LM2675MX-5.0

Product Overview The LM2675MX-5.0 from Texas Instruments is a 1A step-down voltage regulator in a SOIC-8 package providing a fixed 5.0V output from an input up to 40V. Based on a DMM (Die Mounted MOSFET) topology, it operates at 260 kHz switching frequency, requires minimal external components (inductor, diode, capacitors), and achieves up to 96% […]

TPS2557QDRBTQ1

Product Overview The TPS2557QDRBTQ1 from Texas Instruments is an AEC-Q100-qualified automotive-grade eFuse (smart power switch) with adjustable current limit from 0.5A to 5A in an 8-pin VSON (2.5 x 4 mm) package. It provides overcurrent protection, overtemperature shutdown, reverse-current blocking, and accurate current monitoring output for automotive and industrial applications operating from 2.5V to 6.5V. […]

LTC4370IDE#PBF

Product Overview The LTC4370IDE#PBF from Analog Devices is a dual ideal diode-OR controller with input supply monitoring in a 14-lead DFN (4×3 mm) package. It drives two external N-channel MOSFETs to create near-ideal diodes, reducing power dissipation compared to Schottky diodes while providing reverse-current protection and input supply monitoring for redundant power source ORing. Key […]

LTC4020IUHF

Product Overview The LTC4020IUHF from Analog Devices is a 55V buck-boost multi-chemistry battery charger with PowerPath instant-on operation in a 38-lead QFN (5×7 mm) package. It manages power distribution between input, battery, and system load with a synchronous buck-boost DC/DC controller, supporting Li-Ion CC/CV and lead-acid 3-stage charge algorithms over a wide 4.5V to 55V […]

BALF-NRG-02D3

Product Overview The BALF-NRG-02D3 from STMicroelectronics is an ultra-miniature balun with integrated matching network and harmonic filter, designed for conjugate matching to the ST BlueNRG BLE transceiver in a chip-scale package (CSP). Operating from 2.4 GHz to 2.5 GHz with 50-ohm balanced/unbalanced impedance, it provides low insertion loss, low amplitude and phase imbalance for optimized […]

BLUENRG-248

Product Overview The BLUENRG-248 from STMicroelectronics is a Bluetooth Low Energy (BLE) 5.0 wireless system-on-chip with 256 kB Flash and 24 kB RAM in a QFN-32 (5×5 mm) package. Based on an ARM Cortex-M0+ core, it provides a complete BLE radio and protocol stack with up to +8 dBm output power and -96 dBm receiver […]

LM35DT/NOPB

Product Overview The LM35DT/NOPB from Texas Instruments is a precision integrated-circuit temperature sensor with a linear 10 mV/°C output scale factor in a TO-220-3 through-hole package. It operates from 4V to 30V supply without external calibration, provides accuracy of ±0.5°C at 25°C, and measures temperature from -55°C to +150°C, making it ideal for direct temperature […]

AT45DB081E-SHN-B

Product Overview The AT45DB081E-SHN-B from Renesas (formerly Dialog/Atmel) is an 8-Mbit (1 MB) DataFlash serial Flash memory with two 256-byte SRAM buffers in an 8-lead SOIC package. It features a SPI-compatible serial interface, rapid page erase, and dual-buffer write architecture that enables continuous data streaming without wait states, making it ideal for data logging and […]

LM393P

Product Overview The LM393P from Texas Instruments is a dual differential comparator in a DIP-8 through-hole package, featuring an operating voltage range from 2V to 36V, open-collector outputs, and 1.3 µs typical response time. It is one of the most widely used general-purpose comparators in electronics, suitable for voltage comparison, zero-crossing detection, and oscillator circuits […]

MCP23008-E/SO

Product Overview The MCP23008-E/SO from Microchip is an 8-bit I2C I/O expander with three hardware address pins in an 18-lead SOIC package. Operating from 1.8V to 5.5V over the -40°C to +125°C extended temperature range, it provides 8 bidirectional I/O pins with configurable interrupts, polarity inversion, and 25 mA sink/source per pin. Key Specifications I/O […]