即时报价

首页 > 集成电路 IC > 模拟线性集成电路 > MAX660CSA+

MAX660CSA+

Charge-pump voltage inverter/doubler, 1.5-5.5V in, 100mA out, SOIC-8

5455

有效库存
转到查询

Image for reference only

制造商零件：

MAX660CSA+

包装：

8-SOIC (4.9 x 3.9 x 1.75 mm, SA package)

品牌：
产品类别：
质量承诺
发货与付款
服务与包装
产品手册
您可能感兴趣的其他建议.

MMSZ5263BT1G

SMBJ60A-13-F

KSZ8863RLL

PIC16F1823-E/SL

H57V2562GTR-75C

LT1963AES8

XC7Z010-1CLG400I

UCC2804DTR

说明

产品概览

The MAX660CSA+ from Analog Devices (Maxim) is a monolithic CMOS charge-pump voltage converter that inverts or doubles an input voltage from 1.5V to 5.5V at up to 100mA output current in an 8-pin SOIC package.

主要规格

功能 Charge-Pump Voltage Inverter / Doubler
输入电压 1.5V to 5.5V
Output Voltage -VIN (inverter) or 2x VIN (doubler)
输出电流 100 mA (max)
Conversion Efficiency 96% (typ, no load)
Output Resistance 6.5 Ohm (typ @ 5V, +25C)
Oscillator Frequency 10 kHz (internal) or up to 45kHz (external)
Supply Current 200 uA (typ @ 5V)
包装 8-SOIC (3.9mm width)
工作温度 0 to +70 C

特点

  • Inverts or doubles input voltage
  • 100mA output current capability
  • 96% power conversion efficiency (no load)
  • Only 2 external capacitors required
  • Internal oscillator (10kHz) or external clock
  • Replace ICL7660 with improved performance
  • 6.5 Ohm output resistance (half of ICL7660)

应用

  • Negative supply from positive rail (op-amp bias)
  • 5V to -5V conversion for RS-232
  • Battery voltage doubling
  • LCD contrast adjustment

The MAX660CSA+ from Analog Devices (Maxim) is a monolithic CMOS charge-pump voltage converter that can invert a positive input voltage to its negative equivalent (e.g., +5V to -5V) or double the input voltage (e.g., +3V to +6V). The device requires only two external capacitors (typically 10uF to 150uF) for operation, making it one of the simplest voltage conversion solutions available. The MAX660 improves upon the classic ICL7660 with half the output resistance (6.5 Ohm typical vs. 12-15 Ohm for ICL7660 at 5V), delivering higher output current at lower voltage drop. The 100mA maximum output current and 96% no-load conversion efficiency make it suitable for moderate-power negative rail generation in op-amp circuits, RS-232 transceivers, and data acquisition systems. The internal oscillator operates at 10kHz, but the FC (frequency control) pin allows an external capacitor to increase the frequency up to 45kHz for lower output ripple, or an external clock can drive the OSC pin for precise frequency control. In inverter mode, the output voltage is approximately -VIN + (IOUT x ROUT), where ROUT is the output resistance. For example, with VIN=5V and IOUT=50mA, VOUT = -5V + (0.05A x 6.5Ohm) = -4.675V. In doubler mode, the output is approximately 2xVIN – (IOUT x ROUT). The MAX660CSA+ operates over the 0 to +70C temperature range and is available in an 8-pin SOIC package.

The MAX660CSA+ operates using a flying-capacitor charge-pump (also called switched-capacitor) technique. Key subsystems include: (1) Charge Pump – the core of the device is a network of CMOS switches that alternately charge and discharge an external ‘flying’ capacitor (C1); during phase 1, C1 is connected between VIN and GND and charges to VIN; during phase 2, C1 is reconnected with its positive terminal to GND and negative terminal to the output; this effectively ‘pumps’ charge from VIN to VOUT, creating a negative output voltage; (2) Output Filter – a second external capacitor (C2) smooths the output voltage ripple; the ripple amplitude is approximately IOUT / (fOSC x C2); larger C2 or higher oscillator frequency reduces ripple; (3) Oscillator – the internal RC oscillator runs at approximately 10kHz; the FC pin selects between 10kHz (FC=V+ or open) and 45kHz (FC=GND) operation; alternatively, an external clock (up to 150kHz) can be applied to the OSC pin; higher frequencies reduce output ripple and allow smaller capacitors but increase supply current; (4) Doubler Mode – in voltage doubler configuration, the flying capacitor is charged to VIN during phase 1, and during phase 2 it is stacked on top of VIN (series-connected), producing approximately 2 x VIN at the output; the output capacitor C2 filters the result; (5) Efficiency – the conversion efficiency is determined by the ratio of output resistance to load resistance; at no load, efficiency is 96% (only quiescent current loss); at full load, efficiency decreases because more power is dissipated in the output resistance.

