الصفحة الرئيسية > الدوائر المتكاملة لإدارة الطاقة (PMIC) > محولات التيار المستمر-التناوب المستمر > RTQ2943GSP-QA

RTQ2943GSP-QA

42V 3.5A buck converter, 0.8-42V out, 100kHz-2.5MHz, AEC-Q100, 8-SOP-EP

4589

المخزون الفعال
انتقل إلى الاستفسار

Image for reference only

جزء الشركة المصنعة ： جزء الشركة المصنعة

RTQ2943GSP-QA

الحزمة ： الحزمة

8-SOP-EP (3.90 x 4.90 mm)

العلامة التجارية ： العلامة التجارية
فئات المنتجات:：فئات المنتجات
الالتزام بالجودة
الشحن والدفع
الخدمة والتغليف
دليل المنتج
توصيات أخرى قد تكون مهتماً بها.

SII9396SCNUC-BAR

302S43W472KV4E

IXTT10N100D2

IS25LP016D-JNLE-TR

IS25WP256D-JLLE

IS62WV51216BLL-55BLI

IS42S16160J-7TLI

IS43TR16256BL-125KBLI

الوصف

نظرة عامة على المنتج

The RTQ2943GSP-QA from Richtek Technology is a 42V, 3.5A step-down DC-DC buck converter with AEC-Q100 automotive qualification. It operates from a 4V to 42V input range and provides an adjustable output voltage from 0.8V to 42V at up to 3.5A continuous output current. The switching frequency is programmable from 100kHz to 2.5MHz via an external resistor, allowing optimization of efficiency versus component size.

المواصفات الرئيسية

الطوبولوجيا Step-Down (Buck)
جهد الإدخال 4V ~ 42V
جهد الخرج 0.8V ~ 42V (adjustable)
تيار الإخراج 3.5 A
Reference Voltage 0.8 V (typ)
تردد التحويل 100kHz ~ 2.5MHz (programmable)
Min On-Time 100 نانو ثانية (نموذجي)
HS Switch RDS(on) 150 mOhm (typ)
Spread Spectrum +6% (EMI reduction)
الحزمة 8-SOP-EP (3.90 x 4.90 mm)
درجة حرارة التشغيل -40C to +150C (TJ)
المؤهلات AEC-Q100 (-QA suffix)

الميزات

  • Wide 4V to 42V input range for automotive 12V/24V bus systems
  • مؤهل AEC-Q100 لتطبيقات السيارات
  • Programmable switching frequency up to 2.5MHz for compact designs
  • Spread-spectrum modulation reduces peak EMI emissions
  • Power Good output with programmable threshold
  • Internal soft-start with adjustable timing
  • Cycle-by-cycle current limit and thermal shutdown protection
  • 100ns minimum on-time supports high-frequency operation

التطبيقات

  • Automotive infotainment and ADAS power supply
  • Industrial distributed power bus conversion
  • Battery-powered equipment power management
  • Telecom 48V to logic rail conversion

The Richtek RTQ2943GSP-QA is a 42V, 3.5A step-down DC-DC buck converter with AEC-Q100 automotive qualification. It operates from a wide 4V to 42V input range, making it suitable for automotive 12V and 24V bus systems, as well as industrial distributed power architectures. The adjustable output voltage from 0.8V to 42V with 3.5A output current provides flexibility for powering various loads from logic rails to sensor supplies. The programmable switching frequency from 100kHz to 2.5MHz via a single external resistor on the RT/SYNC pin allows designers to optimize efficiency at lower frequencies or minimize inductor size at higher frequencies. Spread-spectrum modulation adds 6% dithering above the switching frequency to reduce peak EMI emissions, simplifying automotive EMC compliance. The -QA suffix confirms AEC-Q100 Grade 1 qualification for under-hood automotive applications.

