الصفحة الرئيسية > الدوائر المتكاملة الدوائر المتكاملة > TLV6710DDCR

TLV6710DDCR

36V window comparator, 400mV ref, 7uA, open-drain, SOT-23-6, 0.25% accuracy

11268

المخزون الفعال

انتقل إلى الاستفسار

Image for reference only

جزء الشركة المصنعة ： جزء الشركة المصنعة

TLV6710DDCR

الحزمة ： الحزمة

SOT-23-THN-6 (2.90 x 1.60 x 0.95 mm)

العلامة التجارية ： العلامة التجارية

فئات المنتجات:：فئات المنتجات

الدوائر المتكاملة الدوائر المتكاملة

توصيات أخرى قد تكون مهتماً بها.

SII9396SCNUC-BAR

IS43TR16256BL-125KBLI

الوصف

نظرة عامة على المنتج

The TLV6710DDCR from Texas Instruments is a micropower 36V window comparator with an integrated 400mV reference in a SOT-23-6 package. It provides two high-accuracy comparators with open-drain outputs for overvoltage and undervoltage monitoring.

المواصفات الرئيسية

جهد الإمداد	1.8 V to 36 V
Reference Voltage	400 mV (+/-0.25% typical)
تيار التهدئة	7 uA (typical)
نوع الإخراج	Open-drain (25V rating)
Hysteresis	5.5 mV (internal, typical)
درجة حرارة التشغيل	-40C to +125C

الميزات

1.8V to 36V wide supply range for direct high-voltage monitoring
Internal 400mV reference with 0.25% typical accuracy
7uA micropower consumption for always-on battery monitoring
Window comparator or dual independent comparator operation
5.5mV internal hysteresis for noise immunity
Open-drain outputs rated to 25V for flexible voltage interfacing

التطبيقات

Battery overvoltage and undervoltage protection
Power supply window monitoring in industrial systems
Relay and circuit breaker control
Door/window sensor and portable medical equipment

مقدمة المنتج:TLV6710DDCR مقدمة المنتج

The TLV6710DDCR from Texas Instruments is a micropower, high-voltage window comparator with an integrated 400mV reference in a SOT-23-6 thin package. The device operates from a 1.8V to 36V supply range, making it suitable for direct monitoring of battery stacks and power rails without additional voltage dividers on the supply pin. Two high-accuracy comparators with an internal 400mV reference and 0.25% typical threshold accuracy provide precise voltage monitoring. The device can be configured as a window comparator (monitoring both overvoltage and undervoltage conditions simultaneously) or as two independent comparators. OUTA is driven low when the voltage at INA+ drops below the threshold, functioning as an undervoltage detector. OUTB is driven low when the voltage at INB- rises above the threshold, functioning as an overvoltage detector. Both comparators include 5.5mV internal hysteresis for noise immunity, preventing output chattering on slowly moving input signals. The open-drain outputs are rated to 25V, allowing interface with logic supplies at different voltage levels. The 7uA typical quiescent current enables always-on monitoring in battery-powered applications.

مبدأ العمل:TLV6710DDCR مبدأ العمل

The TLV6710DDCR integrates two comparators with a common 400mV reference for window voltage monitoring. (1) Comparator A (Undervoltage): The inverting input of Comparator A is internally connected to the 400mV reference. When the voltage at INA+ (non-inverting) drops below 400mV minus hysteresis (394.5mV), OUTA goes low. When INA+ rises above 400mV, OUTA goes high-impedance (open-drain). This detects undervoltage conditions. (2) Comparator B (Overvoltage): The non-inverting input of Comparator B is internally connected to the 400mV reference. When the voltage at INB- (inverting) rises above 400mV plus hysteresis, OUTB goes low. When INB- drops below 400mV minus hysteresis, OUTB goes high-impedance. This detects overvoltage conditions. (3) Window Mode: By connecting both INA+ and INB- to the same monitored voltage through external resistor dividers, the device simultaneously detects both undervoltage (OUTA) and overvoltage (OUTB) conditions, creating a window comparator. (4) Threshold Setting: External resistor dividers scale the monitored voltage down to the 400mV threshold. The 0.25% reference accuracy ensures precise trip points. The 5.5mV hysteresis provides noise margin.

وصف الدبوس:TLV6710DDCR تعريف الدبوس ووظائفه

دبوس	الاسم	النوع	الوظيفة
1	OUTA	المخرجات	Comparator A output (open-drain, undervoltage)
2	GND	أرضي	أرضي
3	INA+	المدخلات	Comparator A non-inverting input
4	INB-	المدخلات	Comparator B inverting input
5	VDD	الطاقة	Supply (1.8V to 36V)
6	OUTB	المخرجات	Comparator B output (open-drain, overvoltage)

Application Scenarios:In which products and applications isTLV6710DDCR مستعمل

Battery overvoltage and undervoltage protection with 400mV reference
Power supply window monitoring in industrial systems at 36V
Relay and circuit breaker control with open-drain 25V outputs
Door/window sensor and portable medical equipment at 7uA quiescent current

Alternative Models:What chips are recommended as replacements for TLV6710DDCR

الشركة المصنعة	رقم الجزء	الحزمة	الملاحظات
TI	TLV6711DDCR	SOT-23-6	Single comparator version
TI	LMV7239M5X/NOPB	SOT-23-5	Single comparator, 2.5-5.5V
الرقاقة الدقيقة	MIC833NYC5-T5	SOT-23-5	Window comparator, 2.5-16V
مكسيم	MAX9029AUT+T	SOT-23-6	Dual comparator, nanopower