首页 > 集成电路 IC > LMR14030SDDAR

LMR14030SDDAR

Buck Converter, 40V 3.5A, 2.2MHz, 25uA Iq, SO-8 PP

6789

有效库存
转到查询

Image for reference only

制造商零件：

LMR14030SDDAR

包装：

SO PowerPAD-8 (4.9 x 3.9 x 1.5 mm)

品牌：
产品类别：
质量承诺
发货与付款
服务与包装
产品手册
您可能感兴趣的其他建议.

46114-4241

43045-0414

43045-2028

43045-1401

76990-5020

204365-0010

2032634185

43650-0419

说明

产品概览

The LMR14030SDDAR from Texas Instruments is a 40V, 3.5A step-down DC-DC converter with 2.2MHz switching frequency and 25uA quiescent current in an SO PowerPAD-8 package.

主要规格

类型 40V, 3.5A Step-Down DC-DC Converter
输入电压 4 V to 40 V
输出电流 3.5 A (continuous)
Output Voltage Adjustable (down to 1.25V)
开关频率 200 kHz to 2.2 MHz (programmable)
Minimum On-Time 75 ns
静态电流 25 uA (typical, standby)
关机电流 1 uA (typical)
Reference Voltage 0.75 V (typical)
Efficiency Up to 92% @ VIN=12V, VOUT=5V, 3.5A
包装 SO PowerPAD-8 (DDA)
工作温度 -40C to +125C

特点

  • 4V to 40V wide input range
  • 3.5A continuous output current
  • 2.2MHz maximum switching frequency
  • 25uA ultra-low quiescent current in standby
  • 75ns minimum on-time for high step-down ratios
  • Integrated 70mOhm NMOS switch
  • Programmable switching frequency via RT pin
  • Internal loop compensation

应用

  • Automotive and industrial power supplies
  • Distributed power architecture point-of-load
  • Battery-powered systems
  • FPGA and processor power rails

The LMR14030SDDAR from Texas Instruments is a 40V, 3.5A synchronous step-down (buck) DC-DC converter in a thermally-enhanced SO PowerPAD-8 package. The wide 4V to 40V input range accommodates automotive 12V/24V batteries and industrial 24V/36V supplies. The 3.5A output current supports medium-power loads including FPGAs, processors, and motor drivers. The programmable switching frequency from 200 kHz to 2.2 MHz allows designers to optimize between efficiency (lower frequency) and solution size (higher frequency). The 75 ns minimum on-time enables high step-down conversion ratios at high switching frequencies (e.g., 36V to 1.2V at 2.2 MHz). The 25 uA standby quiescent current and 1 uA shutdown current minimize battery drain in always-on applications. The integrated 70 mOhm NMOS power switch eliminates the need for an external MOSFET. Internal loop compensation simplifies the design. The PowerPAD package provides low thermal resistance for reliable operation at high output currents.

The LMR14030SDDAR uses a peak-current-mode control architecture with an integrated high-side NMOS power switch and a low-side NMOS synchronous rectifier. The control loop operates as follows: the error amplifier compares the feedback voltage (FB pin) with the internal 0.75V reference, generating a control voltage that sets the peak switch current threshold. At the start of each switching cycle, the high-side NMOS turns on and inductor current ramps up. When the inductor current reaches the peak threshold (set by the error amplifier), the high-side NMOS turns off and the low-side synchronous rectifier turns on, allowing inductor current to ramp down. The switching frequency is set by an external resistor on the RT pin, which programs an internal oscillator. The peak-current-mode control provides inherent cycle-by-cycle current limiting and fast transient response. The internal loop compensation network stabilizes the converter over a wide range of output capacitances and inductor values. The 25 uA standby mode is entered when the FB voltage drops below the regulation threshold, reducing switching frequency to maintain regulation with minimum switching losses.