针脚 名称 功能
1 FC Frequency control (open/V+ = 10kHz, GND = 45kHz)
2 CAP+ Positive terminal of flying capacitor C1
3 接地 地面
4 CAP- Negative terminal of flying capacitor C1
5 VOUT Negative output voltage (inverter mode)
6 LV Low-voltage operation (GND for VIN > 3.5V, V+ for VIN < 3.5V)
7 OSC Oscillator input (external clock) or capacitor for freq adj
8 V+ Positive supply voltage (1.5V to 5.5V)
  • Op-amp dual supply: +5V to -5V at 50mA for dual-supply op-amp circuits with only 2 external capacitors
  • RS-232: +5V to -5V at 20mA for negative rail of 3.3V/5V RS-232 transceiver
  • Battery doubler: 3V lithium cell to 6V at 50mA for 5V logic systems
  • LCD contrast: +5V to -5V variable output for LCD VEE contrast adjustment
制造商 部件编号 包装 说明
ADI/Maxim MAX660MJA CERDIP-8 Military temperature range
TI LMC7660IN DIP-8 ICL7660 compatible, higher Rout
ADI/Maxim MAX828EUK+T SOT-23-5 Smaller package, 25mA max
ADI/Maxim MAX680CPA DIP-8 Simultaneous +2xVIN and -VIN outputs
推荐部件

LT1963AES8

1.5A adjustable LDO, 1.21-20V out, 340mV dropout, 40µVRMS noise, SOIC-8

品牌:

封装:

SOIC-8 (Narrow, 3.90mm width)
有库存：
7300pcs

货运周期：3~7 天
最低订购量为 1

转到查询

LT1764AEQ-3.3

3A LDO regulator, fixed 3.3V, 340mV dropout, 40µVRMS noise, 2.7-20V input, D2PAK-5

品牌:

封装:

D2PAK-5 (DD-Pak, TO-263-5)
有库存：
4200pcs

货运周期：3~7 天
最低订购量为 1

转到查询

AD8666ARZ

Dual JFET-input precision op-amp, 4MHz GBW, 1pA Ibias, 100µV Vos, 5-16V, RR output, SOIC-8

品牌:

封装:

SOIC-8 (Narrow, 3.90mm width)
有库存：
5800pcs

货运周期：3~7 天
最低订购量为 1

转到查询

AD824ARZ-14

Quad rail-to-rail output op-amp, 2MHz GBW, 1.5µA/amplifier, 3-36V, SOIC-14

品牌:

封装:

SOIC-14
有库存：
8900pcs

货运周期：3~7 天
最低订购量为 1

转到查询

ADUM141E0BRWZ

Quad digital isolator, iCoupler, 5000Vrms, 150Mbps, 13ns prop delay, 3/1 ch config, SOIC-16W

品牌:

封装:

SOIC-16W (10.3 x 7.5 mm)
有库存：
7600pcs

货运周期：3~7 天
最低订购量为 1

转到查询

MAX3232ESE+

3.0-5.5V RS-232 transceiver, 2Tx/2Rx, 1Mbps, ±15kV ESD, SOIC-16, 4×0.1µF caps

品牌:

封装:

SOIC-16 (narrow)
有库存：
12400pcs

货运周期：3~7 天
最低订购量为 1

转到查询
质量保证

Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.

1. Authorized & Genuine Sourcing Promise

All of our electronic components are procured from official authorized distributors and original manufacturers. We strictly reject counterfeits, refurbished parts, disassembled components and gray-market goods. Every product is guaranteed to be brand-new original parts and fully consistent with the original technical parameters. For branded products such as NXP IC series, we maintain complete supply channel documents to realize full product traceability.

