عرض أسعار فوري

الصفحة الرئيسية > الدوائر المتكاملة الدوائر المتكاملة > ADUM1200BRZ

ADUM1200BRZ

Dual-channel 2500Vrms digital isolator, 25Mbps, iCoupler, SOIC-8 narrow body, AEC-Q100

12298

المخزون الفعال
انتقل إلى الاستفسار

Image for reference only

جزء الشركة المصنعة ： جزء الشركة المصنعة

ADUM1200BRZ

الحزمة ： الحزمة

SOIC-8 Narrow Body (5.0 x 4.0 x 1.5mm)

العلامة التجارية ： العلامة التجارية
فئات المنتجات:：فئات المنتجات
الالتزام بالجودة
الشحن والدفع
الخدمة والتغليف
دليل المنتج
توصيات أخرى قد تكون مهتماً بها.

MCP2562FD-E/MF

10M08SAM153I7G

KSZ8794CNXIC

TH8056KDC-AAA-014-RE

LT1963AEQ#PBF

PIC24FJ64GA006-I/PT

EN5335QI

DRV8301DCAR

الوصف

نظرة عامة على المنتج

The ADUM1200BRZ from Analog Devices is a dual-channel digital isolator based on iCoupler technology, providing 2500V rms isolation with 25 Mbps data rate. Both channels operate in the same direction (2/0 configuration) and the device features 25kV/us common-mode transient immunity in an SOIC-8 narrow-body package.

المواصفات الرئيسية

القنوات 2 (same direction)
Isolation Rating 2500V rms (1 minute)
معدل البيانات 25 Mbps (max)
تأخير الانتشار 28 ns (typ)
تشويه عرض النبض <3 ns
المناعة العابرة للوضع المشترك 25 kV/us (min)
جهد الإمداد 2.7V to 5.5V (each side)
Supply Current (per channel) 0.8 mA (typ at 1Mbps)
درجة حرارة التشغيل -40 to 125 C
الحزمة SOIC-8 (narrow body)

الميزات

  • iCoupler technology eliminates optocoupler design issues
  • 25 Mbps data rate with low propagation delay
  • 3V/5V level translation between sides
  • مؤهل AEC-Q100 لتطبيقات السيارات
  • Refresh circuitry ensures DC correctness

التطبيقات

  • SPI and I2C bus isolation
  • RS-232/422/485 transceiver isolation
  • Motor drive and power supply isolation
  • Medical equipment isolation barriers
  • عزل نظام إدارة البطارية

The ADUM1200BRZ from Analog Devices is a dual-channel digital isolator built on the proprietary iCoupler technology. Unlike traditional optocouplers, iCoupler devices use chip-scale microtransformers for signal transfer across the isolation barrier, providing superior performance with lower power consumption, higher data rates, and better common-mode transient immunity. The ADUM1200BRZ provides 2500V rms isolation with 25 Mbps data rate, making it ideal for isolating high-speed digital interfaces such as SPI, UART, and general-purpose logic signals.

The ADUM1200BRZ uses Analog Devices iCoupler technology to transfer digital signals across an isolation barrier. **Signal Transfer Subsystem**: On-chip planar microtransformers fabricated on a polyimide insulation layer provide galvanic isolation. Data is encoded on the input side, driven through the transformer as high-frequency pulses, and decoded on the output side. The polyimide insulation provides the 2500V rms isolation rating. **Refresh Mechanism**: A periodic refresh signal is sent across the barrier to maintain the correct output state even when input data is static (DC). If the refresh signal is not received, the output defaults to a predetermined safe state. **Power Isolation**: Each side of the isolator operates from its own independent supply (2.7V to 5.5V), enabling level translation between 3V and 5V logic domains. **EMI Subsystem**: Shielding and careful layout minimize radiated emissions from the high-frequency transformer drive signals.

