Inicio > Circuitos integrados IC > ADM7170ACPZ-5.0-R7

ADM7170ACPZ-5.0-R7

500mA CMOS LDO, 5.0V fixed, 5uVrms noise, 42mV dropout

10886

Inventario efectivo
Ir a la consulta

Image for reference only

Pieza del fabricante：

ADM7170ACPZ-5.0-R7

Paquete：

LFCSP-8 (3.0 x 3.0 x 0.73 mm, w/ EP)

Marca：
Categorías de productos：
Compromiso de calidad
Envíos y pagos
Servicio y embalaje
Manual del producto
Otras recomendaciones que pueden interesarle.

SII9396SCNUC-BAR

302S43W472KV4E

IXTT10N100D2

IS25LP016D-JNLE-TR

IS25WP256D-JLLE

IS62WV51216BLL-55BLI

IS42S16160J-7TLI

IS43TR16256BL-125KBLI

Descripción

ADM7170ACPZ-5.0-R7 Overview

The ADM7170ACPZ-5.0-R7 is a 500mA ultralow noise, high PSRR LDO regulator from Analog Devices with fixed 5.0V output, 94dB PSRR at 1kHz, only 3.8uV RMS output noise, in an LFCSP-8 package, suitable for RF and precision analog power supply.

Key Features

  • Fixed output voltage: 5.0V
  • Output current: 500mA
  • Dropout: 200mV at 500mA
  • PSRR: 94dB at 1kHz
  • Output noise: 3.8uV RMS
  • Supply voltage: 2.3V-6.5V

The ADM7170ACPZ-5.0-R7 is a 500 mA, ultralow noise CMOS LDO from Analog Devices with a fixed 5.0 V output and an input range of 2.3 V to 6.5 V. It delivers 5 uVrms output noise (100 Hz to 100 kHz), 60 dB PSRR at 100 kHz, and an ultra-fast 1.5 us transient response for load steps from 1 mA to 500 mA. The very low dropout of 42 mV at 500 mA enables efficient regulation from a 5.25 V input rail. Housed in a compact 3 mm x 3 mm LFCSP-8 with exposed pad, it requires only a 4.7 uF ceramic output capacitor.

The ADM7170ACPZ-5.0-R7 uses a PMOS pass transistor controlled by a high-bandwidth error amplifier. The amplifier compares the output sense voltage with an internal precision 5.0 V bandgap reference. Any deviation drives the PMOS gate to restore regulation within 1.5 us for large load transients. The CMOS architecture ensures ground current remains at 0.7 mA (no-load) independent of output current, unlike bipolar LDOs where ground current scales with load. The SENSE pin enables remote output voltage sensing at the load point. The SS pin allows programmable soft-start via an external capacitor to limit inrush current. The precision enable (EN) circuit has a 1.2 V threshold with 40 mV hysteresis, enabling deterministic power sequencing. Overcurrent protection and thermal shutdown safeguard the device under fault conditions.

Pin Nombre Descripción
1 VOUT Regulated 5.0 V output; connect 4.7 uF ceramic capacitor to GND
2 VOUT Regulated output (duplicate for current capacity)
3 SENTIDO Output voltage sense feedback; connect to load point for remote sensing
4 SS Soft-start control; connect capacitor to GND for programmable ramp time
5 ES Enable input; precision 1.2 V threshold for supply sequencing
6 GND Referencia del suelo
7 VIN Input supply (5.1 V to 6.5 V recommended)
8 VIN Input supply (duplicate)
EP GND Exposed thermal pad; solder to PCB ground plane
  • 5 V Analog Rail: Ultra-clean supply for precision op-amps, ADC reference buffers, and sensor signal chains
  • RF Front-End Power: Low-noise LNA, mixer, and PLL supply in wireless transceivers up to 6 GHz
  • USB-Powered Devices: Regulating 5 V USB bus to a clean 5 V rail with minimal dropout
  • Test Equipment: Low-noise supply for oscilloscope front-ends and spectrum analyzer LO stages
  • Medical Instrumentation: Battery-powered diagnostic equipment requiring low-noise analog supplies
Modelo Fabricante Vout Iout Noise Paquete
ADM7170ACPZ-3.3-R7 Dispositivos analógicos 3.3 V 500 mA 5 uVrms LFCSP-8
LT3042 Dispositivos analógicos Adj 200 mA 0.8 uVrms DFN-12
TPS7A4700 Texas Instruments Adj 1 A 3.8 uVrms VSON-10
ADM7150ACPZ-5.0-R7 Dispositivos analógicos 5.0 V 800 mA 1.0 uVrms LFCSP-8
NCP511 onsemi 5.0 V 300 mA 8 uVrms DFN-6