The RTQ2943 uses a current-mode control architecture with an internal high-side N-Channel MOSFET. During the on-time, the HS switch connects the input voltage to the output inductor, causing inductor current to ramp up linearly. When the peak current reaches the error amplifier-controlled threshold, the HS switch turns off and the freewheeling (low-side) switch turns on, allowing inductor current to ramp down. The current-mode loop provides inherent cycle-by-cycle current limiting and fast transient response. The RT/SYNC pin programs the switching frequency through an external resistor to ground; alternatively, an external clock signal can synchronize the switching frequency. The FB pin receives the feedback voltage (0.8V reference) from the output voltage divider, and the error amplifier adjusts the peak current setpoint to regulate the output. Spread-spectrum modulation varies the switching frequency by +-6% to spread EMI energy across a wider bandwidth.

دبوس الاسم النوع الوظيفة
1 RT/SYNC المدخلات Frequency setting resistor / external clock sync
2 EN المدخلات Enable (active high)
3 PGOOD المخرجات Power good open-drain output
4 FB المدخلات Feedback voltage input (0.8V reference)
5 SS/TR المدخلات Soft-start / tracking capacitor
6 COMP الإدخال/الإخراج Error amplifier output (compensation)
7 GND الطاقة Ground and thermal pad
8 VIN الطاقة Input supply (4-42V)
  • Automotive infotainment and ADAS 12V/24V to 5V/3.3V power supply
  • Industrial distributed power bus 24V/48V step-down conversion
  • Battery-powered equipment power management from multi-cell packs
  • Telecom 48V system intermediate bus to logic rail conversion
الشركة المصنعة رقم الجزء الحزمة الملاحظات
شركة ديودز AP64350QSP-13 SOP-8-EP 42V 3.5A automotive buck, similar
TI LM5164DDAR SOP-8-EP 65V 500mA buck, higher voltage
MPS MP8759GD-Z QFN-12 22V 2A sync buck, lower voltage
Richtek RTQ2942GSP-QA 8-SOP-EP Same family, 4.5A variant
قطع الغيار الموصى بها

SII9396SCNUC-BAR

HDMI 2.0 Bridge, 4K@60Hz, HDCP 2.2 Repeater, MHL 3.0, 76-pin QFN EP

العلامة التجارية:

الحزمة:

76-Pin QFN EP (9.0 x 9.0 x 0.83 mm)
متوفر في المخزون:
6848pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

302S43W472KV4E

4700pF 3000V X7R MLCC, 10%, 1812, high-voltage TANCERAM, -55 to 125C, tape and reel

العلامة التجارية:

الحزمة:

1812 (4.50 x 3.18 x 2.80 mm)
متوفر في المخزون:
4146pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

IXTT10N100D2

N-Channel depletion-mode MOSFET, 1000V, 10A, 1.5Ohm, normally-on, TO-268AA, 695W

العلامة التجارية:

الحزمة:

TO-268AA / D3PAK (15.75 x 13.08 x 4.83 mm)
متوفر في المخزون:
14959pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

IS25LP016D-JNLE-TR

16Mbit SPI NOR Flash, 3V, QSPI/QPI, 133MHz, DTR, SOIC-8 150mil, -40 to 105C, TR

العلامة التجارية:

الحزمة:

8-SOIC (4.90 x 3.90 x 1.75 mm, 150mil)
متوفر في المخزون:
11082pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

IS25WP256D-JLLE

256Mbit SPI NOR Flash, 1.8V, QPI/QSPI, 104MHz, DTR, WSON-8 6x8mm, -40 to 105C

العلامة التجارية:

الحزمة:

8-WSON (6.0 x 8.0 x 0.73 mm, exposed pad)
متوفر في المخزون:
13368pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

IS62WV51216BLL-55BLI

8Mbit async SRAM, 512Kx16, 2.5-3.6V, 55ns, ultra-low power, 48-mini BGA, Industrial

العلامة التجارية:

الحزمة:

48-Mini BGA (7.2 x 8.7 x 0.9 mm)
متوفر في المخزون:
3838pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار
ضمان الجودة

Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.

1. Authorized & Genuine Sourcing Promise

All of our electronic components are procured from official authorized distributors and original manufacturers. We strictly reject counterfeits, refurbished parts, disassembled components and gray-market goods. Every product is guaranteed to be brand-new original parts and fully consistent with the original technical parameters. For branded products such as NXP IC series, we maintain complete supply channel documents to realize full product traceability.

