Inicio > Circuitos integrados IC > SN74HC245N

SN74HC245N

Octal bus transceiver, 3-state, DIR control, 2-6V HC, DIP-20, bidirectional buffering

14498

Inventario efectivo

Ir a la consulta

Image for reference only

Pieza del fabricante：

SN74HC245N

Paquete：

DIP-20 (24.33 x 6.35 x 5.08 mm)

Marca：

Categorías de productos：

Circuitos integrados IC

Otras recomendaciones que pueden interesarle.

SII9396SCNUC-BAR

IS43TR16256BL-125KBLI

Descripción

Productos

The SN74HC245N from Texas Instruments is an octal bus transceiver with 3-state outputs in a DIP-20 package. With active-high and active-low output enable controls and 6mA output drive, it provides bidirectional bus buffering for HC-compatible digital systems.

Especificaciones

Función	Octal bus transceiver with 3-state outputs
Tensión de alimentación	2 V to 6 V
Output Drive	+/-6 mA
Retardo de propagación	12 ns (typical at 5V)
Direction Control	DIR pin (A-to-B or B-to-A)
Temperatura de funcionamiento	-40C to +85C

Características

Octal bidirectional bus transceiver with 3-state outputs
DIR pin selects A-to-B or B-to-A data flow direction
Dual output enable (active-low OE and active-high OE)
HC-compatible CMOS logic with 2-6V supply range
DIP-20 through-hole package for prototyping
6mA output drive for bus interface buffering

Aplicaciones

Microprocessor system address/data bus buffering
Bidirectional level translation between logic domains
Bus isolation and expansion in digital systems
Prototyping and breadboard digital logic design

Introducción del producto:SN74HC245N Presentación del producto

The SN74HC245N from Texas Instruments is an octal bus transceiver with 3-state outputs in a DIP-20 through-hole package. The device provides bidirectional data flow between the A bus (pins A1-A8) and B bus (pins B1-B8), controlled by the DIR (direction) input. When DIR is high, data flows from A to B; when DIR is low, data flows from B to A. The output enable (OE) input, when high, places both A and B outputs in the high-impedance (3-state) condition, effectively isolating the buses. The device operates from 2V to 6V supply voltage with 6mA output drive capability, making it compatible with HC and HCT logic families. The 12ns typical propagation delay at 5V supports moderate-speed bus operations. The DIP-20 package is ideal for prototyping and educational applications where through-hole mounting is preferred.

Principio de funcionamiento:SN74HC245N Principio de funcionamiento

The SN74HC245N uses CMOS transmission gates for bidirectional bus control. (1) Direction Control: The DIR input controls the data flow direction through internal multiplexing. When DIR is high, the A-side buffers are configured as inputs and the B-side buffers as outputs (A-to-B mode). When DIR is low, the B-side buffers are inputs and the A-side buffers are outputs (B-to-A mode). (2) Output Enable: The active-low OE input controls the 3-state output buffers. When OE is low, the selected direction outputs are enabled. When OE is high, both A and B outputs are in the high-impedance state, disconnecting the device from both buses. (3) Bus Isolation: The 3-state capability allows multiple bus transceivers to share the same bus lines. Only one transceiver should be enabled at a time to avoid bus contention. (4) CMOS Structure: The internal buffers use complementary N-channel and P-channel MOSFETs, providing rail-to-rail output swing and low static power consumption.

Descripción de la clavija:SN74HC245N Definición y funciones de las clavijas

Pin	Nombre	Tipo	Función
1	DIR	Entrada	Direction control (H=A-to-B, L=B-to-A)
2-9	A1-A8	E/S	Bus A data lines
10	GND	Suelo	Suelo
11-18	B8-B1	E/S	Bus B data lines
19	OE	Entrada	Output enable (active low)
20	VCC	Potencia	Supply voltage (2-6V)

Application Scenarios:In which products and applications isSN74HC245N usado

Microprocessor system address/data bus buffering with DIR and OE control
Bidirectional level translation between 3.3V and 5V logic domains
Bus isolation and expansion in digital systems with 3-state outputs
Prototyping and breadboard digital logic design in DIP-20 package

Alternative Models:What chips are recommended as replacements for SN74HC245N

Fabricante	Número de pieza	Paquete	Notas
TI	SN74HC245DW	SOIC-20	Surface-mount version
Nexperia	74HC245D	SOIC-20	Direct equivalent
onsemi	MC74HC245AN	DIP-20	Direct equivalent
TI	SN74LVC245AN	DIP-20	3.3V LVC version