation of various equipment.
- Accepted Payment Methods
- T/T (Bank Wire Transfer): The primary settlement method for bulk orders and a widely used international payment channel.
- PayPal: Ideal for small orders, sample orders and quick payments.
Settlement Currency
US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.
Bank Charges
All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.
- Payment Requirements
- Sample and small orders: Shipment will be arranged upon full payment.
- In-stock bulk orders: Goods will be delivered within 2 to 3 working days after full payment.
- Logistics Partners
- International Express: DHL, FedEx, UPS, TNT
- Economy Logistics: Air freight and sea freight for large-volume cargo
- Domestic Delivery: SF Express, Yunda Express
- Order Processing Time
- In-stock items: Orders confirmed and fully paid before 14:00 (GMT+8) will be shipped on the same day. All other orders will be dispatched within 1 to 2 working days.
- Out-of-stock or sourced items: The delivery lead time will be confirmed separately according to brand and inventory status.
- Estimated Transit Time
- International Express: 3 – 7 working days globally
- Air Freight: 7 – 12 working days
- Sea Freight: 25 – 40 working days for heavy and large bulk cargo
- Shipping Fee Rules
- Shipping cost is calculated based on package weight, volume, destination and delivery method.
- Both freight prepaid and freight collect are available. Please provide your courier account number in advance if you choose freight collect.
- Free international express delivery is offered for large orders. Terms for long-term partners can be negotiated separately.
- Shipment Tracking
Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.
MOQ & Sample Service
We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.
Packaging Standard
All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.
Import Duties & Taxes
All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.
- Handling of Lost or Damaged Goods
- In case of loss or severe damage during transit, please contact us within 48 hours after receiving the tracking information. We will assist you in filing a claim with the logistics provider.
- We shall not be liable for any losses caused by incorrect delivery address, wrong contact information or the buyer’s refusal to complete customs clearance.
- Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong Province, China
- Business Hours: 09:00 – 18:00, Monday to Friday. Closed on weekends and official public holidays.
- Notice: Please make an appointment via email or communication tools one day in advance, and present your order information upon pickup.
- All components are packed separately to avoid damage caused by friction and collision;
- Shockproof buffer materials are added for fragile products to ensure transportation safety;
- Each package is clearly marked with part number, quantity, batch number and specifications for easy inventory counting and management.
- Anti-static Packaging: Static-sensitive components such as chips, circuit boards and sensors are packaged with anti-static bags, shielding boxes and conductive foam in strict accordance with international anti-static standards to prevent static damage.
- Vacuum Moisture-proof Packaging: Moisture-sensitive components are vacuum-sealed with desiccants to isolate humid air, suitable for ocean transportation and long-term storage.
- Original Factory Packaging: Integrated circuits of brands such as NXP are delivered with original reels, trays or tubes by default, retaining complete original packaging and adapting to automated SMT production lines.
- Discrete Device Packaging: Discrete devices such as SMD resistors, power resistors and LEDs are quantitatively and classifiedly packaged with accurate quantity and clear marking.
- Connector / Aviation Connector Packaging: Hard outer packaging is adopted to prevent pin bending and structural deformation.
التطبيقات
The TC33X-2-104E from Bourns is a 100kOhm surface-mount cermet trimming potentiometer (Trimpot) in the industry-standard 3mm TC33 open-frame package. The X suffix denotes the top-adjustment style with J-lead termination, -2 indicates the rotational stop version (prevents over-rotation beyond the resistive element), 104 is the resistance code (10 x 10^4 = 100kOhm), and E indicates tape and reel packaging (2500 units per 7-inch reel). The cermet (ceramic-metal) resistive element provides good stability over temperature (+/-250 ppm/C) and time, with a power rating of 0.1W at 70C. The -2 rotational stop is preferred in production environments because it prevents the wiper from being driven beyond the resistive track, which could damage the element or create an open circuit. The top-adjustment configuration allows access from the component side of the PCB, making it suitable for post-assembly calibration. The 3mm footprint is the EIA/EIAJ standard, enabling compatibility with automated pick-and-place equipment and the Bourns H-90 adjustment tool. The essentially infinite resolution of the cermet element allows fine voltage adjustments.
The TC33X-2-104E is a three-terminal variable resistor using a cermet (ceramic-metal composite) resistive element deposited on a ceramic substrate. A wiper contact slides along the resistive track when the adjustment screw is rotated, changing the effective resistance between the wiper terminal and each end terminal. In voltage divider mode, the resistive element forms a divider from terminal 1 to terminal 3, with the wiper (terminal 2) tapping off a variable fraction of the applied voltage. The 270-degree mechanical rotation corresponds to the wiper traveling from one end of the resistive track to the other. The -2 rotational stop uses a mechanical clutch that prevents the wiper from being rotated beyond the end of the resistive element, unlike the -1 style which allows continuous rotation. The cermet element consists of metallic particles (typically ruthenium oxide) dispersed in a glass-ceramic matrix, providing a continuous resistive path with essentially infinite resolution (no discrete steps as in digital potentiometers). The +/-25% resistance tolerance reflects the inherent variation in cermet thick-film deposition, but the relative adjustment resolution is much finer.
| دبوس | الاسم | النوع | الوظيفة |
|---|---|---|---|
| 1 | CCW | Terminal | Counter-clockwise end of resistive element |
| 2 | Wiper | Terminal | Adjustable contact (output) |
| 3 | CW | Terminal | Clockwise end of resistive element |
| الشركة المصنعة | رقم الجزء | الحزمة | الملاحظات |
|---|---|---|---|
| Bourns | TC33X-2-103E | SMD-3 | 10kOhm version |
| Bourns | TC33X-1-104E | SMD-3 | Continuous rotation (no stop) |
| فيشاي | TC33X-2-104E | SMD-3 | Cross-reference equivalent |
| Murata | PVG5A104C01R00 | SMD-4 | 100kOhm, similar size |
| BI Technologies | 3362P-1-104LF | SMD-3 | Open-frame, 100kOhm |
قطع الغيار الموصى بها
العلامة التجارية:
الحزمة:
متوفر في المخزون:
دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1
العلامة التجارية:
الحزمة:
متوفر في المخزون:
دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1
العلامة التجارية:
الحزمة:
متوفر في المخزون:
دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1
العلامة التجارية:
الحزمة:
متوفر في المخزون:
دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1
العلامة التجارية:
الحزمة:
متوفر في المخزون:
دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1
العلامة التجارية:
الحزمة:
متوفر في المخزون:
دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1
English English 
简体中文
Español
العربية
ضمان الجودة
Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.
1. Authorized & Genuine Sourcing Promise
2. Strict Full-batch Quality Inspection
3. Industry Standard Compliance
4. Professional Reliability Control
5. Traceability Management System
6. After-sales Quality Guarantee
اتصل بنا
If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
الشحن والدفع
Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.
1. Payment Terms
2. Shipping & Delivery
3. General Order Rules & Notes
4. Customs & Liability Statement
5. Local Pickup in Shenzhen
Contact Information
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
الخدمة والتغليف
Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.
Core Services
1. One-stop Sourcing & BOM Support
2. Genuine Product Guarantee & Full-process Quality Inspection
3. Fast Quotation & Order Processing
4. Professional Technical Support
5. Sourcing for Special Components
6. Global Logistics & Document Services
Professional Packaging Standards
1. General Packaging Specifications
2. Classified Professional Packaging
3. Custom Packaging Services
Contact Information
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
Online Inquiry Form
Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.