FSUSB63UMX

Product Overview The FSUSB63UMX from onsemi is a low-power 3:1 USB 2.0 high-speed switch/multiplexer in a tiny 1.80mm x 1.80mm UMLP-12 package. Supporting USB 2.0 480Mbps signaling with 830MHz bandwidth and only 6-ohm typical on-resistance, it enables USB port sharing and multiplexing in smartphones, tablets, and dock stations. Key Specifications Topology 3:1 USB Switch / […]

FT234XD-R

Product Overview The FT234XD-R from FTDI Chip is an ultra-compact USB 2.0 full-speed to UART serial interface bridge in a 3mm x 3mm DFN-12 package. It converts USB to a UART serial port with data rates from 300bps to 3Mbaud, requires no external crystal, and supports 1.8V to 3.3V I/O voltage, making it ideal for […]

NTMD6N02R2G

Product Overview The NTMD6N02R2G from onsemi is a dual N-channel enhancement-mode MOSFET in an SOIC-8 package. Rated at 20V VDSS with 55mOhm maximum RDS(ON) at 4.5V VGS, it provides two independent low-side switches in a single package, ideal for load switching, DC-DC converter, and battery management applications where board space is at a premium. Key […]

SESD0402X1BN-0010-098

Product Overview The SESD0402X1BN-0010-098 from onsemi is a single-channel unidirectional ESD protection diode in an ultra-compact 0402 (1005 metric) package. With an ultra-low capacitance of 0.4pF and 15kV IEC 61000-4-2 contact discharge rating, it provides robust electrostatic discharge protection for high-speed data lines without degrading signal integrity. Key Specifications Channels 1 (unidirectional) Working Voltage (VRWM) […]

NCP5500DT33RKG

Product Overview The NCP5500DT33RKG from onsemi is a 150mA ultra-low quiescent current LDO regulator with a fixed 3.3V output. Featuring an exceptionally low 3.5uA ground current and wide 3.5V to 40V input range, it is specifically designed for always-on battery-powered and automotive applications where minimal standby power consumption is critical. Key Specifications Output Voltage 3.3V […]

BT134W-600E

Product Overview The BT134W-600E from WeEn/NXP is a 4A RMS, 600V three-quadrant triac in a compact SOT-223 surface-mount package. With its high-sensitivity E-grade gate (5mA IGT), this device is specifically designed for direct drive from low-power microcontrollers and digital logic circuits in space-constrained AC switching applications. Key Specifications Repetitive Off-State Voltage (VDRM) 600V RMS On-State […]

BTA16-600BWRG

Product Overview The BTA16-600BWRG from STMicroelectronics is a 16A RMS, 600V three-quadrant triac in an insulated TO-247 package. The B-sensitivity gate (50mA IGT) combined with high commutation capability (BW suffix, 1000V/us dv/dt) makes it ideal for AC motor control, lighting dimmers, and solid-state relay applications requiring robust switching of inductive loads. Key Specifications Repetitive Off-State […]

LM321SN3T1G

Product Overview The LM321SN3T1G from onsemi is a single-channel, low-power operational amplifier in a tiny SOT-23-5 package. Supporting a wide supply range of 3V to 32V (single supply) or plus/minus 1.5V to plus/minus 16V (dual supply), this 1MHz bandwidth amplifier draws only 430uA typical supply current, making it an excellent choice for battery-powered and space-constrained […]

LM317DCYR

Product Overview The LM317DCYR from Texas Instruments is a classic 1.5A adjustable positive voltage linear regulator in a SOT-223 package. It provides an output voltage range of 1.25V to 37V set by just two external resistors. With excellent line and load regulation, built-in thermal shutdown, and current limiting, the LM317 remains one of the most […]

BR24G512FJ-3AGTE2

Product Overview The BR24G512FJ-3AGTE2 is a 512Kbit (64K x 8-bit) serial I2C EEPROM manufactured by ROHM Semiconductor. It features a wide operating voltage range of 1.7V to 5.5V and supports high-speed I2C modes up to 3.4MHz. Housed in a compact TSSOP-8 package, this device is ideal for storing configuration data, calibration parameters, and user settings […]