AEIC-7272-S16

Product Overview The AEIC-7272-S16 is a solid-state relay (SSR) or isolated switching module from Littelfuse (formerly part of the IXYS/Clare product line). The AEIC series provides galvanically isolated AC/DC switching with zero-crossing turn-on for low EMI. The S16 suffix indicates a 16-pin DIP package with specific voltage/current ratings. This device is designed for industrial control, […]

A1006UK/TA1NX

Product Overview The A1006UK/TA1NX is an N-channel MOSFET from Toshiba, designed for low-voltage switching applications. The A1006 designation indicates a small-signal MOSFET with low threshold voltage, suitable for load switching and logic-level driving. The UK package suffix refers to a compact SOT-323 (SC-70) surface-mount package, and the TA1NX suffix indicates specific grading and tape-on-reel packaging. […]

TPS63802DLAR

Product Overview The TPS63802DLAR is a 2A high-efficiency, low-Iq non-inverting buck-boost converter from Texas Instruments. It operates over a wide input voltage range of 1.3V to 5.5V and provides an adjustable output from 1.8V to 5.2V. The device uses a peak current mode control with a 4-switch H-bridge topology, seamlessly transitioning between buck, buck-boost, and […]

ME6211A33PG-N

Product Overview The ME6211A33PG-N is a low-dropout (LDO) linear voltage regulator from Microne (Mikron), providing a fixed 3.3V output at up to 300mA. It features a low quiescent current of 1.5uA (typical), ultra-low dropout voltage of 200mV at 150mA, and high output accuracy of +/-1%. The SOT-89-3 package provides a compact footprint with good thermal […]

CC1200RHBR

Product Overview The CC1200RHBR is a low-power, high-performance Sub-1 GHz RF transceiver from Texas Instruments, optimized for ISM/SRD frequency bands (164-190, 410-475, 820-950 MHz). It supports data rates up to 1.25 Mbps with excellent receiver sensitivity (-123 dBm at 1.2 kbps) and programmable output power up to +16 dBm. The device integrates hardware AES128 encryption, […]

ST25R3916-AQWT

Product Overview The ST25R3916-AQWT is a high-performance NFC universal device from STMicroelectronics, supporting NFC initiator, target, reader, and card emulation modes. Fully EMVCo 3.0 compliant, it integrates an advanced analog front end with high RF output power (>1.6W) for direct antenna driving. The -AQWT package is a 32-pin VFQFPN (5x5mm) with wettable flanks. It supports […]

R5F1007EANA#40

Product Overview The R5F1007EANA#40 is an RL78/G10 8/16-bit microcontroller from Renesas Electronics, featuring 8KB Flash, 512 bytes RAM, and an 8-pin DIP package. It operates at up to 32MHz with ultra-low power consumption (135uA at 1MHz, 2.5V). Despite its small 8-pin form factor, it integrates an 8-bit timer, comparator, and I2C/SPI communication interface, making it […]

PIC16F648A-I/SO

Product Overview The PIC16F648A-I/SO is an 8-bit microcontroller from Microchip Technology based on the PIC16 mid-range core, running at 20MHz with 4KB Flash program memory, 256 bytes SRAM, and 256 bytes EEPROM data memory. It features two analog comparators, a CCP module, and an enhanced USART with 9-bit address detection. Packaged in an 18-pin SOIC, […]

PIC32MX340F512H-80I/PT

Product Overview The PIC32MX340F512H-80I/PT is a 32-bit microcontroller from Microchip Technology based on the MIPS32 M4K core, running at 80MHz with 512KB Flash and 32KB SRAM. It features USB 2.0 OTG, multiple serial communication interfaces, and a 10-bit ADC. Packaged in a 64-pin LQFP (PT package), the -80I suffix indicates 80MHz industrial temperature range (-40C […]

STM32F415RGT6TR

Product Overview The STM32F415RGT6TR is a high-performance microcontroller from STMicroelectronics based on the ARM Cortex-M4 core with FPU, running at up to 168MHz. It features 1MB Flash, 192KB SRAM, and an integrated cryptographic acceleration engine (AES, DES, 3DES, HASH, HMAC). Packaged in a 64-pin LQFP, the -T6 suffix indicates tape-and-reel packaging. The device combines DSP […]

Online Inquiry Form

Support Excel, PDF, CSV format files for full BOM list quotation

Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.