2. Strict Full-batch Quality Inspection

We implement 100% full-batch quality control for all goods before shipment. Our professional QC team conducts multi-dimensional tests including appearance inspection, electrical parameter testing, performance verification and packaging check. Each batch of components is attached with complete inspection reports and batch records. We stick to zero-tolerance standards for defective products to ensure every piece of component meets industrial application requirements.

3. Industry Standard Compliance

Our products comply with a variety of international industry quality standards to adapt to high-standard application scenarios:
  • إلكترونيات السيارات: All automotive-grade components pass AEC-Q series certification, featuring excellent stability and durability to adapt to complex vehicle operating environments.
  • الأجهزة الطبية: High-reliability components meet medical industry safety and compliance regulations, ensuring stable operation for medical equipment.
  • Industrial Control & Consumer Electronics: Products conform to universal international electronic industry standards, suitable for long-term continuous operation of various equipment.

4. Professional Reliability Control

For static-sensitive, moisture-sensitive and precision components such as ICs, PCBs, sensors and connectors, we carry out reliability screening in advance. Combined with standardized ESD anti-static packaging and vacuum moisture-proof packaging, we avoid component damage caused by static electricity, dampness or collision during storage and transportation, and retain the original performance of products.

5. Traceability Management System

We establish a complete product traceability system. Each batch of goods corresponds to independent batch number, sourcing record, inspection record and delivery record. Customers can query the whole lifecycle information of components at any time. This system effectively solves quality risks and facilitates after-sales handling and production quality control for your company.

6. After-sales Quality Guarantee

If any product is confirmed to have non-conformity quality problems due to our reasons after receipt, we provide free return, exchange and supplementary delivery services. Our professional quality team will also conduct root cause analysis to optimize our quality control process. We respond to quality feedback within 24 hours to resolve your worries efficiently.

اتصل بنا

If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:

 

Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China

 

الشحن والدفع

Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.

1. Payment Terms

We offer a variety of secure and convenient payment methods to meet diverse business cooperation needs. Details are as follows:
  1. Accepted Payment Methods
  • T/T (Bank Wire Transfer): The primary settlement method for bulk orders and a widely used international payment channel.
  • PayPal: Ideal for small orders, sample orders and quick payments.

  1. Settlement Currency

     

    US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.

  2. Bank Charges

     

    All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.

  3. Payment Requirements
  • Sample and small orders: Shipment will be arranged upon full payment.
  • In-stock bulk orders: Goods will be delivered within 2 to 3 working days after full payment.

2. Shipping & Delivery

We partner with leading global logistics providers to ensure safe and fast delivery worldwide. Relevant details are listed below:
  1. Logistics Partners
  • International Express: DHL, FedEx, UPS, TNT
  • Economy Logistics: Air freight and sea freight for large-volume cargo
  • Domestic Delivery: SF Express, Yunda Express
  1. Order Processing Time
  • In-stock items: Orders confirmed and fully paid before 14:00 (GMT+8) will be shipped on the same day. All other orders will be dispatched within 1 to 2 working days.
  • Out-of-stock or sourced items: The delivery lead time will be confirmed separately according to brand and inventory status.
  1. Estimated Transit Time
  • International Express: 3 – 7 working days globally
  • Air Freight: 7 – 12 working days
  • Sea Freight: 25 – 40 working days for heavy and large bulk cargo
  1. Shipping Fee Rules
  • Shipping cost is calculated based on package weight, volume, destination and delivery method.
  • Both freight prepaid and freight collect are available. Please provide your courier account number in advance if you choose freight collect.
  • Free international express delivery is offered for large orders. Terms for long-term partners can be negotiated separately.
  1. Shipment Tracking
     

    Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.

3. General Order Rules & Notes

  1. MOQ & Sample Service

     

    We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.

  2. Packaging Standard

     

    All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.

4. Customs & Liability Statement

  1. Import Duties & Taxes

     

    All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.

  2. Handling of Lost or Damaged Goods
  • In case of loss or severe damage during transit, please contact us within 48 hours after receiving the tracking information. We will assist you in filing a claim with the logistics provider.
  • We shall not be liable for any losses caused by incorrect delivery address, wrong contact information or the buyer’s refusal to complete customs clearance.

