FM25040B-GTR

Product Overview The FM25040B-GTR from Infineon Technologies is a 4Kbit F-RAM (Ferroelectric RAM) with SPI interface supporting up to 20MHz clock. With 10^14 write endurance cycles, 151-year data retention at 85°C, and instant write capability, it outperforms EEPROM in both speed and reliability. Key Specifications Capacity 4Kbit (512 x 8) Interface SPI (Mode 0 and […]

1ED020I12-F2

Product Overview The 1ED020I12-F2 from Infineon Technologies is a 2A single-channel isolated IGBT gate driver with 1200V isolation voltage. Featuring >50kV/µs CMTI, DESAT short-circuit protection, and UVLO in a DSO-16 package, it is designed for high-reliability motor drive and inverter applications. Key Specifications Output Peak Current 2A (source/sink) Isolation Voltage 1200V Supply (Output Side) 15V […]

STM32L412R8T6

Product Overview The STM32L412R8T6 from STMicroelectronics is an ultra-low-power ARM Cortex-M4 MCU with FPU running at 80MHz, featuring 128KB Flash and 40KB RAM. With USB 2.0 FS, 12-bit ADC, dual DAC, and multiple low-power modes down to 30nA standby, it is optimized for battery-powered IoT and wearable applications. Key Specifications Core ARM Cortex-M4 @ 80MHz […]

SA58631TK

Product Overview The SA58631TK from NXP Semiconductors is a 1W BTL audio amplifier with integrated DC volume control in an HVQFN-16 (3x3mm) package. Operating from 2.5V-5.5V, it features 32-step digital volume control and 0.1% THD+N for clean audio reproduction in portable devices. Key Specifications Output Power 1W @8Ω, 5V, THD=10% Supply Voltage 2.5V – 5.5V […]

TPS73025DBVT

Product Overview The TPS73025DBVT from Texas Instruments is a 2.5V fixed-output, 200mA ultra-low-noise LDO regulator in an SOT-23-5 package. With 30µVrms output noise, 72dB PSRR, and 150mV dropout voltage, it is designed for noise-sensitive analog and RF applications. Key Specifications Output Voltage 2.5V (fixed) Output Current 200mA Input Voltage 2.7V – 5.5V Dropout Voltage 150mV […]

SSC54-E3

Product Overview The SSC54-E3 from Vishay is a 5A, 40V Schottky rectifier diode in an SMC (DO-214AB) package. With a low forward voltage drop of 0.55V at 5A and 150A surge current rating, it is designed for high-frequency rectification and freewheeling in switching power supplies. Key Specifications Reverse Voltage (VR) 40V Forward Current (IF) 5A […]

LM2576R-ADJ

Product Overview The LM2576R-ADJ from Texas Instruments is a 3A step-down switching voltage regulator with adjustable output from 1.23V to 37V. Operating at 52kHz switching frequency in a TO-263-5 (D2PAK) package, it requires minimal external components and achieves up to 88% efficiency. Key Specifications Input Voltage 4V – 40V Output Current 3A Output Voltage 1.23V […]

TOP250YN

Product Overview The TOP250YN from Power Integrations is a TOPSwitch-GX series offline switcher IC delivering up to 154W (universal input) or 257W (230VAC). It integrates a 700V MOSFET with PWM controller, soft-start, frequency jitter, and multiple protection features in a TO-220-7 package. Key Specifications Max Output Power 154W (universal) / 257W (230VAC) Input Voltage 85-265VAC […]

NCP302045MNTWG

Product Overview The NCP302045MNTWG from onsemi is a 45V, 5A programmable overcurrent protection switch in a DFN-8 (3x3mm) package. Featuring 50mΩ on-resistance, programmable overvoltage protection, thermal shutdown, and -60V reverse polarity protection, it is designed for automotive and industrial power rail protection. Key Specifications Input Voltage 4.5V – 45V Current Limit 0.5A – 5A (programmable) […]

NCP45520IMNTWG-H

Product Overview The NCP45520IMNTWG-H from onsemi is a 5.5V, 5A integrated load switch with 16mΩ on-resistance in a WDFN-6 (2x2mm) package. It features adjustable slew rate control and integrated output discharge for safe power rail sequencing in portable and computing applications. Key Specifications Input Voltage 0.75V – 5.5V Maximum Current 5A On-Resistance 16mΩ (typ) @5V […]