AD5231BRUZ10-REEL7


1024-position nonvolatile digital potentiometer, 10kΩ, SPI, EEMEM, 16-TSSOP, REEL7 packaging

9739

المخزون الفعال

Image for reference only

جزء الشركة المصنعة : جزء الشركة المصنعة

AD5231BRUZ10-REEL7

الحزمة : الحزمة

16-TSSOP (5.0x4.4mm)

العلامة التجارية : العلامة التجارية
توصيات أخرى قد تكون مهتماً بها.
الوصف

نظرة عامة على المنتج

The AD5231BRUZ10-REEL7 from Analog Devices is a nonvolatile memory, 1024-position digital potentiometer with 10kΩ terminal resistance. Featuring an SPI-compatible interface, EEMEM for wiper setting storage, and versatile programming with 16 modes of operation, it is housed in a 16-lead TSSOP package and operates over -40°C to +85°C.

المواصفات الرئيسية

Category Digital Potentiometer
Resolution 1024 positions (10-bit)
Terminal Resistance 10 kΩ
Number of Circuits 1
Memory Type Nonvolatile (EEMEM)
الواجهة SPI (3-wire compatible)
جهد الإمداد 2.7V ~ 5.5V (single) or ±2.25V ~ 2.75V (dual)
EEMEM Restore Time 140 μs (typical)
الاحتفاظ بالبيانات 100 years (typical)
Temperature Coefficient 600 ppm/°C (typical)
درجة حرارة التشغيل -40°C ~ 85°C
الحزمة 16-TSSOP
Packaging Tape & Reel (REEL7)
حالة الجزء Production

الميزات

  • 1024-position resolution for precise adjustment
  • Nonvolatile EEMEM maintains wiper setting at power-on
  • EEMEM restore time: 140μs typical
  • Full monotonic operation guaranteed
  • 16 modes of operation via SPI including scratchpad, increment/decrement
  • ±6 dB/step log taper increment/decrement commands
  • Wiper setting readback capability
  • 28 bytes extra EEMEM for user-defined data
  • Permanent memory write protection
  • Linear and logarithmic adjustment modes

التطبيقات

  • Mechanical potentiometer replacement
  • Instrumentation gain and offset adjustment
  • Programmable filters, delays, and time constants
  • Programmable power supplies
  • Sensor calibration and trimming

The AD5231BRUZ10-REEL7 from Analog Devices is a nonvolatile memory, digitally controlled potentiometer (DCP) with 1024-step resolution and 10kΩ terminal resistance. It performs the same electronic adjustment function as a mechanical potentiometer with enhanced resolution, solid-state reliability, and remote controllability. The AD5231 features versatile programming using a standard 3-wire SPI-compatible serial interface supporting 16 modes of operation, including scratchpad programming, EEMEM storing and restoring, linear increment/decrement, ±6 dB/step log taper adjustment, and wiper setting readback. The EEMEM stores the wiper setting and automatically transfers it to the RDAC register at power-on in 140μs. An additional 28 bytes of EEMEM are available for user-defined data such as look-up tables or system identification. The REEL7 suffix indicates Tape & Reel packaging.

The AD5231 operates as a digitally controlled resistor with three terminals: A, B, and W (wiper). The 1024-position RDAC register controls the wiper position, dividing the total resistance (10kΩ) between W-A and W-B. The SPI interface receives 24-bit command words consisting of an instruction byte and a data byte. The scratchpad register allows direct wiper position programming without affecting EEMEM. The EEMEM stores the desired wiper position permanently and restores it automatically at power-on. Increment/decrement commands move the wiper one step at a time without requiring full SPI data transfers. The ±6 dB commands double or halve the wiper setting for logarithmic adjustment. Write protection (WP) prevents accidental EEMEM modification, while the PR pin allows hardware EEMEM restore.

دبوس الاسم النوع الوصف
1 VDD PWR Positive supply (2.7V-5.5V)
2 GND GND أرضي
3 VSS PWR Negative supply (dual supply mode)
4 A التناظرية Terminal A of resistor
5 W التناظرية Wiper terminal
6 B التناظرية Terminal B of resistor
7 RDY O Ready output (EEMEM operation status)
8 WP I Write protect (protects EEMEM)
9 PR I Program restore (hardware EEMEM recall)
10 CS I Chip select (active low)
11 SDI I SPI data input
12 SDO O SPI data output (wiper readback)
13 CLK I SPI clock
14 نورث كارولاينا - No connect
15 نورث كارولاينا - No connect
16 نورث كارولاينا - No connect
  • Gain Adjustment: Remote gain control of op-amp circuits in instrumentation and audio
  • Sensor Calibration: Trim offset and span of sensor signal chains at production or in-field
  • مزود الطاقة: Programmable output voltage adjustment in lab and bench supplies
  • Filter Tuning: Adjustable RC time constants for programmable filters and oscillators
  • LCD Contrast: Nonvolatile contrast adjustment for LCD modules
الطراز الشركة المصنعة الفرق الرئيسي
AD5231BRUZ50 الأجهزة التناظرية 50kΩ resistance option
AD5231BRUZ100 الأجهزة التناظرية 100kΩ resistance option
AD5235BRUZ10 الأجهزة التناظرية Dual channel, 1024-position, 10kΩ
MCP4161-103E/SN الرقاقة الدقيقة 7-bit (129 pos), 10kΩ, SPI, 8-SOIC
AD8400ARZ10 الأجهزة التناظرية 256-position, volatile, 10kΩ, simpler
قطع الغيار الموصى بها
Single-phase energy metering IC, <0.1% error, SPI, shunt/CT, LFCSP-28

