STM32F407VET6


Cortex-M4F MCU, 168MHz, 512KB Flash, 192KB SRAM, Ethernet, USB OTG, LQFP-100

2870

المخزون الفعال

Image for reference only

جزء الشركة المصنعة : جزء الشركة المصنعة

STM32F407VET6

الحزمة : الحزمة

LQFP-100 (14×14×1.4 mm)

العلامة التجارية : العلامة التجارية
توصيات أخرى قد تكون مهتماً بها.
الوصف

نظرة عامة على المنتج

The STMicroelectronics STM32F407VET6 is a high-performance ARM Cortex-M4F microcontroller operating at up to 168 MHz with single-precision floating-point unit (FPU) and DSP instructions. It integrates 512 KB Flash, 192 KB SRAM (including 64 KB CCM), and an extensive peripheral set including Ethernet MAC, USB OTG HS/FS, CAN, FSMC, and a camera interface. Packaged in LQFP-100, it is a versatile workhorse for industrial and consumer applications.

المواصفات الرئيسية

الأساسيات ARM Cortex-M4F with FPU and DSP
Max Frequency 168 MHz
Flash Memory 512 كيلوبايت
SRAM 192 KB (112+16+64 CCM) + 4 KB backup
الحزمة LQFP-100 (14×14 mm)
I/O Pins 82
ADC 3× 12-bit, 2.4 MSPS, up to 24 channels
DAC 2× 12-bit
المؤقتات Up to 17 (12× 16-bit, 2× 32-bit)
التواصل 3× I2C, 4× USART/2× UART, 3× SPI, 2× CAN, SDIO
Connectivity Ethernet MAC (IEEE 1588), USB 2.0 HS/FS OTG, Camera IF
جهد الإمداد 1.8 V ~ 3.6 V
درجة حرارة التشغيل -40°C ~ 85°C

الميزات

  • Cortex-M4F core with hardware FPU for single-precision IEEE 754 floating-point operations
  • ART Accelerator for 0-wait-state Flash execution at 168 MHz (210 DMIPS)
  • 192 KB multi-bank SRAM with 64 KB Core-Coupled Memory (CCM) for zero-wait CPU access
  • 10/100 Ethernet MAC with IEEE 1588v2 hardware timestamping
  • USB 2.0 full-speed and high-speed OTG with on-chip PHY
  • FSMC for external memory and LCD interface support
  • 16-stream DMA with FIFO and burst support
  • True Random Number Generator (RNG) and CRC unit

التطبيقات

  • Industrial control and PLC systems
  • Motor drive and power inverters
  • Medical and healthcare equipment
  • Consumer electronics with connectivity
  • Embedded networking and gateways

The STM32F407VET6 from STMicroelectronics is a mainstream high-performance microcontroller based on the ARM Cortex-M4F 32-bit RISC core, capable of operating at frequencies up to 168 MHz. The Cortex-M4F core features a single-precision floating-point unit (FPU) supporting all IEEE 754 single-precision data-processing instructions and data types, along with a full set of DSP instructions and a Memory Protection Unit (MPU). The device incorporates 512 KB of Flash memory, 192 KB of SRAM organized as 112 KB SRAM1 + 16 KB SRAM2 + 64 KB CCM (Core-Coupled Memory) data RAM, and 4 KB of backup SRAM. The rich peripheral suite includes three 12-bit ADCs, two 12-bit DACs, up to 17 timers, multiple communication interfaces (I2C, SPI, USART, UART, CAN, SDIO), a 10/100 Ethernet MAC, dual USB OTG controllers, and an 8- to 14-bit camera interface.

