TPS62160DSGR


3V-17V, 1A synchronous buck converter, DCS-Control, 2.25MHz, WSON-8 (2x2mm), adjustable 0.9V-6V output

13555

المخزون الفعال

Image for reference only

جزء الشركة المصنعة : جزء الشركة المصنعة

TPS62160DSGR

الحزمة : الحزمة

WSON-8 (2x2mm)

العلامة التجارية : العلامة التجارية
توصيات أخرى قد تكون مهتماً بها.
الوصف

نظرة عامة على المنتج

The TPS62160DSGR from Texas Instruments is a 3V to 17V input, 1A synchronous step-down DC-DC converter featuring DCS-Control topology. With a typical switching frequency of 2.25MHz, it achieves high efficiency and fast transient response in a tiny 2x2mm WSON-8 package. The adjustable output voltage ranges from 0.9V to 6V, with a quiescent current of just 17μA in power save mode.

المواصفات الرئيسية

الطوبولوجيا Buck (Step-Down)
نطاق جهد الإدخال 3V ~ 17V
Output Voltage Range 0.9V ~ 6V (Adjustable)
تيار الإخراج 1A
تردد التحويل 2.25 MHz (typical)
تيار التهدئة 17 μA (typical)
وضع التحكم DCS-Control
Synchronous Rectifier Yes
Duty Cycle (max) 100%
درجة حرارة التشغيل -40°C ~ 125°C (TJ)
الحزمة WSON-8 (2x2mm)
حالة الجزء نشط

الميزات

  • DCS-Control topology for fast transient response and high output voltage accuracy
  • 2.25MHz switching frequency enables small external components
  • Seamless Power Save Mode transition for high light-load efficiency
  • 100% duty cycle mode for lowest dropout operation
  • Power Good output for supply sequencing
  • Thermal shutdown and short-circuit protection
  • Pin-to-pin compatible with TPS62170 and TPS62125

التطبيقات

  • Standard 12V power rail point-of-load conversion
  • Lithium-ion battery-powered POL supplies
  • LDO replacement in space-constrained designs
  • Embedded systems and digital cameras
  • Mobile PCs, tablets, and modems

The TPS62160DSGR is a high-efficiency, synchronous step-down DC-DC converter from Texas Instruments, optimized for high power density applications. Operating from a 3V to 17V input range, it delivers up to 1A of continuous output current with adjustable output voltage from 0.9V to 6V. The proprietary DCS-Control topology combines adaptive on-time control with a voltage feedback loop, enabling fast transient response, seamless PWM/PSM mode transition, and high output accuracy. The 2.25MHz switching frequency allows the use of small inductors and capacitors, minimizing solution footprint. In power save mode, the device draws only 17μA from VIN, making it ideal for battery-powered applications. The 100% duty cycle mode supports low dropout operation when the input voltage approaches the output voltage.

The TPS62160 uses TI’s DCS-Control (Direct Control with Seamless transition) topology, which combines adaptive on-time PWM control with a voltage-based error amplifier. In PWM mode at medium and heavy loads, the device operates at a fixed 2.25MHz switching frequency with continuous conduction. As the load current decreases, the converter seamlessly transitions into Power Save Mode (PSM), reducing the switching frequency to maintain high efficiency. The internal synchronous rectifier eliminates the need for an external Schottky diode. The FB pin senses the output voltage through a resistor divider; the internal error amplifier compares it to an 800mV reference and adjusts the on-time accordingly. The Power Good (PG) open-drain output indicates when the output voltage is within regulation, enabling power sequencing in multi-rail systems.

دبوس الاسم النوع الوصف
1 AGND GND Analog ground
2 VIN PWR Input supply voltage (3V-17V)
3 EN I Enable (active high, internal pull-down)
4 PG O Power Good output (open-drain)
5 FB I Feedback voltage input (regulates to 800mV)
6 VOS I Output voltage sense for control loop
7 PGND GND Power ground
8 SW O Switch node (connect to inductor)
  • 12V Rail POL: Efficient 12V to 3.3V/5V conversion for industrial and computing systems
  • Battery-Powered Devices: Li-ion to 1.8V/3.3V conversion with 17μA quiescent current
  • LDO Replacement: Higher efficiency alternative to linear regulators in thermally constrained designs
  • Embedded Systems: Compact POL supply for FPGAs, processors, and peripherals
  • Portable Electronics: Multi-cell battery to system rail conversion in cameras and modems
الطراز الشركة المصنعة الفرق الرئيسي
TPS62160DGKR تكساس إنسترومنتس VSSOP-8 package variant (3x3mm)
TPS62161DSGR تكساس إنسترومنتس Fixed 5V output version
TPS62170DSGR تكساس إنسترومنتس Lower current (0.5A), pin-compatible
TLV62569DBVR تكساس إنسترومنتس 2A output, SOT-23-5, lower input range
AP63200WU-7 شركة ديودز 2A, 3.8V-32V input, SOT-23-6
قطع الغيار الموصى بها
PMIC for AM335x, 3 bucks, 2 LDOs, battery charger, WLED, I2C, VQFN-48

