Instant Quote

Home > Integrated Circuits ICs > Analog Linear ICs > TPA0211DGNR

TPA0211DGNR

2W mono Class-AB audio amp, BTL speaker + SE headphone, 2.5-5.5V, HVSSOP-8

3337

Effective Inventory
Go to Inquiry

Image for reference only

Manufacturer Part：

TPA0211DGNR

Package：

HVSSOP-8 (DGN) (3.0×4.9 mm, PowerPAD)

Brand：
Product Categories：
Quality Commitment
Shipping & Payment
Service & Packaging
Product Manual
Other recommendations you may be interested in.

STM32L072RBT6

TPS65217CRSLR

SN74HC273NSR

ADE7953ACPZ-RL

SN74HC138N

ATMEGA328-AU

AD826ARZ-REEL7

DP83848CVVX/NOPB

Description

Product Overview

The Texas Instruments TPA0211DGNR is a 2-W mono Class-AB audio power amplifier in a thermally-enhanced 8-pin HVSSOP (MSOP-PowerPAD) package. Capable of driving 2 W into a 4 Ω speaker from a 5 V supply, it supports both BTL (bridge-tied-load) speaker drive and single-ended headphone output. The device features a shutdown mode with 1 µA typical current and wide supply compatibility from 2.5 V to 5.5 V.

Key Specifications

Architecture Class-AB
Output Power 2 W @ 4 Ω (5 V), 0.6 W @ 4 Ω (3 V)
Headphone Output 92 mW @ 32 Ω
Supply Voltage 2.5 V ~ 5.5 V
Quiescent Current 4 mA typical
Shutdown Current 1 µA typical
SNR 93 dB
THD+N @ 1 kHz 0.2%
PSRR 58 dB
Bandwidth 20 kHz
Gain (BTL mode) -125 kΩ/RI
Package HVSSOP-8 (DGN) (3.0×4.9 mm, PowerPAD)
Operating Temperature -40°C ~ +85°C
Max Power Dissipation 2.14 W

Features

  • 2 W into 4 Ω from a 5 V supply in BTL mode
  • 0.6 W into 4 Ω from a 3 V supply
  • Wide supply voltage compatibility: 2.5 V to 5.5 V
  • Ultra-low shutdown current: 1 µA typical (TTL-compatible shutdown pin)
  • Thermally-enhanced MSOP-PowerPAD package for efficient heat dissipation
  • BTL speaker output and SE headphone output in a single device
  • De-pop circuitry for click-free startup and shutdown

Applications

  • Portable wireless communicators and smartphones
  • Notebook and laptop PC audio
  • PDAs and handheld devices
  • Portable audio players and multimedia devices
  • Small consumer electronics with speaker and headphone

The TPA0211DGNR from Texas Instruments is a 2-W mono bridge-tied-load (BTL) Class-AB audio power amplifier designed to drive speakers with as low as 4 Ω impedance. The device is ideal for small wireless communicators, notebook PCs, PDAs, and any application requiring both a mono speaker and stereo headphone output. From a 5 V supply, the TPA0211 delivers 2 W of power into a 4 Ω speaker with 93 dB SNR and 0.2% THD+N. The gain of the input stage is set by a user-selected input resistor and a 50 kΩ internal feedback resistor. The power stage is internally configured with a gain of -2.5 V/V in BTL mode, resulting in an overall gain of -125 kΩ/RI. The device operates over a wide supply range of 2.5 V to 5.5 V and features a TTL-compatible shutdown pin with 1 µA typical shutdown current.

The TPA0211DGNR operates as a two-stage amplifier consisting of an input stage and a power output stage. The input stage is an inverting amplifier where the gain is set by the ratio of an internal 50 kΩ feedback resistor to the external input resistor (RI). The power output stage is a Class-AB bridge-tied-load (BTL) amplifier with an internally fixed gain of -2.5 V/V. In BTL mode, the two output amplifiers drive opposite ends of the speaker in anti-phase, effectively doubling the voltage swing across the load compared to a single-ended output, thus quadrupling the power delivered to the speaker for a given supply voltage. The device also supports single-ended (SE) mode for headphone drive, where the power stage gain is -1.25 V/V. The built-in de-pop circuitry minimizes audible clicks and pops during power-up and power-down transients. The PowerPAD on the package underside provides a low-thermal-resistance path to the PCB for efficient heat dissipation.