The STM32F407VET6 is built around the ARM Cortex-M4F processor core with an Adaptive Real-Time (ART) Accelerator that allows 0-wait-state execution from Flash memory at the full 168 MHz clock rate. The ART Accelerator uses an instruction cache, a branch cache, and a literal pool cache to eliminate the wait states typically required when running from Flash at high frequencies. The memory subsystem features a multi-AHB bus matrix connecting the CPU, DMA controllers, and peripherals through three AHB buses and two APB buses, enabling concurrent access to different memory and peripheral regions. The 64 KB CCM RAM is directly coupled to the CPU via the I-bus and D-bus, providing zero-wait-state access for time-critical code and data, but cannot be accessed by DMA. The Ethernet MAC includes a dedicated DMA controller and supports IEEE 1588v2 precision time protocol for synchronized networked applications.

دبوس الاسم النوع الوظيفة
1-25 PE2-PE6, VBAT, PC13-PC15, etc. Power/I/O Port E, backup domain, oscillator pins
19 VSS الطاقة أرضي
20 VDD الطاقة 3.3V supply
31-50 PA0-PA15, PB0-PB3 الإدخال/الإخراج Port A (ADC, TIM, USART, SPI, USB), Port B
51 NRST المدخلات Reset pin (active low)
55-58 BOOT0, BOOT1 المدخلات Boot configuration pins
69-82 PC0-PC13, PD0-PD2 الإدخال/الإخراج Port C (ADC, FSMC), Port D (FSMC)
72 VBAT الطاقة Battery backup supply for RTC
91-100 PD3-PD15, PE7-PE15 الإدخال/الإخراج Port D/E (FSMC, TIM, UART)
  • Industrial control: PLC logic controllers, multi-axis motor drives using PWM timers and encoder inputs
  • Networked embedded systems: Ethernet-enabled data acquisition and protocol gateways with IEEE 1588 synchronization
  • Medical devices: Portable diagnostic instruments leveraging DSP instructions for signal processing
  • Consumer electronics: Smart home hubs and IoT gateways combining USB, CAN, and Ethernet connectivity
  • Robotics: Real-time control loops using FPU for kinematics calculations and sensor fusion
الشركة المصنعة رقم الجزء الحزمة الملاحظات
STMicroelectronics STM32F407ZGT6 LQFP-144 1MB Flash, more I/O, pin-compatible family
STMicroelectronics STM32F417VET6 LQFP-100 Same with hardware crypto (AES, DES, HASH)
جيجا ديفايس GD32F407VET6 LQFP-100 Pin-compatible, 168MHz Cortex-M4
STMicroelectronics STM32F405VET6 LQFP-100 No Ethernet MAC, otherwise identical
STMicroelectronics STM32F427VIT6 LQFP-100 180MHz, more RAM (256KB), Chrom-ART accelerator
NXP LPC4357FET256 LQFP-100 Dual-core M4/M0, 204MHz
قطع الغيار الموصى بها
Cortex-M0+ ultra-low-power MCU, 32MHz, 128KB Flash, crystal-less USB, LQFP-64

العلامة التجارية:

الحزمة:

LQFP-64 (10×10 mm)
متوفر في المخزون:
14446pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

ARM Cortex-M4F MCU, 72MHz, 384KB Flash, 64KB SRAM, dual ADC, 4 comparators, 2 op amps, LQFP-100

العلامة التجارية:

الحزمة:

LQFP-100 (14 x 14 x 1.4 mm)
متوفر في المخزون:
12274pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

ARM Cortex-M4F MCU, 168MHz, 1MB Flash, 192KB SRAM, Ethernet, USB OTG HS, UFBGA-176

العلامة التجارية:

الحزمة:

UFBGA-176 (10 x 10 mm, 0.65mm pitch)
متوفر في المخزون:
9303pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

Quad JFET-input op amp, 4MHz GBP, 16V/µs slew rate, 200pA bias current, SOIC-14

العلامة التجارية:

الحزمة:

SOIC-14 (8.75 x 4 x 1.65 mm)
متوفر في المخزون:
9834pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

Ultra-low-power Cortex-M3 MCU, 32MHz, 256KB Flash, 32KB SRAM, LCD controller, LQFP-64

العلامة التجارية:

الحزمة:

LQFP-64 (10x10mm)
متوفر في المخزون:
5417pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

