The AD7705BRZ is a 16-bit Sigma-Delta ADC from Analog Devices with built-in programmable gain amplifier (PGA), gain 1-128, 2 differential input channels, SPI interface, in a DIP-16 package, suitable for low-frequency measurement and sensor interfaces.
The AD7705BRZ is a 2-channel, 16-bit sigma-delta analog-to-digital converter from Analog Devices in a 16-lead wide SOIC package. It integrates a programmable gain amplifier (PGA) with gains from 1 to 128, allowing direct connection of low-level transducer signals without external signal conditioning. The device operates from a single 2.7 V to 3.3 V or 4.75 V to 5.25 V supply, dissipating only 1 mW maximum at 3 V with 8 uA standby current. A 3-wire SPI-compatible serial interface provides simple microcontroller connectivity. Self-calibration and system calibration options eliminate gain and offset errors, making it ideal for low-frequency measurement applications such as pressure, temperature, and weight sensing.
The AD7705BRZ employs a second-order sigma-delta modulator followed by a digital decimation filter to achieve 16-bit resolution with no missing codes. The analog input is first buffered by an optional input buffer (configurable via register) and then applied to the programmable gain amplifier, which amplifies signals from 1x to 128x. The PGA output feeds the sigma-delta modulator, which oversamples the input at a high rate and produces a 1-bit data stream. The digital filter processes this stream to produce a 16-bit output word at the programmed update rate (50 Hz to 500 Hz for a 2.4576 MHz master clock). The first notch frequency of the sinc-3 digital filter can be programmed via the filter register, simultaneously setting the output update rate and the -3 dB frequency. The device performs continuous self-calibration in the background, compensating for offset and gain drift. System calibration modes allow the user to apply zero-scale and full-scale reference points, enabling the AD7705 to calibrate the entire signal path including external components. The input multiplexer selects between two fully differential input channels, and the polarity (unipolar or bipolar) is programmable per channel.
| 针脚 | 名称 | 说明 |
|---|---|---|
| 1 | SCLK | Serial clock input; Schmitt-triggered, SPI-compatible |
| 2 | MCLK IN | Master clock input; connect crystal or external clock (400 kHz to 2.5 MHz) |
| 3 | MCLK OUT | Master clock output; connect crystal between pins 2 and 3 |
| 4 | CS | Chip select; active low, enables the serial interface |
| 5 | 重置 | Reset input; active low, resets all control logic and registers |
| 6 | AIN2(+) | Channel 2 positive analog input |
| 7 | AIN1(+) | Channel 1 positive analog input |
| 8 | AIN1(-) | Channel 1 negative analog input |
| 9 | REFIN(-) | Reference negative input; typically connected to GND or AVSS |
| 10 | REFIN(+) | Reference positive input; sets the full-scale range |
| 11 | AIN2(-) | Channel 2 negative analog input |
| 12 | DIN 标准 | Serial data input; register write data from MCU |
| 13 | DOUT | Serial data output; conversion results read by MCU |
| 14 | DRDY | Data ready output; active low, indicates new conversion data available |
| 15 | VDD | Power supply (2.7 V to 3.3 V or 4.75 V to 5.25 V) |
| 16 | 接地 | 地面参考 |
| 模型 | 制造商 | 渠道 | Resolution | PGA | 包装 |
|---|---|---|---|---|---|
| AD7706BRZ | 模拟器件公司 | 3 | 16-bit | 1-128 | SOIC-16 |
| AD7780 | 模拟器件公司 | 1 | 24-bit | 1-128 | SOIC-8 |
| ADS1115 | 德州仪器 | 4 | 16-bit | 1-8 | VSSOP-10 |
| MCP3424 | 微型芯片 | 4 | 18-bit | 1-8 | SOIC-14 |
| NAU7802 | Nuvoton | 2 | 24-bit | 1-128 | SOP-16 |
AD7705BRZ is a 2-channel 16-bit Σ-Δ ADC from Analog Devices in 16-SOIC with 1mW power at 3V. The AD7706BRZ offers 3 channels (2 differential + 1 pseudo-differential) in the same package. AD7707 adds a DAC output for closed-loop control. For higher resolution, AD7705BRU-5 provides 24-bit in TSSOP-20. The MCP3424 from Microchip offers 4-channel 18-bit ADC with I2C interface as a lower-cost alternative.
品牌:
封装:
货运周期：3~7 天
最低订购量为 1
品牌:
封装:
货运周期：3~7 天
最低订购量为 1
品牌:
封装:
货运周期：3~7 天
最低订购量为 1
品牌:
封装:
货运周期：3~7 天
最低订购量为 1
品牌:
封装:
货运周期：3~7 天
最低订购量为 1
品牌:
封装:
货运周期：3~7 天
最低订购量为 1
English English 
简体中文
Español
العربية
Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.
If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.
Settlement Currency
US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.
Bank Charges
All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.
Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.
MOQ & Sample Service
We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.
Packaging Standard
All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.
Import Duties & Taxes
All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.
Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.
