Presupuesto instantáneo

Inicio > Circuitos integrados IC > PIC18F4520-I/P

PIC18F4520-I/P

8-bit PIC18 MCU, 32KB Flash, 10 MIPS, 13-ch ADC, PDIP-40, 2-5.5V

11036

Inventario efectivo
Ir a la consulta

Image for reference only

Pieza del fabricante：

PIC18F4520-I/P

Paquete：

PDIP-40 / P-40 (52.0 x 14.1mm, 2.54mm pitch, through-hole)

Marca：
Categorías de productos：
Compromiso de calidad
Envíos y pagos
Servicio y embalaje
Manual del producto
Otras recomendaciones que pueden interesarle.

MMSZ5263BT1G

SMBJ60A-13-F

KSZ8863RLL

PIC16F1823-E/SL

H57V2562GTR-75C

LT1963AES8

XC7Z010-1CLG400I

UCC2804DTR

Descripción

Productos

The PIC18F4520-I/P from Microchip Technology is an 8-bit PIC18 high-performance microcontroller with 32KB Flash, 1536B RAM, and 256B EEPROM in a 40-pin PDIP through-hole package. Running at up to 10 MIPS at 40MHz, it features 13-channel 10-bit ADC, 5 PWM outputs, EUSART, SPI, I2C, and four timers.

Especificaciones

Núcleo PIC18 8-bit RISC
Max Performance 10 MIPS @ 40MHz (4MHz with 4xPLL)
Flash Memory 32 KB
SRAM 1536 Bytes
Data EEPROM 256 Bytes
I/O Pins 36
ADC 10-bit, 13 channels, 100ksps
Temporizadores 4 (2x 8-bit, 2x 16-bit)
PWM Outputs 5
Comunicación EUSART, MSSP (SPI/I2C)
Comparators 2
Tensión de alimentación 2.0V to 5.5V
Temperatura de funcionamiento -40 to +85°C (I suffix)
Paquete PDIP-40 (P suffix)

Características

  • 32KB enhanced Flash with self-write capability
  • 1536B SRAM and 256B data EEPROM
  • Internal oscillator: 31kHz to 8MHz with 4xPLL
  • Fail-Safe Clock Monitor
  • Programmable BOR and LVD modules
  • EUSART with LIN bus support
  • MSSP supporting SPI and I2C master/slave
  • 5 PWM outputs with enhanced CCP modules
  • 2 analog comparators
  • Low-power modes: Idle (5.8µA) and Sleep (0.1µA)

Aplicaciones

  • Industrial control and monitoring
  • Motor control and drive
  • Automotive accessories
  • Consumer electronics
  • Data acquisition systems

The PIC18F4520-I/P from Microchip is an 8-bit PIC18 MCU with 32KB Flash, 1536B SRAM, 256B EEPROM in PDIP-40. Runs at 10 MIPS with internal 8MHz+PLL oscillator. Features 13-ch 10-bit ADC, 5 PWM, EUSART with LIN, MSSP (SPI/I2C), 2 comparators, and 4 timers. 2.0-5.5V supply with Idle (5.8µA) and Sleep (0.1µA) modes. I suffix denotes industrial temp (-40 to 85°C), P suffix denotes PDIP-40. Classic 40-pin PIC for education and embedded control.

The PIC18F4520 uses a modified Harvard architecture with separate 16-bit program memory and 8-bit data memory buses. Most instructions execute in one or two cycles (4 clock cycles per instruction cycle). The 32KB Flash stores both program code and constant data. The 1536B SRAM includes access banks for fast context switching during interrupts. The enhanced CCP (Capture/Compare/PWM) modules provide 10-bit PWM resolution and can operate in half-bridge mode for motor control. The MSSP module supports SPI (master/slave) and I2C (multi-master) protocols. The EUSART supports asynchronous and synchronous serial communication with LIN 1.2 bus compatibility. The internal oscillator with 4xPLL provides up to 32MHz system clock from an 8MHz internal RC.