针脚 名称 类型 功能
1 BOOT 电源 Bootstrap capacitor for high-side gate drive
2 VIN 电源 Input supply (4-40V)
3 SW 输出 Switch node (inductor connection)
4 接地 电源 Ground (connected to PowerPAD)
5 FB 输入 Feedback voltage (0.75V reference)
6 EN/UVLO 输入 Enable / undervoltage lockout
7 RT 输入 Switching frequency programming resistor
8 PG 输出 Power good indicator (open-drain)
  • 24V industrial to 5V/3.3V POL converter at 2.2MHz for compact design
  • 12V automotive battery to 3.3V MCU supply with 25uA standby current
  • 48V telecom intermediate bus to 12V distribution with 3.5A output
  • FPGA 1.2V core supply from 5V input with 75ns minimum on-time
制造商 部件编号 包装 说明
TI LMR14050SDDAR SO-8 PP 5A version, higher current
TI LMR16030SDDAR SO-8 PP 60V input, lower current
TI LMR23630ADDAR SO-8 PP 36V, 3A, similar class
Monolithic Power MP8759GD-Z SOIC-8 36V, 5A, alternative
Richtek RT6208GQW DFN-10 36V, 2A, smaller package
推荐部件

46114-4241

Molex EXTreme LPHPower vertical receptacle, 4 power + 24 signal, 30A, 1A, 250V, board-to-board

品牌:

封装:

Through Hole, Vertical, 7.50mm profile
有库存：
2894pcs

货运周期：3~7 天
最低订购量为 1

转到查询

43045-0414

Molex Micro-Fit 3.0 header, 4 circuits, 3.0mm pitch, dual row, vertical, tin, TH

品牌:

封装:

Through Hole, Vertical, 3.0mm pitch, dual row
有库存：
8637pcs

货运周期：3~7 天
最低订购量为 1

转到查询

43045-2028

Molex Micro-Fit 3.0 header, 20 circuits, 3.0mm pitch, dual row, vertical, tin, TH

品牌:

封装:

Through Hole, Vertical, 3.0mm pitch, dual row
有库存：
3891pcs

货运周期：3~7 天
最低订购量为 1

转到查询

43045-1401

Molex Micro-Fit 3.0 header, 14 circuits, 3.0mm pitch, dual row, vertical, tin, TH

品牌:

封装:

Through Hole, Vertical, 3.0mm pitch, dual row
有库存：
4527pcs

货运周期：3~7 天
最低订购量为 1

转到查询

76990-5020

Molex Impact 76990 backplane receptacle, 150 pos, 25 Gbps, 100Ω, press-fit, RA orthogonal

品牌:

封装:

Board Edge, Through Hole, Press-Fit, Right Angle (28.35 × 32.2 × 23.1 mm)
有库存：
2156pcs

货运周期：3~7 天
最低订购量为 1

转到查询

204365-0010

Schurter subminiature fuse, 250VAC, PCB mount, quick-acting/time-lag options

品牌:

封装:

PCB THT/SMD (5×20mm or subminiature)
有库存：
6738pcs

货运周期：3~7 天
最低订购量为 1

转到查询
质量保证

Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.

1. Authorized & Genuine Sourcing Promise

All of our electronic components are procured from official authorized distributors and original manufacturers. We strictly reject counterfeits, refurbished parts, disassembled components and gray-market goods. Every product is guaranteed to be brand-new original parts and fully consistent with the original technical parameters. For branded products such as NXP IC series, we maintain complete supply channel documents to realize full product traceability.

2. Strict Full-batch Quality Inspection

We implement 100% full-batch quality control for all goods before shipment. Our professional QC team conducts multi-dimensional tests including appearance inspection, electrical parameter testing, performance verification and packaging check. Each batch of components is attached with complete inspection reports and batch records. We stick to zero-tolerance standards for defective products to ensure every piece of component meets industrial application requirements.

