Instant Quote

Home > Integrated Circuits ICs > L6562AN

L6562AN

Transition-mode PFC controller, 1% Vref, 30μA Istart, 600/800mA gate, DIP-8

13491

Effective Inventory
Go to Inquiry

Image for reference only

Manufacturer Part：

L6562AN

Package：

DIP-8 (9.8 x 6.6 x 3.9mm)

Brand：
Product Categories：
Quality Commitment
Shipping & Payment
Service & Packaging
Product Manual
Other recommendations you may be interested in.

STM32L072RBT6

TPS65217CRSLR

SN74HC273NSR

ADE7953ACPZ-RL

SN74HC138N

ATMEGA328-AU

AD826ARZ-REEL7

TPA0211DGNR

Description

Product Overview

The L6562AN from STMicroelectronics is a transition-mode (TM) power factor correction (PFC) controller in a DIP-8 package. It features a highly linear multiplier with THD optimizer, 1% accurate internal reference, ultra-low 30μA startup current, and 600mA/800mA source/sink gate driver for IEC61000-3-2 compliant power supplies up to 400W.

Key Specifications

Operating Mode Transition Mode (Critical Conduction Mode)
Supply Voltage 10.5V to 22.5V
Startup Current 30μA typ.
Quiescent Current 2.5mA typ.
Reference Voltage 2.5V (1% accuracy at TJ=25°C)
Gate Drive Source Current -600mA peak
Gate Drive Sink Current +800mA peak
OVP Dynamic and Static overvoltage protection
Disable Function Voltage on INV pin below 0.2V
Package DIP-8 (through-hole)
Operating Temperature -25°C to +125°C

Features

  • Proprietary multiplier design for minimum THD
  • Very accurate adjustable output overvoltage protection
  • Ultra-low 30μA startup current
  • Low 2.5mA quiescent current
  • Digital leading-edge blanking on current sense
  • Disable function via INV pin
  • 1% internal reference voltage accuracy
  • 600mA/800mA totem pole gate driver
  • Active pull-down during UVLO and voltage clamp
  • THD optimizer circuit for reduced crossover distortion

Applications

  • PFC pre-regulators for IEC61000-3-2 compliant SMPS
  • Flat TV and monitor power supplies
  • Desktop PC and gaming console PSUs
  • High-end AC-DC adapters up to 400W
  • Electronic ballasts

The L6562AN from STMicroelectronics is a current-mode PFC controller operating in transition mode (TM). Sharing the same pinout as predecessors L6561 and L6562, it offers improved performance with a highly linear multiplier featuring a THD optimizer circuit that reduces AC input current distortion near zero-crossings. The device features an accurate 1% internal reference voltage, dynamic and static output overvoltage protection, ultra-low 30μA startup current, and a -600mA/+800mA totem-pole gate driver suitable for driving external MOSFETs in PFC boost converters up to 400W.

The L6562A controls an external MOSFET in a boost converter topology operating in critical conduction mode (transition mode). The multiplier generates a reference current signal proportional to both the rectified AC input voltage (via the MULT pin) and the error amplifier output (via INV/COMP pins). The MOSFET turns on at the start of each switching cycle and turns off when the source current through the sense resistor reaches the multiplier reference. The ZCD pin detects when the boost inductor current returns to zero, triggering the next MOSFET turn-on. This zero-current switching minimizes switching losses and naturally shapes the input current to follow the line voltage, achieving high power factor.

Pin Name Type Function
1 INV Input Error amplifier inverting input / disable (below 0.2V = off)
2 COMP I/O Error amplifier output / compensation network
3 MULT Input Multiplier input (rectified AC voltage sense)
4 CS Input Current sense input (peak current limiting)
5 ZCD Input Zero current detection (inductor demagnetization)
6 GND Power Ground
7 GD Output Gate driver output for external MOSFET
8 VCC Power Supply voltage (10.5V to 22.5V)
  • IEC61000-3-2 compliant PFC pre-regulators for flat TVs and monitors
  • Desktop PC and server power supply PFC stages (up to 400W)
  • High-end AC-DC adapter and charger PFC front-ends
  • Electronic ballast power factor correction
  • Dimmable 80W offline LED driver PFC stages
Manufacturer Part Number Package Notes
ST L6562AD SO-8 SMD version, same function
ST L6562ADTR SO-8 Tape and reel SMD version
ST L6561N DIP-8 Predecessor, less features
TI UCC28051D SO-8 Transition-mode PFC controller
Infineon ICE2PCS01G SO-8 CCM/TM PFC controller alternative
Recommend Parts