العلامة التجارية:

الحزمة:

LFCSP-28 (5×5 mm)
متوفر في المخزون:
5098pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

Dual high-speed op amp, 50MHz, 350V/µs, drives unlimited Cload, 8-SOIC

العلامة التجارية:

الحزمة:

8-SOIC (3.9×5.0×1.5 mm)
متوفر في المخزون:
7183pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

Transformer-coupled isolation amplifier, 750Vrms isolation, 2kHz bandwidth, 10-DIP, with integrated isolated power

العلامة التجارية:

الحزمة:

10-Pin DIP
متوفر في المخزون:
14100pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

8-ch 12-bit 454kSPS ADC DAS, bipolar inputs, parallel/serial, 44-MQFP, 5V supply

العلامة التجارية:

الحزمة:

MQFP-44 (10 x 10 mm)
متوفر في المخزون:
9131pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

Quad 8-bit voltage output DAC, 4-channel, MPU-compatible, 20-SOIC, no external trims

العلامة التجارية:

الحزمة:

SOIC-20 (Wide) (7.5 x 12.8 mm)
متوفر في المخزون:
5393pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

Dual UART, 24Mbps, 128-word FIFO, SPI/I2C, TQFN-32, IrDA

العلامة التجارية:

الحزمة:

TQFN-32 (5.0 x 5.0 x 0.75 mm)
متوفر في المخزون:
3679pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

ضمان الجودة

تخضع جميع المكونات الإلكترونية التي نحصل عليها من سلاسل التوريد الشريكة لنا لعمليات فحص صارمة للواردات، ومن خلال الاختبارات الدقيقة، نضمن أن كل ما يتم تسليمه للعملاء هو قطع أصلية أصلية وتفي بمتطلبات الجودة، بالإضافة إلى ذلك، نحتفظ بسجلات فحص كاملة لجعل عملية سلسلة التوريد بأكملها واضحة ويمكن تتبعها.

التصديق
لقد حصلنا على عدد من الشهادات الاحترافية وقمنا ببناء مختبر الاختبار الاحترافي الخاص بنا، وهذا يضمن أن كل منتج نقدمه لعملائنا يلبي أعلى متطلبات الجودة، ونجري الاختبارات وفقًا لإجراءات صارمة لضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان قطع أصلية أصلية، نتعاون أيضًا مع مؤسسات اختبار موثوقة من طرف ثالث لفحص الجودة الصارم، ونولي دائمًا أهمية كبيرة للجودة ونلتزم تمامًا بمعايير الصناعة واللوائح ذات الصلة ومتطلبات ISO 9001: 2015.

الشحن والدفع

تخضع جميع المكونات الإلكترونية التي نحصل عليها من سلاسل التوريد الشريكة لنا لعمليات فحص صارمة للواردات، ومن خلال الاختبارات الدقيقة، نضمن أن كل ما يتم تسليمه للعملاء هو قطع أصلية أصلية وتفي بمتطلبات الجودة، بالإضافة إلى ذلك، نحتفظ بسجلات فحص كاملة لجعل عملية سلسلة التوريد بأكملها واضحة ويمكن تتبعها.

التصديق
لقد حصلنا على عدد من الشهادات الاحترافية وقمنا ببناء مختبر الاختبار الاحترافي الخاص بنا، وهذا يضمن أن كل منتج نقدمه لعملائنا يلبي أعلى متطلبات الجودة، ونجري الاختبارات وفقًا لإجراءات صارمة لضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان قطع أصلية أصلية، نتعاون أيضًا مع مؤسسات اختبار موثوقة من طرف ثالث لفحص الجودة الصارم، ونولي دائمًا أهمية كبيرة للجودة ونلتزم تمامًا بمعايير الصناعة واللوائح ذات الصلة ومتطلبات ISO 9001: 2015.

الخدمة والتغليف

تخضع جميع المكونات الإلكترونية التي نحصل عليها من سلاسل التوريد الشريكة لنا لعمليات فحص صارمة للواردات، ومن خلال الاختبارات الدقيقة، نضمن أن كل ما يتم تسليمه للعملاء هو قطع أصلية أصلية وتفي بمتطلبات الجودة، بالإضافة إلى ذلك، نحتفظ بسجلات فحص كاملة لجعل عملية سلسلة التوريد بأكملها واضحة ويمكن تتبعها.

التصديق
لقد حصلنا على عدد من الشهادات الاحترافية وقمنا ببناء مختبر الاختبار الاحترافي الخاص بنا، وهذا يضمن أن كل منتج نقدمه لعملائنا يلبي أعلى متطلبات الجودة، ونجري الاختبارات وفقًا لإجراءات صارمة لضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان جودة المنتج المستقرة والمعايير الدقيقة، ولضمان قطع أصلية أصلية، نتعاون أيضًا مع مؤسسات اختبار موثوقة من طرف ثالث لفحص الجودة الصارم، ونولي دائمًا أهمية كبيرة للجودة ونلتزم تمامًا بمعايير الصناعة واللوائح ذات الصلة ومتطلبات ISO 9001: 2015.