5. Local Pickup in Shenzhen

Local pickup service is available for customers in Shenzhen and surrounding areas:
  • Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong Province, China
  • Business Hours: 09:00 – 18:00, Monday to Friday. Closed on weekends and official public holidays.
  • Notice: Please make an appointment via email or communication tools one day in advance, and present your order information upon pickup.

Contact Information

Email: info@materialparts.com

Tel / WhatsApp: +86 13760382860

الخدمة والتغليف

Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.

Core Services

1. One-stop Sourcing & BOM Support

We specialize in a full range of passive and active electronic components, including SMD resistors, power resistors, connectors, aviation connectors, LED beads, flexible circuit boards, printed circuit boards, and integrated circuits. Our professional team provides BOM list consolidation, component matching, and alternative model recommendation services. We support sample orders, small-batch trial production, and mass production orders with flexible MOQs to meet diverse procurement needs.

2. Genuine Product Guarantee & Full-process Quality Inspection

All products are sourced from official authorized channels and are 100% original genuine parts. Every batch of goods undergoes strict full-process quality inspection before delivery, with complete batch records and traceability documents provided. Our products comply with AEC-Q standards for automotive electronics and high-reliability specifications for medical devices. We eliminate counterfeits, refurbished parts and defective products from the source to secure your project production.

3. Fast Quotation & Order Processing

Our customer service team responds promptly to inquiries and quotation requests. All in-stock orders will be processed within one working day. We provide stocking reservation services for long-term cooperative customers, effectively solving problems such as component shortages and unstable supply chains.

4. Professional Technical Support

Our senior engineer team provides free technical consultation, model selection guidance and original manufacturer datasheets. We assist customers in solving problems related to product R&D, circuit design and component application, providing reliable technical support for project progress.

5. Sourcing for Special Components

Relying on our global supply chain network, we professionally source scarce components, obsolete parts and customized special components to efficiently solve your procurement difficulties.

6. Global Logistics & Document Services

We cooperate with mainstream international logistics providers including DHL, FedEx, UPS and TNT to achieve fast global delivery. We can provide complete export documents such as customs declaration files, commercial invoices and packing lists to ensure smooth customs clearance for international shipments. Local pickup is also available for customers in Shenzhen, China.

Professional Packaging Standards

Electronic components are sensitive to static electricity, collision, moisture and dust. We adopt industry-standard anti-static packaging solutions to fully ensure the integrity of goods during transportation and storage.

1. General Packaging Specifications

  • All components are packed separately to avoid damage caused by friction and collision;
  • Shockproof buffer materials are added for fragile products to ensure transportation safety;
  • Each package is clearly marked with part number, quantity, batch number and specifications for easy inventory counting and management.

2. Classified Professional Packaging

  • Anti-static Packaging: Static-sensitive components such as chips, circuit boards and sensors are packaged with anti-static bags, shielding boxes and conductive foam in strict accordance with international anti-static standards to prevent static damage.
  • Vacuum Moisture-proof Packaging: Moisture-sensitive components are vacuum-sealed with desiccants to isolate humid air, suitable for ocean transportation and long-term storage.
  • Original Factory Packaging: Integrated circuits of brands such as NXP are delivered with original reels, trays or tubes by default, retaining complete original packaging and adapting to automated SMT production lines.
  • Discrete Device Packaging: Discrete devices such as SMD resistors, power resistors and LEDs are quantitatively and classifiedly packaged with accurate quantity and clear marking.
  • Connector / Aviation Connector Packaging: Hard outer packaging is adopted to prevent pin bending and structural deformation.

3. Custom Packaging Services

We provide value-added services including personalized packaging, custom labeling and re-reeling according to customer requirements, fully matching your production and warehouse management standards.

Contact Information

For service consultation or packaging customization, please feel free to contact us:
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
 

Online Inquiry Form

Support Excel, PDF, CSV format files for full BOM list quotation

Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.

الشركة
الرؤى
الصناعات
جميع المنتجات
الدوائر المتكاملة
أجهزة C&I
منفصلة
رقائق الذاكرة
وحدات MPUs و MCUs