Grupo Pin Función Descripción
Potencia VDD, VSS, AVDD, AVSS Digital and analog supply
Restablecer MCLR# Master clear (reset, active low)
OSC OSC1, OSC2 External oscillator I/O
Port A RA0-RA5 6 I/O pins with ADC, comparator, VREF
Port B RB0-RB7 8 I/O pins with interrupt-on-change, CCP, SPI
Port C RC0-RC7 8 I/O pins with Timer1/2/3, CCP, USART, I2C
Port D RD0-RD7 8 I/O pins with parallel slave port
Port E RE0-RE2 3 I/O pins with ADC, PSP control
  • DC motor speed controller using 5 PWM outputs and ADC feedback
  • Industrial data logger with EUSART RS-232 and I2C EEPROM
  • Home automation controller with SPI radio and 13-channel sensor ADC
  • Automotive accessory controller with LIN bus communication
  • Educational microcontroller development board with PDIP-40 socket
Fabricante Número de pieza Paquete Notas
Microchip PIC18F4520-I/PT TQFP-44 SMD version with extra pins
Microchip PIC18F4550-I/P PDIP-40 USB 2.0 capable version
Microchip PIC18F4620-I/P PDIP-40 64KB Flash, larger memory upgrade
Recomendar piezas

KSZ8863RLL

3-port 10/100 managed Ethernet switch, 2x PHY + RMII, QoS/VLAN/RSTP, 48-LQFP

Marca:

Paquete:

48-LQFP (7x7mm)
En stock:
2500 unidades

Ciclo de carga: 3~7 días
El pedido mínimo es de 1

Ir a la consulta

PIC16F1823-E/SL

14-pin 8-bit MCU, 3.5KB Flash, 32MHz, 10-bit ADC, SPI/I2C/UART, XLP, SOIC-14, extended temp

Marca:

Paquete:

SOIC-14
En stock:
10200pcs

Ciclo de carga: 3~7 días
El pedido mínimo es de 1

Ir a la consulta

PIC32MZ2048EFM144-I/PL

32-bit MIPS MCU, 252MHz, 2MB Flash, 512KB RAM, HW FPU, Ethernet/CAN/USB, 144-LQFP

Marca:

Paquete:

144-LQFP (20x20mm)
En stock:
3200pcs

Ciclo de carga: 3~7 días
El pedido mínimo es de 1

Ir a la consulta

24AA512-I/SN

512Kb I2C EEPROM, 1MHz, 128B page, 1M cycles, 1.7-5.5V, SOIC-8 industrial

Marca:

Paquete:

SOIC-8 (3.90mm width)
En stock:
12800pcs

Ciclo de carga: 3~7 días
El pedido mínimo es de 1

Ir a la consulta

PIC10F322T-E/OT

8-bit PIC10 MCU, 16MHz, 896B Flash, 64B RAM, 8-bit ADC, NCO/CLC/CWG, SOT-23-6

Marca:

Paquete:

SOT-23-6
En stock:
8200pcs

Ciclo de carga: 3~7 días
El pedido mínimo es de 1

Ir a la consulta

PIC18F452-I/P

8-bit PIC18 MCU, 40MHz, 32KB Flash, 1.5KB RAM, 10-bit ADC, USART/SPI/I2C, PDIP-40

Marca:

Paquete:

PDIP-40
En stock:
3200pcs

Ciclo de carga: 3~7 días
El pedido mínimo es de 1

Ir a la consulta
Garantía de calidad

Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.

1. Authorized & Genuine Sourcing Promise

All of our electronic components are procured from official authorized distributors and original manufacturers. We strictly reject counterfeits, refurbished parts, disassembled components and gray-market goods. Every product is guaranteed to be brand-new original parts and fully consistent with the original technical parameters. For branded products such as NXP IC series, we maintain complete supply channel documents to realize full product traceability.

2. Strict Full-batch Quality Inspection

We implement 100% full-batch quality control for all goods before shipment. Our professional QC team conducts multi-dimensional tests including appearance inspection, electrical parameter testing, performance verification and packaging check. Each batch of components is attached with complete inspection reports and batch records. We stick to zero-tolerance standards for defective products to ensure every piece of component meets industrial application requirements.

