Home > Integrated Circuits ICs > CD4060BE

CD4060BE

14-stage binary counter with oscillator, 10 outputs, 3-15V, PDIP-16

9300

Effective Inventory
Go to Inquiry

Image for reference only

Manufacturer Part：

CD4060BE

Package：

PDIP-16 (19.3 x 6.35 x 4.57mm, 2.54mm pitch)

Brand：
Product Categories：
Quality Commitment
Shipping & Payment
Service & Packaging
Product Manual
Other recommendations you may be interested in.

SII9396SCNUC-BAR

302S43W472KV4E

IXTT10N100D2

IS25LP016D-JNLE-TR

IS25WP256D-JLLE

IS62WV51216BLL-55BLI

IS42S16160J-7TLI

IS43TR16256BL-125KBLI

Description

Product Overview

The CD4060BE is a 14-stage ripple carry binary counter/divider and oscillator from Texas Instruments with on-chip oscillator, 10 buffered outputs, and 3V to 15V supply in a 16-pin PDIP package.

Key Specifications

Counter Stages 14 (Q4-Q10, Q11-Q14 available)
Available Outputs 10 (Q4-Q14, divide by 16 to 16384)
Maximum Clock Frequency 8MHz at 10V, 3MHz at 5V
Supply Voltage 3V to 15V
Oscillator Type RC or crystal (built-in)
Input Current 1µA typical at 10V
Quiescent Current 5µA typical at 5V
Reset Input Active high (MR), clears all stages
Output Drive 1.3mA sink/source at 5V
Operating Temperature -55°C to +125°C
Package PDIP-16 (19.3 x 6.35mm)

Features

  • 14-stage binary ripple counter with on-chip oscillator
  • 10 buffered counter outputs (divide by 2^4 to 2^14)
  • Internal oscillator configurable as RC or crystal
  • Master reset (MR) clears all counter stages
  • Wide supply range: 3V to 15V
  • Very low quiescent current: 5µA at 5V
  • Military temperature range: -55°C to +125°C
  • Outputs Q1, Q2, Q3 not available externally

Applications

  • Long-duration timers and time delays
  • Frequency dividers and sub-clock generators
  • Crystal oscillator with divided outputs
  • LED flasher circuits (1Hz range)
  • Low-frequency clock generation

The CD4060BE from Texas Instruments is a 14-stage ripple carry binary counter with a built-in oscillator section. It combines a CMOS oscillator (configurable as RC or crystal) with a 14-bit binary counter, providing 10 buffered outputs at division ratios from 2^4 (16) to 2^14 (16384). The first three counter stages (Q1, Q2, Q3) are not externally accessible, meaning the lowest available division is 16. The internal oscillator requires only two external resistors and one capacitor for RC mode, or a 32.768kHz crystal with two capacitors for precision timing. The master reset (MR) pin clears all counter stages asynchronously. With a typical quiescent current of only 5µA at 5V and military temperature range, the CD4060 is ideal for battery-powered timing applications.

The CD4060BE consists of two sections: the oscillator and the binary counter. The oscillator section contains two inverters that can be configured as either an RC oscillator or a Pierce crystal oscillator. In RC mode, the oscillation frequency is approximately f = 1/(2.2 × R1 × C), where R1 is the series resistor and C is the timing capacitor. In crystal mode, a 32.768kHz crystal connected between pins 10 and 11 provides a precise timebase with two load capacitors. The oscillator output drives the first stage of the 14-bit ripple counter. Each counter stage divides by 2, creating outputs at f/2^n where n is the stage number. Since Q1, Q2, and Q3 are not pinned out, the available outputs start at Q4 (f/16) through Q14 (f/16384). With a 32.768kHz crystal, Q14 provides a precise 2Hz output. The counter advances on the negative-going edge of each stage. The master reset (MR) pin, when driven high, asynchronously resets all 14 counter stages to zero and disables the oscillator, stopping all outputs.