ADM7170ACPZ-5.0V-R7 is a 500mA ultralow noise CMOS LDO from Analog Devices with 5µVrms noise, 60dB PSRR at 100kHz, and 1.5µs fast transient response in 3x3mm LFCSP-8. The family includes 1.8V, 3.3V, and 5.0V fixed-output variants with identical performance. For higher current, ADM7150 provides 800mA with 1.0µVrms noise. For adjustable output, ADM7170ACPZ offers programmable voltage. The TPS7A7001 from TI is a competitive 1A low-noise LDO alternative.

Recomendar piezas

SII9396SCNUC-BAR

HDMI 2.0 Bridge, 4K@60Hz, HDCP 2.2 Repeater, MHL 3.0, 76-pin QFN EP

Marca:

Paquete:

76-Pin QFN EP (9.0 x 9.0 x 0.83 mm)
En stock:
6848pcs

Ciclo de carga: 3~7 días
El pedido mínimo es de 1

Ir a la consulta

302S43W472KV4E

4700pF 3000V X7R MLCC, 10%, 1812, high-voltage TANCERAM, -55 to 125C, tape and reel

Marca:

Paquete:

1812 (4.50 x 3.18 x 2.80 mm)
En stock:
4146pcs

Ciclo de carga: 3~7 días
El pedido mínimo es de 1

Ir a la consulta

IXTT10N100D2

N-Channel depletion-mode MOSFET, 1000V, 10A, 1.5Ohm, normally-on, TO-268AA, 695W

Marca:

Paquete:

TO-268AA / D3PAK (15.75 x 13.08 x 4.83 mm)
En stock:
14959pcs

Ciclo de carga: 3~7 días
El pedido mínimo es de 1

Ir a la consulta

IS25LP016D-JNLE-TR

16Mbit SPI NOR Flash, 3V, QSPI/QPI, 133MHz, DTR, SOIC-8 150mil, -40 to 105C, TR

Marca:

Paquete:

8-SOIC (4.90 x 3.90 x 1.75 mm, 150mil)
En stock:
11082pcs

Ciclo de carga: 3~7 días
El pedido mínimo es de 1

Ir a la consulta

IS25WP256D-JLLE

256Mbit SPI NOR Flash, 1.8V, QPI/QSPI, 104MHz, DTR, WSON-8 6x8mm, -40 to 105C

Marca:

Paquete:

8-WSON (6.0 x 8.0 x 0.73 mm, exposed pad)
En stock:
13368pcs

Ciclo de carga: 3~7 días
El pedido mínimo es de 1

Ir a la consulta

IS62WV51216BLL-55BLI

8Mbit async SRAM, 512Kx16, 2.5-3.6V, 55ns, ultra-low power, 48-mini BGA, Industrial

Marca:

Paquete:

48-Mini BGA (7.2 x 8.7 x 0.9 mm)
En stock:
3838pcs

Ciclo de carga: 3~7 días
El pedido mínimo es de 1

Ir a la consulta
Garantía de calidad

Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.

1. Authorized & Genuine Sourcing Promise

All of our electronic components are procured from official authorized distributors and original manufacturers. We strictly reject counterfeits, refurbished parts, disassembled components and gray-market goods. Every product is guaranteed to be brand-new original parts and fully consistent with the original technical parameters. For branded products such as NXP IC series, we maintain complete supply channel documents to realize full product traceability.