3. Industry Standard Compliance

Our products comply with a variety of international industry quality standards to adapt to high-standard application scenarios:
  • Electrónica del automóvil: All automotive-grade components pass AEC-Q series certification, featuring excellent stability and durability to adapt to complex vehicle operating environments.
  • Productos sanitarios: High-reliability components meet medical industry safety and compliance regulations, ensuring stable operation for medical equipment.
  • Industrial Control & Consumer Electronics: Products conform to universal international electronic industry standards, suitable for long-term continuous operation of various equipment.

4. Professional Reliability Control

For static-sensitive, moisture-sensitive and precision components such as ICs, PCBs, sensors and connectors, we carry out reliability screening in advance. Combined with standardized ESD anti-static packaging and vacuum moisture-proof packaging, we avoid component damage caused by static electricity, dampness or collision during storage and transportation, and retain the original performance of products.

5. Traceability Management System

We establish a complete product traceability system. Each batch of goods corresponds to independent batch number, sourcing record, inspection record and delivery record. Customers can query the whole lifecycle information of components at any time. This system effectively solves quality risks and facilitates after-sales handling and production quality control for your company.

6. After-sales Quality Guarantee

If any product is confirmed to have non-conformity quality problems due to our reasons after receipt, we provide free return, exchange and supplementary delivery services. Our professional quality team will also conduct root cause analysis to optimize our quality control process. We respond to quality feedback within 24 hours to resolve your worries efficiently.

Póngase en contacto con nosotros

If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:

 

Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China

 

Envíos y pagos

Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.

1. Payment Terms

We offer a variety of secure and convenient payment methods to meet diverse business cooperation needs. Details are as follows:
  1. Accepted Payment Methods
  • T/T (Bank Wire Transfer): The primary settlement method for bulk orders and a widely used international payment channel.
  • PayPal: Ideal for small orders, sample orders and quick payments.

  1. Settlement Currency

     

    US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.

  2. Bank Charges

     

    All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.

  3. Payment Requirements
  • Sample and small orders: Shipment will be arranged upon full payment.
  • In-stock bulk orders: Goods will be delivered within 2 to 3 working days after full payment.

2. Shipping & Delivery

We partner with leading global logistics providers to ensure safe and fast delivery worldwide. Relevant details are listed below:
  1. Logistics Partners
  • International Express: DHL, FedEx, UPS, TNT
  • Economy Logistics: Air freight and sea freight for large-volume cargo
  • Domestic Delivery: SF Express, Yunda Express
  1. Order Processing Time
  • In-stock items: Orders confirmed and fully paid before 14:00 (GMT+8) will be shipped on the same day. All other orders will be dispatched within 1 to 2 working days.
  • Out-of-stock or sourced items: The delivery lead time will be confirmed separately according to brand and inventory status.
  1. Estimated Transit Time
  • International Express: 3 – 7 working days globally
  • Air Freight: 7 – 12 working days
  • Sea Freight: 25 – 40 working days for heavy and large bulk cargo
  1. Shipping Fee Rules
  • Shipping cost is calculated based on package weight, volume, destination and delivery method.
  • Both freight prepaid and freight collect are available. Please provide your courier account number in advance if you choose freight collect.
  • Free international express delivery is offered for large orders. Terms for long-term partners can be negotiated separately.
  1. Shipment Tracking
     

    Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.

3. General Order Rules & Notes

  1. MOQ & Sample Service

     

    We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.

  2. Packaging Standard

     

    All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.

4. Customs & Liability Statement

  1. Import Duties & Taxes

     

    All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.

  2. Handling of Lost or Damaged Goods
  • In case of loss or severe damage during transit, please contact us within 48 hours after receiving the tracking information. We will assist you in filing a claim with the logistics provider.
  • We shall not be liable for any losses caused by incorrect delivery address, wrong contact information or the buyer’s refusal to complete customs clearance.