2. Strict Full-batch Quality Inspection

We implement 100% full-batch quality control for all goods before shipment. Our professional QC team conducts multi-dimensional tests including appearance inspection, electrical parameter testing, performance verification and packaging check. Each batch of components is attached with complete inspection reports and batch records. We stick to zero-tolerance standards for defective products to ensure every piece of component meets industrial application requirements.

3. Industry Standard Compliance

Our products comply with a variety of international industry quality standards to adapt to high-standard application scenarios:
  • 汽车电子: All automotive-grade components pass AEC-Q series certification, featuring excellent stability and durability to adapt to complex vehicle operating environments.
  • 医疗设备: High-reliability components meet medical industry safety and compliance regulations, ensuring stable operation for medical equipment.
  • Industrial Control & Consumer Electronics: Products conform to universal international electronic industry standards, suitable for long-term continuous operation of various equipment.

4. Professional Reliability Control

For static-sensitive, moisture-sensitive and precision components such as ICs, PCBs, sensors and connectors, we carry out reliability screening in advance. Combined with standardized ESD anti-static packaging and vacuum moisture-proof packaging, we avoid component damage caused by static electricity, dampness or collision during storage and transportation, and retain the original performance of products.

5. Traceability Management System

We establish a complete product traceability system. Each batch of goods corresponds to independent batch number, sourcing record, inspection record and delivery record. Customers can query the whole lifecycle information of components at any time. This system effectively solves quality risks and facilitates after-sales handling and production quality control for your company.

6. After-sales Quality Guarantee

If any product is confirmed to have non-conformity quality problems due to our reasons after receipt, we provide free return, exchange and supplementary delivery services. Our professional quality team will also conduct root cause analysis to optimize our quality control process. We respond to quality feedback within 24 hours to resolve your worries efficiently.

联系我们

If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:

 

Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China

 

发货与付款

Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.

1. Payment Terms

We offer a variety of secure and convenient payment methods to meet diverse business cooperation needs. Details are as follows:
  1. Accepted Payment Methods
  • T/T (Bank Wire Transfer): The primary settlement method for bulk orders and a widely used international payment channel.
  • PayPal: Ideal for small orders, sample orders and quick payments.

  1. Settlement Currency

     

    US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.

  2. Bank Charges

     

    All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.

  3. Payment Requirements
  • Sample and small orders: Shipment will be arranged upon full payment.
  • In-stock bulk orders: Goods will be delivered within 2 to 3 working days after full payment.

2. Shipping & Delivery

We partner with leading global logistics providers to ensure safe and fast delivery worldwide. Relevant details are listed below:
  1. Logistics Partners
  • International Express: DHL, FedEx, UPS, TNT
  • Economy Logistics: Air freight and sea freight for large-volume cargo
  • Domestic Delivery: SF Express, Yunda Express
  1. Order Processing Time
  • In-stock items: Orders confirmed and fully paid before 14:00 (GMT+8) will be shipped on the same day. All other orders will be dispatched within 1 to 2 working days.
  • Out-of-stock or sourced items: The delivery lead time will be confirmed separately according to brand and inventory status.
  1. Estimated Transit Time
  • International Express: 3 – 7 working days globally
  • Air Freight: 7 – 12 working days
  • Sea Freight: 25 – 40 working days for heavy and large bulk cargo
  1. Shipping Fee Rules
  • Shipping cost is calculated based on package weight, volume, destination and delivery method.
  • Both freight prepaid and freight collect are available. Please provide your courier account number in advance if you choose freight collect.
  • Free international express delivery is offered for large orders. Terms for long-term partners can be negotiated separately.
  1. Shipment Tracking
     

    Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.

3. General Order Rules & Notes

  1. MOQ & Sample Service

     

    We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.

  2. Packaging Standard

     

    All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.

4. Customs & Liability Statement

  1. Import Duties & Taxes

     

    All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.