دبوس الاسم الوصف
1 VIA Channel A input (side 1)
2 VIB Channel B input (side 1)
3 GND1 الجانب 1 الأرضي
4 VDD1 Side 1 supply (2.7V to 5.5V)
5 VOA Channel A output (side 2)
6 VOB Channel B output (side 2)
7 GND2 الجانب 2 الأرضي
8 VDD2 Side 2 supply (2.7V to 5.5V)
  • SPI Isolation: Isolating SPI communication between MCU and high-voltage ADC/DAC in motor drives
  • RS-485 Isolation: Galvanic isolation for RS-485 transceivers in industrial network nodes
  • Medical Equipment: Patient isolation barriers in monitoring and diagnostic devices
  • Battery Management: Isolating communication between battery cell monitors and host controller
  • Power Supply Control: Isolating PWM control signals in isolated DC-DC converters
الطراز الشركة المصنعة الفرق الرئيسي
ADUM1201BRZ ADI Reverse direction (0/2 channels)
ISO7221CDR TI 150Mbps, capacitive isolation, SOIC-8
Si8621BC-B-ISR مختبرات السيليكون 150Mbps, capacitive, very low power
HCPL-2531 برودكوم Optocoupler, 10Mbps, dual channel
ISOM8110DFNR TI Opto-emulator, 25Mbps, DFN-8
قطع الغيار الموصى بها

LT1963AEQ#PBF

1.5A low-noise LDO regulator, 40µVrms noise, 340mV dropout, 1.8-20V input, TSSOP-16

العلامة التجارية:

الحزمة:

TSSOP-16 with exposed pad (5.0 x 6.4mm)
متوفر في المخزون:
13809pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

MAX5741AUB+

8-channel 8-bit voltage output DAC, SPI 30MHz, µMAX-8, rail-to-rail output

العلامة التجارية:

الحزمة:

µMAX-8 (3x3mm)
متوفر في المخزون:
5508pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

LT3092EST#PBF

200mA two-terminal programmable current source, 1.2-40V, 1% accuracy in SOT-223

العلامة التجارية:

الحزمة:

SOT-223-3 (6.5 x 3.5 x 1.6mm)
متوفر في المخزون:
7025pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

AD536AJHZ

True RMS-to-DC converter, 0.2% accuracy, 2MHz bandwidth, ±3V to ±18V supply, 20-lead LCC package for high-reliability applications

العلامة التجارية:

الحزمة:

20-lead LCC (HZ)
متوفر في المخزون:
6527pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

AD536AJDZ

True RMS-to-DC converter, 0.2% accuracy, 2MHz bandwidth, ±3V to ±18V supply, 14-lead CERDIP package for precision measurement

العلامة التجارية:

الحزمة:

14-lead CERDIP (J)
متوفر في المخزون:
3031pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

LTC3789EGN#TRPBF

4-switch synchronous buck-boost DC/DC controller, 4-38V input, 0.8-38V output, SSOP-28 package, up to 98% efficiency

العلامة التجارية:

الحزمة:

SSOP-28 (GN)
متوفر في المخزون:
6228pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار
ضمان الجودة

Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.

1. Authorized & Genuine Sourcing Promise

All of our electronic components are procured from official authorized distributors and original manufacturers. We strictly reject counterfeits, refurbished parts, disassembled components and gray-market goods. Every product is guaranteed to be brand-new original parts and fully consistent with the original technical parameters. For branded products such as NXP IC series, we maintain complete supply channel documents to realize full product traceability.

2. Strict Full-batch Quality Inspection

We implement 100% full-batch quality control for all goods before shipment. Our professional QC team conducts multi-dimensional tests including appearance inspection, electrical parameter testing, performance verification and packaging check. Each batch of components is attached with complete inspection reports and batch records. We stick to zero-tolerance standards for defective products to ensure every piece of component meets industrial application requirements.