3. Industry Standard Compliance

Our products comply with a variety of international industry quality standards to adapt to high-standard application scenarios:
  • 汽车电子: All automotive-grade components pass AEC-Q series certification, featuring excellent stability and durability to adapt to complex vehicle operating environments.
  • 医疗设备: High-reliability components meet medical industry safety and compliance regulations, ensuring stable operation for medical equipment.
  • Industrial Control & Consumer Electronics: Products conform to universal international electronic industry standards, suitable for long-term continuous operation of various equipment.

4. Professional Reliability Control

For static-sensitive, moisture-sensitive and precision components such as ICs, PCBs, sensors and connectors, we carry out reliability screening in advance. Combined with standardized ESD anti-static packaging and vacuum moisture-proof packaging, we avoid component damage caused by static electricity, dampness or collision during storage and transportation, and retain the original performance of products.

5. Traceability Management System

We establish a complete product traceability system. Each batch of goods corresponds to independent batch number, sourcing record, inspection record and delivery record. Customers can query the whole lifecycle information of components at any time. This system effectively solves quality risks and facilitates after-sales handling and production quality control for your company.

6. After-sales Quality Guarantee

If any product is confirmed to have non-conformity quality problems due to our reasons after receipt, we provide free return, exchange and supplementary delivery services. Our professional quality team will also conduct root cause analysis to optimize our quality control process. We respond to quality feedback within 24 hours to resolve your worries efficiently.

联系我们

If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:

 

Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China

 

发货与付款

Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.

1. Payment Terms

We offer a variety of secure and convenient payment methods to meet diverse business cooperation needs. Details are as follows:
  1. Accepted Payment Methods
  • T/T (Bank Wire Transfer): The primary settlement method for bulk orders and a widely used international payment channel.
  • PayPal: Ideal for small orders, sample orders and quick payments.

  1. Settlement Currency

     

    US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.

  2. Bank Charges

     

    All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.

  3. Payment Requirements
  • Sample and small orders: Shipment will be arranged upon full payment.
  • In-stock bulk orders: Goods will be delivered within 2 to 3 working days after full payment.

2. Shipping & Delivery

We partner with leading global logistics providers to ensure safe and fast delivery worldwide. Relevant details are listed below:
  1. Logistics Partners
  • International Express: DHL, FedEx, UPS, TNT
  • Economy Logistics: Air freight and sea freight for large-volume cargo
  • Domestic Delivery: SF Express, Yunda Express
  1. Order Processing Time
  • In-stock items: Orders confirmed and fully paid before 14:00 (GMT+8) will be shipped on the same day. All other orders will be dispatched within 1 to 2 working days.
  • Out-of-stock or sourced items: The delivery lead time will be confirmed separately according to brand and inventory status.
  1. Estimated Transit Time
  • International Express: 3 – 7 working days globally
  • Air Freight: 7 – 12 working days
  • Sea Freight: 25 – 40 working days for heavy and large bulk cargo
  1. Shipping Fee Rules
  • Shipping cost is calculated based on package weight, volume, destination and delivery method.
  • Both freight prepaid and freight collect are available. Please provide your courier account number in advance if you choose freight collect.
  • Free international express delivery is offered for large orders. Terms for long-term partners can be negotiated separately.
  1. Shipment Tracking
     

    Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.

3. General Order Rules & Notes

  1. MOQ & Sample Service

     

    We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.

  2. Packaging Standard

     

    All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.

4. Customs & Liability Statement

  1. Import Duties & Taxes

     

    All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.

  2. Handling of Lost or Damaged Goods
  • In case of loss or severe damage during transit, please contact us within 48 hours after receiving the tracking information. We will assist you in filing a claim with the logistics provider.
  • We shall not be liable for any losses caused by incorrect delivery address, wrong contact information or the buyer’s refusal to complete customs clearance.