5. Local Pickup in Shenzhen

Local pickup service is available for customers in Shenzhen and surrounding areas:
  • Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong Province, China
  • Business Hours: 09:00 – 18:00, Monday to Friday. Closed on weekends and official public holidays.
  • Notice: Please make an appointment via email or communication tools one day in advance, and present your order information upon pickup.

Contact Information

Email: info@materialparts.com

Tel / WhatsApp: +86 13760382860

Servicio y embalaje

Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.

Core Services

1. One-stop Sourcing & BOM Support

We specialize in a full range of passive and active electronic components, including SMD resistors, power resistors, connectors, aviation connectors, LED beads, flexible circuit boards, printed circuit boards, and integrated circuits. Our professional team provides BOM list consolidation, component matching, and alternative model recommendation services. We support sample orders, small-batch trial production, and mass production orders with flexible MOQs to meet diverse procurement needs.

2. Genuine Product Guarantee & Full-process Quality Inspection

All products are sourced from official authorized channels and are 100% original genuine parts. Every batch of goods undergoes strict full-process quality inspection before delivery, with complete batch records and traceability documents provided. Our products comply with AEC-Q standards for automotive electronics and high-reliability specifications for medical devices. We eliminate counterfeits, refurbished parts and defective products from the source to secure your project production.

3. Fast Quotation & Order Processing

Our customer service team responds promptly to inquiries and quotation requests. All in-stock orders will be processed within one working day. We provide stocking reservation services for long-term cooperative customers, effectively solving problems such as component shortages and unstable supply chains.

4. Professional Technical Support

Our senior engineer team provides free technical consultation, model selection guidance and original manufacturer datasheets. We assist customers in solving problems related to product R&D, circuit design and component application, providing reliable technical support for project progress.

5. Sourcing for Special Components

Relying on our global supply chain network, we professionally source scarce components, obsolete parts and customized special components to efficiently solve your procurement difficulties.

6. Global Logistics & Document Services

We cooperate with mainstream international logistics providers including DHL, FedEx, UPS and TNT to achieve fast global delivery. We can provide complete export documents such as customs declaration files, commercial invoices and packing lists to ensure smooth customs clearance for international shipments. Local pickup is also available for customers in Shenzhen, China.

Professional Packaging Standards

Electronic components are sensitive to static electricity, collision, moisture and dust. We adopt industry-standard anti-static packaging solutions to fully ensure the integrity of goods during transportation and storage.

1. General Packaging Specifications

  • All components are packed separately to avoid damage caused by friction and collision;
  • Shockproof buffer materials are added for fragile products to ensure transportation safety;
  • Each package is clearly marked with part number, quantity, batch number and specifications for easy inventory counting and management.

2. Classified Professional Packaging

  • Anti-static Packaging: Static-sensitive components such as chips, circuit boards and sensors are packaged with anti-static bags, shielding boxes and conductive foam in strict accordance with international anti-static standards to prevent static damage.
  • Vacuum Moisture-proof Packaging: Moisture-sensitive components are vacuum-sealed with desiccants to isolate humid air, suitable for ocean transportation and long-term storage.
  • Original Factory Packaging: Integrated circuits of brands such as NXP are delivered with original reels, trays or tubes by default, retaining complete original packaging and adapting to automated SMT production lines.
  • Discrete Device Packaging: Discrete devices such as SMD resistors, power resistors and LEDs are quantitatively and classifiedly packaged with accurate quantity and clear marking.
  • Connector / Aviation Connector Packaging: Hard outer packaging is adopted to prevent pin bending and structural deformation.

3. Custom Packaging Services

We provide value-added services including personalized packaging, custom labeling and re-reeling according to customer requirements, fully matching your production and warehouse management standards.

Contact Information

For service consultation or packaging customization, please feel free to contact us:
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
 

Online Inquiry Form

Support Excel, PDF, CSV format files for full BOM list quotation

Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.

Empresa
perspectivas
Industrias
Todos los productos
Circuitos integrados
Dispositivos C&I
Discreto
Chips de memoria
MPU y MCU