2. Strict Full-batch Quality Inspection

We implement 100% full-batch quality control for all goods before shipment. Our professional QC team conducts multi-dimensional tests including appearance inspection, electrical parameter testing, performance verification and packaging check. Each batch of components is attached with complete inspection reports and batch records. We stick to zero-tolerance standards for defective products to ensure every piece of component meets industrial application requirements.

3. Industry Standard Compliance

Our products comply with a variety of international industry quality standards to adapt to high-standard application scenarios:
  • Electrónica del automóvil: All automotive-grade components pass AEC-Q series certification, featuring excellent stability and durability to adapt to complex vehicle operating environments.
  • Productos sanitarios: High-reliability components meet medical industry safety and compliance regulations, ensuring stable operation for medical equipment.
  • Industrial Control & Consumer Electronics: Products conform to universal international electronic industry standards, suitable for long-term continuous operation of various equipment.

4. Professional Reliability Control

For static-sensitive, moisture-sensitive and precision components such as ICs, PCBs, sensors and connectors, we carry out reliability screening in advance. Combined with standardized ESD anti-static packaging and vacuum moisture-proof packaging, we avoid component damage caused by static electricity, dampness or collision during storage and transportation, and retain the original performance of products.

5. Traceability Management System

We establish a complete product traceability system. Each batch of goods corresponds to independent batch number, sourcing record, inspection record and delivery record. Customers can query the whole lifecycle information of components at any time. This system effectively solves quality risks and facilitates after-sales handling and production quality control for your company.

6. After-sales Quality Guarantee

If any product is confirmed to have non-conformity quality problems due to our reasons after receipt, we provide free return, exchange and supplementary delivery services. Our professional quality team will also conduct root cause analysis to optimize our quality control process. We respond to quality feedback within 24 hours to resolve your worries efficiently.

Póngase en contacto con nosotros

If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:

 

Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China

 

Envíos y pagos

Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.

1. Payment Terms

We offer a variety of secure and convenient payment methods to meet diverse business cooperation needs. Details are as follows:
  1. Accepted Payment Methods
  • T/T (Bank Wire Transfer): The primary settlement method for bulk orders and a widely used international payment channel.
  • PayPal: Ideal for small orders, sample orders and quick payments.

  1. Settlement Currency

     

    US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.

  2. Bank Charges

     

    All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.

  3. Payment Requirements
  • Sample and small orders: Shipment will be arranged upon full payment.
  • In-stock bulk orders: Goods will be delivered within 2 to 3 working days after full payment.

2. Shipping & Delivery

We partner with leading global logistics providers to ensure safe and fast delivery worldwide. Relevant details are listed below:
  1. Logistics Partners
  • International Express: DHL, FedEx, UPS, TNT
  • Economy Logistics: Air freight and sea freight for large-volume cargo
  • Domestic Delivery: SF Express, Yunda Express
  1. Order Processing Time
  • In-stock items: Orders confirmed and fully paid before 14:00 (GMT+8) will be shipped on the same day. All other orders will be dispatched within 1 to 2 working days.
  • Out-of-stock or sourced items: The delivery lead time will be confirmed separately according to brand and inventory status.
  1. Estimated Transit Time
  • International Express: 3 – 7 working days globally
  • Air Freight: 7 – 12 working days
  • Sea Freight: 25 – 40 working days for heavy and large bulk cargo
  1. Shipping Fee Rules
  • Shipping cost is calculated based on package weight, volume, destination and delivery method.
  • Both freight prepaid and freight collect are available. Please provide your courier account number in advance if you choose freight collect.
  • Free international express delivery is offered for large orders. Terms for long-term partners can be negotiated separately.
  1. Shipment Tracking
     

    Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.

3. General Order Rules & Notes

  1. MOQ & Sample Service

     

    We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.

  2. Packaging Standard

     

    All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.

4. Customs & Liability Statement

  1. Import Duties & Taxes

     

    All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.

  2. Handling of Lost or Damaged Goods
  • In case of loss or severe damage during transit, please contact us within 48 hours after receiving the tracking information. We will assist you in filing a claim with the logistics provider.
  • We shall not be liable for any losses caused by incorrect delivery address, wrong contact information or the buyer’s refusal to complete customs clearance.

