Image for reference only
AT24C02D-SSHM-T
TSSOP-8 (4.4x3.0mm)
The AT24C02D-SSHM-T from Microchip is a 2Kb I2C serial EEPROM with wide 1.7-5.5V operating range and 1 million write cycle endurance in a TSSOP-8 package for parameter storage.
| Package | TSSOP-8 (4.4×3.0mm) |
The AT24C02D-SSHM-T from Microchip is a 2Kb I2C serial EEPROM with wide 1.7-5.5V operating range and 1 million write cycle endurance in a TSSOP-8 package for parameter storage.
The AT24C02D-SSHM-T is a 2Kb (256 x 8-bit) I2C Serial EEPROM from Microchip in TSSOP-8, operating from 1.7-5.5V. The D-version features a Schmitt trigger on SCL/SDA inputs for improved noise immunity and supports 1MHz I2C (Fast-mode Plus) at 5V. The memory is organized as a single 256-byte block with 8-byte page write capability. I2C protocol: the master initiates communication with a START condition, followed by the device address byte (1010+A2+A1+A0+R/W). The A0-A2 pins set the lower 3 bits of the address, allowing up to 8 AT24C02D devices on the same I2C bus. For a write operation: after the address byte + ACK, the master sends the 8-bit memory address, then 1-8 data bytes. After the last byte, a STOP condition triggers the internal write cycle (5ms max). The page write buffer holds 8 bytes; if more than 8 bytes are sent, the address wraps within the page (address rollover). For a read operation: the master first writes the memory address (random read), then issues a re-START with R/W=1, and clocks out data bytes. The WP (Write Protect) pin, when HIGH, blocks all write operations to the entire memory array, protecting critical data like calibration constants. The endurance is 1,000,000 write cycles per byte with 100-year data retention. The -SSHM-T suffix specifies TSSOP-8, 1.7-5.5V, tape-and-reel. The AT24C02D is used for: storing MAC addresses, serial numbers, calibration data, and configuration parameters in embedded systems.
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | Input | Address input 0 (sets I2C slave address bit, connect to VCC or GND) |
| 2 | A1 | Input | Address input 1 (sets I2C slave address bit) |
| 3 | A2 | Input | Address input 2 (sets I2C slave address bit, allows 8 devices on bus) |
| 4 | GND | Power | Ground |
| 5 | SDA | I/O | I2C serial data (bidirectional, open-drain, requires external pull-up) |
| 6 | SCL | Input | I2C serial clock (open-drain, requires external pull-up) |
| 7 | WP | Input | Write protect (HIGH=protect entire array, LOW=normal read/write) |
| 8 | VCC | Power | Supply (1.7-5.5V) |
| Manufacturer | Part Number | Package | Notes |
|---|---|---|---|
| Microchip | AT24C02D-SSHM-T | TSSOP-8 | Same device, Microchip brand |
| Microchip | AT24C04D-SSHM-T | TSSOP-8 | 4Kb version, double density |
| STMicroelectronics | M24C02-WMN6P | TSSOP-8 | 2Kb EEPROM, ST brand |
| ON Semi | CAT24C02WI-GT3 | TSSOP-8 | 2Kb EEPROM, ON Semi brand |
| Rohm | BR24C02FVM-W | TSSOP-8 | 2Kb EEPROM, Rohm brand |
Brand:
Package:
Cargo cycle: 3~7 Days
The minimum order is 1
Brand:
Package:
Cargo cycle: 3~7 Days
The minimum order is 1
Brand:
Package:
Cargo cycle: 3~7 Days
The minimum order is 1
Brand:
Package:
Cargo cycle: 3~7 Days
The minimum order is 1
Brand:
Package:
Cargo cycle: 3~7 Days
The minimum order is 1
Brand:
Package:
Cargo cycle: 3~7 Days
The minimum order is 1
English English 
简体中文
Español
العربية
Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.
If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.
Settlement Currency
US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.
Bank Charges
All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.
Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.
MOQ & Sample Service
We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.
Packaging Standard
All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.
Import Duties & Taxes
All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.
Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.