5. Local Pickup in Shenzhen

Local pickup service is available for customers in Shenzhen and surrounding areas:
  • Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong Province, China
  • Business Hours: 09:00 – 18:00, Monday to Friday. Closed on weekends and official public holidays.
  • Notice: Please make an appointment via email or communication tools one day in advance, and present your order information upon pickup.

Contact Information

Email: info@materialparts.com

Tel / WhatsApp: +86 13760382860

服务与包装

Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.

Core Services

1. One-stop Sourcing & BOM Support

We specialize in a full range of passive and active electronic components, including SMD resistors, power resistors, connectors, aviation connectors, LED beads, flexible circuit boards, printed circuit boards, and integrated circuits. Our professional team provides BOM list consolidation, component matching, and alternative model recommendation services. We support sample orders, small-batch trial production, and mass production orders with flexible MOQs to meet diverse procurement needs.

2. Genuine Product Guarantee & Full-process Quality Inspection

All products are sourced from official authorized channels and are 100% original genuine parts. Every batch of goods undergoes strict full-process quality inspection before delivery, with complete batch records and traceability documents provided. Our products comply with AEC-Q standards for automotive electronics and high-reliability specifications for medical devices. We eliminate counterfeits, refurbished parts and defective products from the source to secure your project production.

3. Fast Quotation & Order Processing

Our customer service team responds promptly to inquiries and quotation requests. All in-stock orders will be processed within one working day. We provide stocking reservation services for long-term cooperative customers, effectively solving problems such as component shortages and unstable supply chains.

4. Professional Technical Support

Our senior engineer team provides free technical consultation, model selection guidance and original manufacturer datasheets. We assist customers in solving problems related to product R&D, circuit design and component application, providing reliable technical support for project progress.

5. Sourcing for Special Components

Relying on our global supply chain network, we professionally source scarce components, obsolete parts and customized special components to efficiently solve your procurement difficulties.

6. Global Logistics & Document Services

We cooperate with mainstream international logistics providers including DHL, FedEx, UPS and TNT to achieve fast global delivery. We can provide complete export documents such as customs declaration files, commercial invoices and packing lists to ensure smooth customs clearance for international shipments. Local pickup is also available for customers in Shenzhen, China.

Professional Packaging Standards

Electronic components are sensitive to static electricity, collision, moisture and dust. We adopt industry-standard anti-static packaging solutions to fully ensure the integrity of goods during transportation and storage.

1. General Packaging Specifications

  • All components are packed separately to avoid damage caused by friction and collision;
  • Shockproof buffer materials are added for fragile products to ensure transportation safety;
  • Each package is clearly marked with part number, quantity, batch number and specifications for easy inventory counting and management.

2. Classified Professional Packaging

  • Anti-static Packaging: Static-sensitive components such as chips, circuit boards and sensors are packaged with anti-static bags, shielding boxes and conductive foam in strict accordance with international anti-static standards to prevent static damage.
  • Vacuum Moisture-proof Packaging: Moisture-sensitive components are vacuum-sealed with desiccants to isolate humid air, suitable for ocean transportation and long-term storage.
  • Original Factory Packaging: Integrated circuits of brands such as NXP are delivered with original reels, trays or tubes by default, retaining complete original packaging and adapting to automated SMT production lines.
  • Discrete Device Packaging: Discrete devices such as SMD resistors, power resistors and LEDs are quantitatively and classifiedly packaged with accurate quantity and clear marking.
  • Connector / Aviation Connector Packaging: Hard outer packaging is adopted to prevent pin bending and structural deformation.

3. Custom Packaging Services

We provide value-added services including personalized packaging, custom labeling and re-reeling according to customer requirements, fully matching your production and warehouse management standards.

Contact Information

For service consultation or packaging customization, please feel free to contact us:
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
 

Online Inquiry Form

Support Excel, PDF, CSV format files for full BOM list quotation

Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.

公司名称
洞察力
工业
所有产品
集成电路
工商设备
离散
内存芯片
MPU 和 MCU