3. Industry Standard Compliance

Our products comply with a variety of international industry quality standards to adapt to high-standard application scenarios:
  • إلكترونيات السيارات: All automotive-grade components pass AEC-Q series certification, featuring excellent stability and durability to adapt to complex vehicle operating environments.
  • الأجهزة الطبية: High-reliability components meet medical industry safety and compliance regulations, ensuring stable operation for medical equipment.
  • Industrial Control & Consumer Electronics: Products conform to universal international electronic industry standards, suitable for long-term continuous operation of various equipment.

4. Professional Reliability Control

For static-sensitive, moisture-sensitive and precision components such as ICs, PCBs, sensors and connectors, we carry out reliability screening in advance. Combined with standardized ESD anti-static packaging and vacuum moisture-proof packaging, we avoid component damage caused by static electricity, dampness or collision during storage and transportation, and retain the original performance of products.

5. Traceability Management System

We establish a complete product traceability system. Each batch of goods corresponds to independent batch number, sourcing record, inspection record and delivery record. Customers can query the whole lifecycle information of components at any time. This system effectively solves quality risks and facilitates after-sales handling and production quality control for your company.

6. After-sales Quality Guarantee

If any product is confirmed to have non-conformity quality problems due to our reasons after receipt, we provide free return, exchange and supplementary delivery services. Our professional quality team will also conduct root cause analysis to optimize our quality control process. We respond to quality feedback within 24 hours to resolve your worries efficiently.

اتصل بنا

If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:

 

Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China

 

الشحن والدفع

Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.

1. Payment Terms

We offer a variety of secure and convenient payment methods to meet diverse business cooperation needs. Details are as follows:
  1. Accepted Payment Methods
  • T/T (Bank Wire Transfer): The primary settlement method for bulk orders and a widely used international payment channel.
  • PayPal: Ideal for small orders, sample orders and quick payments.

  1. Settlement Currency

     

    US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.

  2. Bank Charges

     

    All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.

  3. Payment Requirements
  • Sample and small orders: Shipment will be arranged upon full payment.
  • In-stock bulk orders: Goods will be delivered within 2 to 3 working days after full payment.

2. Shipping & Delivery

We partner with leading global logistics providers to ensure safe and fast delivery worldwide. Relevant details are listed below:
  1. Logistics Partners
  • International Express: DHL, FedEx, UPS, TNT
  • Economy Logistics: Air freight and sea freight for large-volume cargo
  • Domestic Delivery: SF Express, Yunda Express
  1. Order Processing Time
  • In-stock items: Orders confirmed and fully paid before 14:00 (GMT+8) will be shipped on the same day. All other orders will be dispatched within 1 to 2 working days.
  • Out-of-stock or sourced items: The delivery lead time will be confirmed separately according to brand and inventory status.
  1. Estimated Transit Time
  • International Express: 3 – 7 working days globally
  • Air Freight: 7 – 12 working days
  • Sea Freight: 25 – 40 working days for heavy and large bulk cargo
  1. Shipping Fee Rules
  • Shipping cost is calculated based on package weight, volume, destination and delivery method.
  • Both freight prepaid and freight collect are available. Please provide your courier account number in advance if you choose freight collect.
  • Free international express delivery is offered for large orders. Terms for long-term partners can be negotiated separately.
  1. Shipment Tracking
     

    Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.

3. General Order Rules & Notes

  1. MOQ & Sample Service

     

    We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.

  2. Packaging Standard

     

    All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.

4. Customs & Liability Statement

  1. Import Duties & Taxes

     

    All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.

  2. Handling of Lost or Damaged Goods
  • In case of loss or severe damage during transit, please contact us within 48 hours after receiving the tracking information. We will assist you in filing a claim with the logistics provider.
  • We shall not be liable for any losses caused by incorrect delivery address, wrong contact information or the buyer’s refusal to complete customs clearance.

5. Local Pickup in Shenzhen

Local pickup service is available for customers in Shenzhen and surrounding areas:
  • Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong Province, China
  • Business Hours: 09:00 – 18:00, Monday to Friday. Closed on weekends and official public holidays.
  • Notice: Please make an appointment via email or communication tools one day in advance, and present your order information upon pickup.