  2. Handling of Lost or Damaged Goods
  • In case of loss or severe damage during transit, please contact us within 48 hours after receiving the tracking information. We will assist you in filing a claim with the logistics provider.
  • We shall not be liable for any losses caused by incorrect delivery address, wrong contact information or the buyer’s refusal to complete customs clearance.

5. Local Pickup in Shenzhen

Local pickup service is available for customers in Shenzhen and surrounding areas:
  • Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong Province, China
  • Business Hours: 09:00 – 18:00, Monday to Friday. Closed on weekends and official public holidays.
  • Notice: Please make an appointment via email or communication tools one day in advance, and present your order information upon pickup.

Contact Information

Email: info@materialparts.com

Tel / WhatsApp: +86 13760382860

服务与包装

Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.

Core Services

1. One-stop Sourcing & BOM Support

We specialize in a full range of passive and active electronic components, including SMD resistors, power resistors, connectors, aviation connectors, LED beads, flexible circuit boards, printed circuit boards, and integrated circuits. Our professional team provides BOM list consolidation, component matching, and alternative model recommendation services. We support sample orders, small-batch trial production, and mass production orders with flexible MOQs to meet diverse procurement needs.

2. Genuine Product Guarantee & Full-process Quality Inspection

All products are sourced from official authorized channels and are 100% original genuine parts. Every batch of goods undergoes strict full-process quality inspection before delivery, with complete batch records and traceability documents provided. Our products comply with AEC-Q standards for automotive electronics and high-reliability specifications for medical devices. We eliminate counterfeits, refurbished parts and defective products from the source to secure your project production.

3. Fast Quotation & Order Processing

Our customer service team responds promptly to inquiries and quotation requests. All in-stock orders will be processed within one working day. We provide stocking reservation services for long-term cooperative customers, effectively solving problems such as component shortages and unstable supply chains.

4. Professional Technical Support

Our senior engineer team provides free technical consultation, model selection guidance and original manufacturer datasheets. We assist customers in solving problems related to product R&D, circuit design and component application, providing reliable technical support for project progress.

5. Sourcing for Special Components

Relying on our global supply chain network, we professionally source scarce components, obsolete parts and customized special components to efficiently solve your procurement difficulties.

6. Global Logistics & Document Services

We cooperate with mainstream international logistics providers including DHL, FedEx, UPS and TNT to achieve fast global delivery. We can provide complete export documents such as customs declaration files, commercial invoices and packing lists to ensure smooth customs clearance for international shipments. Local pickup is also available for customers in Shenzhen, China.

Professional Packaging Standards

Electronic components are sensitive to static electricity, collision, moisture and dust. We adopt industry-standard anti-static packaging solutions to fully ensure the integrity of goods during transportation and storage.

1. General Packaging Specifications

  • All components are packed separately to avoid damage caused by friction and collision;
  • Shockproof buffer materials are added for fragile products to ensure transportation safety;
  • Each package is clearly marked with part number, quantity, batch number and specifications for easy inventory counting and management.

2. Classified Professional Packaging

  • Anti-static Packaging: Static-sensitive components such as chips, circuit boards and sensors are packaged with anti-static bags, shielding boxes and conductive foam in strict accordance with international anti-static standards to prevent static damage.
  • Vacuum Moisture-proof Packaging: Moisture-sensitive components are vacuum-sealed with desiccants to isolate humid air, suitable for ocean transportation and long-term storage.
  • Original Factory Packaging: Integrated circuits of brands such as NXP are delivered with original reels, trays or tubes by default, retaining complete original packaging and adapting to automated SMT production lines.
  • Discrete Device Packaging: Discrete devices such as SMD resistors, power resistors and LEDs are quantitatively and classifiedly packaged with accurate quantity and clear marking.
  • Connector / Aviation Connector Packaging: Hard outer packaging is adopted to prevent pin bending and structural deformation.

3. Custom Packaging Services

We provide value-added services including personalized packaging, custom labeling and re-reeling according to customer requirements, fully matching your production and warehouse management standards.

Contact Information

For service consultation or packaging customization, please feel free to contact us:
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
 

Online Inquiry Form

Support Excel, PDF, CSV format files for full BOM list quotation

Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.

公司名称
洞察力
工业
所有产品
集成电路
工商设备
离散
内存芯片
MPU 和 MCU