Dual full-bridge motor driver, 46V, 4A total, TTL logic, Multiwatt-15, DC/stepper motors

العلامة التجارية:

الحزمة:

Multiwatt-15 Vertical (through-hole, 20.2 x 5.0 mm)
متوفر في المخزون:
10224pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

ضمان الجودة

تخضع جميع المكونات الإلكترونية التي نحصل عليها من سلاسل التوريد الشريكة لنا لعمليات فحص صارمة للواردات، ومن خلال الاختبارات الدقيقة، نضمن أن كل ما يتم تسليمه للعملاء هو قطع أصلية أصلية وتفي بمتطلبات الجودة، بالإضافة إلى ذلك، نحتفظ بسجلات فحص كاملة لجعل عملية سلسلة التوريد بأكملها واضحة ويمكن تتبعها.

التصديق
لقد حصلنا على عدد من الشهادات الاحترافية وقمنا ببناء مختبر الاختبار الاحترافي الخاص بنا، وهذا يضمن أن كل منتج نقدمه لعملائنا يلبي أعلى متطلبات الجودة، ونجري الاختبارات وفقًا لإجراءات صارمة لضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان قطع أصلية أصلية، نتعاون أيضًا مع مؤسسات اختبار موثوقة من طرف ثالث لفحص الجودة الصارم، ونولي دائمًا أهمية كبيرة للجودة ونلتزم تمامًا بمعايير الصناعة واللوائح ذات الصلة ومتطلبات ISO 9001: 2015.

الشحن والدفع

تخضع جميع المكونات الإلكترونية التي نحصل عليها من سلاسل التوريد الشريكة لنا لعمليات فحص صارمة للواردات، ومن خلال الاختبارات الدقيقة، نضمن أن كل ما يتم تسليمه للعملاء هو قطع أصلية أصلية وتفي بمتطلبات الجودة، بالإضافة إلى ذلك، نحتفظ بسجلات فحص كاملة لجعل عملية سلسلة التوريد بأكملها واضحة ويمكن تتبعها.

التصديق
لقد حصلنا على عدد من الشهادات الاحترافية وقمنا ببناء مختبر الاختبار الاحترافي الخاص بنا، وهذا يضمن أن كل منتج نقدمه لعملائنا يلبي أعلى متطلبات الجودة، ونجري الاختبارات وفقًا لإجراءات صارمة لضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان قطع أصلية أصلية، نتعاون أيضًا مع مؤسسات اختبار موثوقة من طرف ثالث لفحص الجودة الصارم، ونولي دائمًا أهمية كبيرة للجودة ونلتزم تمامًا بمعايير الصناعة واللوائح ذات الصلة ومتطلبات ISO 9001: 2015.

الخدمة والتغليف

تخضع جميع المكونات الإلكترونية التي نحصل عليها من سلاسل التوريد الشريكة لنا لعمليات فحص صارمة للواردات، ومن خلال الاختبارات الدقيقة، نضمن أن كل ما يتم تسليمه للعملاء هو قطع أصلية أصلية وتفي بمتطلبات الجودة، بالإضافة إلى ذلك، نحتفظ بسجلات فحص كاملة لجعل عملية سلسلة التوريد بأكملها واضحة ويمكن تتبعها.

التصديق
لقد حصلنا على عدد من الشهادات الاحترافية وقمنا ببناء مختبر الاختبار الاحترافي الخاص بنا، وهذا يضمن أن كل منتج نقدمه لعملائنا يلبي أعلى متطلبات الجودة، ونجري الاختبارات وفقًا لإجراءات صارمة لضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان قطع أصلية أصلية، نتعاون أيضًا مع مؤسسات اختبار موثوقة من طرف ثالث لفحص الجودة الصارم، ونولي دائمًا أهمية كبيرة للجودة ونلتزم تمامًا بمعايير الصناعة واللوائح ذات الصلة ومتطلبات ISO 9001: 2015.