STM32L072RBT6

Cortex-M0+ ultra-low-power MCU, 32MHz, 128KB Flash, crystal-less USB, LQFP-64

Brand:

Package:

LQFP-64 (10×10 mm)
In stock:
14446pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

STM32F407VET6

Cortex-M4F MCU, 168MHz, 512KB Flash, 192KB SRAM, Ethernet, USB OTG, LQFP-100

Brand:

Package:

LQFP-100 (14×14×1.4 mm)
In stock:
2870pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

STM32F302VDT6

ARM Cortex-M4F MCU, 72MHz, 384KB Flash, 64KB SRAM, dual ADC, 4 comparators, 2 op amps, LQFP-100

Brand:

Package:

LQFP-100 (14 x 14 x 1.4 mm)
In stock:
12274pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

STM32F407IGH6

ARM Cortex-M4F MCU, 168MHz, 1MB Flash, 192KB SRAM, Ethernet, USB OTG HS, UFBGA-176

Brand:

Package:

UFBGA-176 (10 x 10 mm, 0.65mm pitch)
In stock:
9303pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

TL084CDT

Quad JFET-input op amp, 4MHz GBP, 16V/µs slew rate, 200pA bias current, SOIC-14

Brand:

Package:

SOIC-14 (8.75 x 4 x 1.65 mm)
In stock:
9834pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

STM32L152RCT6

Ultra-low-power Cortex-M3 MCU, 32MHz, 256KB Flash, 32KB SRAM, LCD controller, LQFP-64

Brand:

Package:

LQFP-64 (10x10mm)
In stock:
5417pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
Quality Assurance

All electronic components we source from our partnered supply chains go through strict incoming inspections.Through careful testing, we ensure everything delivered to customers is genuine original parts and meets quality requirements.In addition, we keep complete inspection records to make the entire supply chain process clear and traceable.

Certification
We have obtained a number of professional certifications and built our own professional testing laboratory.This ensures that every product we deliver to our customers meets the highest quality requirements.We conduct tests in strict accordance with procedures to ensure stable product quality and accurate parameters.To guarantee genuine original parts, we also cooperate with reliable third-party testing institutions for strict quality inspection.We always attach great importance to quality and fully comply with industry standards, relevant regulations, and ISO 9001:2015 requirements.

Shipping & Payment

All electronic components we source from our partnered supply chains go through strict incoming inspections.Through careful testing, we ensure everything delivered to customers is genuine original parts and meets quality requirements.In addition, we keep complete inspection records to make the entire supply chain process clear and traceable.

Certification
We have obtained a number of professional certifications and built our own professional testing laboratory.This ensures that every product we deliver to our customers meets the highest quality requirements.We conduct tests in strict accordance with procedures to ensure stable product quality and accurate parameters.To guarantee genuine original parts, we also cooperate with reliable third-party testing institutions for strict quality inspection.We always attach great importance to quality and fully comply with industry standards, relevant regulations, and ISO 9001:2015 requirements.

Service & Packaging

All electronic components we source from our partnered supply chains go through strict incoming inspections.Through careful testing, we ensure everything delivered to customers is genuine original parts and meets quality requirements.In addition, we keep complete inspection records to make the entire supply chain process clear and traceable.

Certification
We have obtained a number of professional certifications and built our own professional testing laboratory.This ensures that every product we deliver to our customers meets the highest quality requirements.We conduct tests in strict accordance with procedures to ensure stable product quality and accurate parameters.To guarantee genuine original parts, we also cooperate with reliable third-party testing institutions for strict quality inspection.We always attach great importance to quality and fully comply with industry standards, relevant regulations, and ISO 9001:2015 requirements.

Company
insights
Industries
All Products
Integrated Circuits
C&I Devices
Discrete
Memory Chips
MPUs & MCUs