Contact Information

Email: info@materialparts.com

Tel / WhatsApp: +86 13760382860

الخدمة والتغليف

Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.

Core Services

1. One-stop Sourcing & BOM Support

We specialize in a full range of passive and active electronic components, including SMD resistors, power resistors, connectors, aviation connectors, LED beads, flexible circuit boards, printed circuit boards, and integrated circuits. Our professional team provides BOM list consolidation, component matching, and alternative model recommendation services. We support sample orders, small-batch trial production, and mass production orders with flexible MOQs to meet diverse procurement needs.

2. Genuine Product Guarantee & Full-process Quality Inspection

All products are sourced from official authorized channels and are 100% original genuine parts. Every batch of goods undergoes strict full-process quality inspection before delivery, with complete batch records and traceability documents provided. Our products comply with AEC-Q standards for automotive electronics and high-reliability specifications for medical devices. We eliminate counterfeits, refurbished parts and defective products from the source to secure your project production.

3. Fast Quotation & Order Processing

Our customer service team responds promptly to inquiries and quotation requests. All in-stock orders will be processed within one working day. We provide stocking reservation services for long-term cooperative customers, effectively solving problems such as component shortages and unstable supply chains.

4. Professional Technical Support

Our senior engineer team provides free technical consultation, model selection guidance and original manufacturer datasheets. We assist customers in solving problems related to product R&D, circuit design and component application, providing reliable technical support for project progress.

5. Sourcing for Special Components

Relying on our global supply chain network, we professionally source scarce components, obsolete parts and customized special components to efficiently solve your procurement difficulties.

6. Global Logistics & Document Services

We cooperate with mainstream international logistics providers including DHL, FedEx, UPS and TNT to achieve fast global delivery. We can provide complete export documents such as customs declaration files, commercial invoices and packing lists to ensure smooth customs clearance for international shipments. Local pickup is also available for customers in Shenzhen, China.

Professional Packaging Standards

Electronic components are sensitive to static electricity, collision, moisture and dust. We adopt industry-standard anti-static packaging solutions to fully ensure the integrity of goods during transportation and storage.

1. General Packaging Specifications

  • All components are packed separately to avoid damage caused by friction and collision;
  • Shockproof buffer materials are added for fragile products to ensure transportation safety;
  • Each package is clearly marked with part number, quantity, batch number and specifications for easy inventory counting and management.

2. Classified Professional Packaging

  • Anti-static Packaging: Static-sensitive components such as chips, circuit boards and sensors are packaged with anti-static bags, shielding boxes and conductive foam in strict accordance with international anti-static standards to prevent static damage.
  • Vacuum Moisture-proof Packaging: Moisture-sensitive components are vacuum-sealed with desiccants to isolate humid air, suitable for ocean transportation and long-term storage.
  • Original Factory Packaging: Integrated circuits of brands such as NXP are delivered with original reels, trays or tubes by default, retaining complete original packaging and adapting to automated SMT production lines.
  • Discrete Device Packaging: Discrete devices such as SMD resistors, power resistors and LEDs are quantitatively and classifiedly packaged with accurate quantity and clear marking.
  • Connector / Aviation Connector Packaging: Hard outer packaging is adopted to prevent pin bending and structural deformation.

3. Custom Packaging Services

We provide value-added services including personalized packaging, custom labeling and re-reeling according to customer requirements, fully matching your production and warehouse management standards.

Contact Information

For service consultation or packaging customization, please feel free to contact us:
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
 

Online Inquiry Form

Support Excel, PDF, CSV format files for full BOM list quotation

Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.

الشركة
الرؤى
الصناعات
جميع المنتجات
الدوائر المتكاملة
أجهزة C&I
منفصلة
رقائق الذاكرة
وحدات MPUs و MCUs