العلامة التجارية:

الحزمة:

VQFN-48 (6×6 mm, 0.4 mm pitch)
متوفر في المخزون:
8909pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

Octal D-type flip-flop, edge-triggered, async clear, 28MHz, SOP-20

العلامة التجارية:

الحزمة:

SOP-20 (NS) (12.6×7.8 mm)
متوفر في المخزون:
8359pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

3-to-8 decoder/demux, active-low outputs, 3 enable inputs, 15ns, PDIP-16

العلامة التجارية:

الحزمة:

PDIP-16 (24.33×9.4 mm, Through-Hole)
متوفر في المخزون:
11952pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

2W mono Class-AB audio amp, BTL speaker + SE headphone, 2.5-5.5V, HVSSOP-8

العلامة التجارية:

الحزمة:

HVSSOP-8 (DGN) (3.0×4.9 mm, PowerPAD)
متوفر في المخزون:
3337pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

10/100 Ethernet PHY, MII/RMII/SNI, Auto-MDIX, 270mW, LQFP-48, commercial

العلامة التجارية:

الحزمة:

LQFP-48 (7×7 mm)
متوفر في المخزون:
14754pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

Octal bus transceiver, 3-state outputs, 2-6V, 12ns tpd, TSSOP-20

العلامة التجارية:

الحزمة:

TSSOP-20 (6.5×6.4 mm)
متوفر في المخزون:
2638pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

ضمان الجودة

تخضع جميع المكونات الإلكترونية التي نحصل عليها من سلاسل التوريد الشريكة لنا لعمليات فحص صارمة للواردات، ومن خلال الاختبارات الدقيقة، نضمن أن كل ما يتم تسليمه للعملاء هو قطع أصلية أصلية وتفي بمتطلبات الجودة، بالإضافة إلى ذلك، نحتفظ بسجلات فحص كاملة لجعل عملية سلسلة التوريد بأكملها واضحة ويمكن تتبعها.

التصديق
لقد حصلنا على عدد من الشهادات الاحترافية وقمنا ببناء مختبر الاختبار الاحترافي الخاص بنا، وهذا يضمن أن كل منتج نقدمه لعملائنا يلبي أعلى متطلبات الجودة، ونجري الاختبارات وفقًا لإجراءات صارمة لضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان قطع أصلية أصلية، نتعاون أيضًا مع مؤسسات اختبار موثوقة من طرف ثالث لفحص الجودة الصارم، ونولي دائمًا أهمية كبيرة للجودة ونلتزم تمامًا بمعايير الصناعة واللوائح ذات الصلة ومتطلبات ISO 9001: 2015.

الشحن والدفع

تخضع جميع المكونات الإلكترونية التي نحصل عليها من سلاسل التوريد الشريكة لنا لعمليات فحص صارمة للواردات، ومن خلال الاختبارات الدقيقة، نضمن أن كل ما يتم تسليمه للعملاء هو قطع أصلية أصلية وتفي بمتطلبات الجودة، بالإضافة إلى ذلك، نحتفظ بسجلات فحص كاملة لجعل عملية سلسلة التوريد بأكملها واضحة ويمكن تتبعها.

التصديق
لقد حصلنا على عدد من الشهادات الاحترافية وقمنا ببناء مختبر الاختبار الاحترافي الخاص بنا، وهذا يضمن أن كل منتج نقدمه لعملائنا يلبي أعلى متطلبات الجودة، ونجري الاختبارات وفقًا لإجراءات صارمة لضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان قطع أصلية أصلية، نتعاون أيضًا مع مؤسسات اختبار موثوقة من طرف ثالث لفحص الجودة الصارم، ونولي دائمًا أهمية كبيرة للجودة ونلتزم تمامًا بمعايير الصناعة واللوائح ذات الصلة ومتطلبات ISO 9001: 2015.

الخدمة والتغليف

تخضع جميع المكونات الإلكترونية التي نحصل عليها من سلاسل التوريد الشريكة لنا لعمليات فحص صارمة للواردات، ومن خلال الاختبارات الدقيقة، نضمن أن كل ما يتم تسليمه للعملاء هو قطع أصلية أصلية وتفي بمتطلبات الجودة، بالإضافة إلى ذلك، نحتفظ بسجلات فحص كاملة لجعل عملية سلسلة التوريد بأكملها واضحة ويمكن تتبعها.

التصديق
لقد حصلنا على عدد من الشهادات الاحترافية وقمنا ببناء مختبر الاختبار الاحترافي الخاص بنا، وهذا يضمن أن كل منتج نقدمه لعملائنا يلبي أعلى متطلبات الجودة، ونجري الاختبارات وفقًا لإجراءات صارمة لضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان قطع أصلية أصلية، نتعاون أيضًا مع مؤسسات اختبار موثوقة من طرف ثالث لفحص الجودة الصارم، ونولي دائمًا أهمية كبيرة للجودة ونلتزم تمامًا بمعايير الصناعة واللوائح ذات الصلة ومتطلبات ISO 9001: 2015.