5. Local Pickup in Shenzhen

Local pickup service is available for customers in Shenzhen and surrounding areas:
  • Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong Province, China
  • Business Hours: 09:00 – 18:00, Monday to Friday. Closed on weekends and official public holidays.
  • Notice: Please make an appointment via email or communication tools one day in advance, and present your order information upon pickup.

Contact Information

Email: info@materialparts.com

Tel / WhatsApp: +86 13760382860

Servicio y embalaje

Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.

Core Services

1. One-stop Sourcing & BOM Support

We specialize in a full range of passive and active electronic components, including SMD resistors, power resistors, connectors, aviation connectors, LED beads, flexible circuit boards, printed circuit boards, and integrated circuits. Our professional team provides BOM list consolidation, component matching, and alternative model recommendation services. We support sample orders, small-batch trial production, and mass production orders with flexible MOQs to meet diverse procurement needs.

2. Genuine Product Guarantee & Full-process Quality Inspection

All products are sourced from official authorized channels and are 100% original genuine parts. Every batch of goods undergoes strict full-process quality inspection before delivery, with complete batch records and traceability documents provided. Our products comply with AEC-Q standards for automotive electronics and high-reliability specifications for medical devices. We eliminate counterfeits, refurbished parts and defective products from the source to secure your project production.

3. Fast Quotation & Order Processing

Our customer service team responds promptly to inquiries and quotation requests. All in-stock orders will be processed within one working day. We provide stocking reservation services for long-term cooperative customers, effectively solving problems such as component shortages and unstable supply chains.

4. Professional Technical Support

Our senior engineer team provides free technical consultation, model selection guidance and original manufacturer datasheets. We assist customers in solving problems related to product R&D, circuit design and component application, providing reliable technical support for project progress.

5. Sourcing for Special Components

Relying on our global supply chain network, we professionally source scarce components, obsolete parts and customized special components to efficiently solve your procurement difficulties.

6. Global Logistics & Document Services

We cooperate with mainstream international logistics providers including DHL, FedEx, UPS and TNT to achieve fast global delivery. We can provide complete export documents such as customs declaration files, commercial invoices and packing lists to ensure smooth customs clearance for international shipments. Local pickup is also available for customers in Shenzhen, China.

Professional Packaging Standards

Electronic components are sensitive to static electricity, collision, moisture and dust. We adopt industry-standard anti-static packaging solutions to fully ensure the integrity of goods during transportation and storage.

1. General Packaging Specifications

  • All components are packed separately to avoid damage caused by friction and collision;
  • Shockproof buffer materials are added for fragile products to ensure transportation safety;
  • Each package is clearly marked with part number, quantity, batch number and specifications for easy inventory counting and management.

2. Classified Professional Packaging

  • Anti-static Packaging: Static-sensitive components such as chips, circuit boards and sensors are packaged with anti-static bags, shielding boxes and conductive foam in strict accordance with international anti-static standards to prevent static damage.
  • Vacuum Moisture-proof Packaging: Moisture-sensitive components are vacuum-sealed with desiccants to isolate humid air, suitable for ocean transportation and long-term storage.
  • Original Factory Packaging: Integrated circuits of brands such as NXP are delivered with original reels, trays or tubes by default, retaining complete original packaging and adapting to automated SMT production lines.
  • Discrete Device Packaging: Discrete devices such as SMD resistors, power resistors and LEDs are quantitatively and classifiedly packaged with accurate quantity and clear marking.
  • Connector / Aviation Connector Packaging: Hard outer packaging is adopted to prevent pin bending and structural deformation.

3. Custom Packaging Services

We provide value-added services including personalized packaging, custom labeling and re-reeling according to customer requirements, fully matching your production and warehouse management standards.

Contact Information

For service consultation or packaging customization, please feel free to contact us:
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
 

Online Inquiry Form

Support Excel, PDF, CSV format files for full BOM list quotation

Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.

Empresa
perspectivas
Industrias
Todos los productos
Circuitos integrados
Dispositivos C&I
Discreto
Chips de memoria
MPU y MCU