Pin Name Type Function
1 SHUTDOWN Input Active-high shutdown control (TTL compatible)
2 BYPASS Analog Internal mid-supply bias voltage bypass capacitor
3 +IN Input Non-inverting audio input (high-impedance CMOS)
4 -IN Input Inverting audio input (connects to RI for gain setting)
5 VO1 Output Amplifier 1 output (speaker+ or headphone)
6 VDD Power Supply voltage (2.5-5.5V)
7 GND Power Ground
8 VO2 Output Amplifier 2 output (speaker- in BTL mode)
  • Portable audio: Smartphones and wireless communicators requiring both speaker and headphone drive
  • Notebook PCs: Built-in speaker amplification with 2W output and headphone switch-over
  • Portable instruments: Audio feedback and alert tone generation in handheld measurement devices
  • Consumer electronics: Smart speakers, portable radios, and multimedia players
  • Toy and gaming: Sound effects amplification in battery-powered toys and handheld games
Manufacturer Part Number Package Notes
TI TPA0211DGN HVSSOP-8 Tube packaging variant (same silicon)
TI TPA0232DGNR HVSSOP-8 Stereo 2W+2W version, similar architecture
TI LM4871MX SOIC-8 3W mono, larger package, no headphone
Maxim MAX4364ESA+ SO-8 1.4W mono, similar application range
NJRC NJM2760 SSOP-8 1.2W mono, BTL audio amplifier
TI TPA2005D1DGNR HVSSOP-8 Class-D, 1.7W mono, higher efficiency
Recommend Parts

TPS65217CRSLR

PMIC for AM335x, 3 bucks, 2 LDOs, battery charger, WLED, I2C, VQFN-48

Brand:

Package:

VQFN-48 (6×6 mm, 0.4 mm pitch)
In stock:
8909pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

SN74HC273NSR

Octal D-type flip-flop, edge-triggered, async clear, 28MHz, SOP-20

Brand:

Package:

SOP-20 (NS) (12.6×7.8 mm)
In stock:
8359pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

SN74HC138N

3-to-8 decoder/demux, active-low outputs, 3 enable inputs, 15ns, PDIP-16

Brand:

Package:

PDIP-16 (24.33×9.4 mm, Through-Hole)
In stock:
11952pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

DP83848CVVX/NOPB

10/100 Ethernet PHY, MII/RMII/SNI, Auto-MDIX, 270mW, LQFP-48, commercial

Brand:

Package:

LQFP-48 (7×7 mm)
In stock:
14754pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

SN74HC245PWR

Octal bus transceiver, 3-state outputs, 2-6V, 12ns tpd, TSSOP-20

Brand:

Package:

TSSOP-20 (6.5×6.4 mm)
In stock:
2638pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

LM324AMX/NOPB

Quad op amp, 3-32V single supply, 1MHz GBP, 700µA Iq, ground-sensing input, SOIC-14

Brand:

Package:

SOIC-14 (8.65 x 6 mm)
In stock:
4984pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
Quality Assurance

All electronic components we source from our partnered supply chains go through strict incoming inspections.Through careful testing, we ensure everything delivered to customers is genuine original parts and meets quality requirements.In addition, we keep complete inspection records to make the entire supply chain process clear and traceable.

Certification
We have obtained a number of professional certifications and built our own professional testing laboratory.This ensures that every product we deliver to our customers meets the highest quality requirements.We conduct tests in strict accordance with procedures to ensure stable product quality and accurate parameters.To guarantee genuine original parts, we also cooperate with reliable third-party testing institutions for strict quality inspection.We always attach great importance to quality and fully comply with industry standards, relevant regulations, and ISO 9001:2015 requirements.

Shipping & Payment

All electronic components we source from our partnered supply chains go through strict incoming inspections.Through careful testing, we ensure everything delivered to customers is genuine original parts and meets quality requirements.In addition, we keep complete inspection records to make the entire supply chain process clear and traceable.

Certification
We have obtained a number of professional certifications and built our own professional testing laboratory.This ensures that every product we deliver to our customers meets the highest quality requirements.We conduct tests in strict accordance with procedures to ensure stable product quality and accurate parameters.To guarantee genuine original parts, we also cooperate with reliable third-party testing institutions for strict quality inspection.We always attach great importance to quality and fully comply with industry standards, relevant regulations, and ISO 9001:2015 requirements.

Service & Packaging

All electronic components we source from our partnered supply chains go through strict incoming inspections.Through careful testing, we ensure everything delivered to customers is genuine original parts and meets quality requirements.In addition, we keep complete inspection records to make the entire supply chain process clear and traceable.

Certification
We have obtained a number of professional certifications and built our own professional testing laboratory.This ensures that every product we deliver to our customers meets the highest quality requirements.We conduct tests in strict accordance with procedures to ensure stable product quality and accurate parameters.To guarantee genuine original parts, we also cooperate with reliable third-party testing institutions for strict quality inspection.We always attach great importance to quality and fully comply with industry standards, relevant regulations, and ISO 9001:2015 requirements.

Company
insights
Industries
All Products
Integrated Circuits
C&I Devices
Discrete
Memory Chips
MPUs & MCUs