Pin Name Type Description
1 Q12 Output Counter output stage 12 (f/4096)
2 Q13 Output Counter output stage 13 (f/8192)
3 Q14 Output Counter output stage 14 (f/16384)
4 Q6 Output Counter output stage 6 (f/64)
5 Q5 Output Counter output stage 5 (f/32)
6 Q7 Output Counter output stage 7 (f/128)
7 Q4 Output Counter output stage 4 (f/16)
8 VSS Power Ground
9 Q8 Output Counter output stage 8 (f/256)
10 OSC1 Oscillator Oscillator input (crystal or RC)
11 OSC2 Oscillator Oscillator output (crystal or RC)
12 RS Oscillator Oscillator resistor connection
13 Q9 Output Counter output stage 9 (f/512)
14 Q10 Output Counter output stage 10 (f/1024)
15 MR Input Master reset (active high, clears all stages)
16 VDD Power Supply voltage (3V-15V)
  • Long-Delay Timers: 14-bit counter divides clock by up to 16384, creating delays from seconds to days with a single IC
  • LED Flashers: 32.768kHz crystal with Q14 output produces 2Hz flash rate; Q13 gives 4Hz, Q12 gives 8Hz
  • Sub-Clock Generation: Crystal oscillator divided outputs provide precise 1Hz, 2Hz, 4Hz reference clocks
  • Frequency Division: 10 outputs at binary division ratios replace multiple flip-flop divider stages
  • Battery-Powered Timers: 5µA quiescent current and 3V minimum supply enable long-running coin-cell timing circuits
Model Manufacturer Key Difference Package Voltage
CD4060BM TI SOIC-16 surface-mount version with identical oscillator and counter functions SOIC-16 3-18V
HEF4060BT NXP Pin-compatible CMOS version with improved ESD protection and wider temperature range SOIC-16 3-15V
MC14060BDR2G onsemi Pin-compatible equivalent with RoHS compliance and automotive-grade screening available SOIC-16 3-18V
74HC4060D NXP HC CMOS version with 2-6V supply and higher speed oscillator (60MHz vs 6MHz at 5V) SOIC-16 2-6V
74VHC4060M onsemi VHC version with 2-6V supply, very high speed and low power consumption SOIC-16 2-6V
74HCT4060D NXP HCT version with TTL-compatible input levels for mixed 5V/3.3V logic systems SOIC-16 4.5-5.5V

The CD4060BE combines a 14-stage ripple-carry binary counter with an internal oscillator (requires external RC or crystal). HC/VHC versions offer significantly higher oscillator frequency but narrower voltage range. DIP-16 through-hole versions use the BE suffix (TI) or BT suffix (NXP).

Recommend Parts

SII9396SCNUC-BAR

HDMI 2.0 Bridge, 4K@60Hz, HDCP 2.2 Repeater, MHL 3.0, 76-pin QFN EP

Brand:

Package:

76-Pin QFN EP (9.0 x 9.0 x 0.83 mm)
In stock:
6848pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

302S43W472KV4E

4700pF 3000V X7R MLCC, 10%, 1812, high-voltage TANCERAM, -55 to 125C, tape and reel

Brand:

Package:

1812 (4.50 x 3.18 x 2.80 mm)
In stock:
4146pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

IXTT10N100D2

N-Channel depletion-mode MOSFET, 1000V, 10A, 1.5Ohm, normally-on, TO-268AA, 695W

Brand:

Package:

TO-268AA / D3PAK (15.75 x 13.08 x 4.83 mm)
In stock:
14959pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

IS25LP016D-JNLE-TR

16Mbit SPI NOR Flash, 3V, QSPI/QPI, 133MHz, DTR, SOIC-8 150mil, -40 to 105C, TR

Brand:

Package:

8-SOIC (4.90 x 3.90 x 1.75 mm, 150mil)
In stock:
11082pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

IS25WP256D-JLLE

256Mbit SPI NOR Flash, 1.8V, QPI/QSPI, 104MHz, DTR, WSON-8 6x8mm, -40 to 105C

Brand:

Package:

8-WSON (6.0 x 8.0 x 0.73 mm, exposed pad)
In stock:
13368pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry

IS62WV51216BLL-55BLI

8Mbit async SRAM, 512Kx16, 2.5-3.6V, 55ns, ultra-low power, 48-mini BGA, Industrial

Brand:

Package:

48-Mini BGA (7.2 x 8.7 x 0.9 mm)
In stock:
3838pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
Quality Assurance

Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.

1. Authorized & Genuine Sourcing Promise

All of our electronic components are procured from official authorized distributors and original manufacturers. We strictly reject counterfeits, refurbished parts, disassembled components and gray-market goods. Every product is guaranteed to be brand-new original parts and fully consistent with the original technical parameters. For branded products such as NXP IC series, we maintain complete supply channel documents to realize full product traceability.

2. Strict Full-batch Quality Inspection

We implement 100% full-batch quality control for all goods before shipment. Our professional QC team conducts multi-dimensional tests including appearance inspection, electrical parameter testing, performance verification and packaging check. Each batch of components is attached with complete inspection reports and batch records. We stick to zero-tolerance standards for defective products to ensure every piece of component meets industrial application requirements.

3. Industry Standard Compliance

Our products comply with a variety of international industry quality standards to adapt to high-standard application scenarios:
  • Automotive Electronics: All automotive-grade components pass AEC-Q series certification, featuring excellent stability and durability to adapt to complex vehicle operating environments.
  • Medical Devices: High-reliability components meet medical industry safety and compliance regulations, ensuring stable operation for medical equipment.
  • Industrial Control & Consumer Electronics: Products conform to universal international electronic industry standards, suitable for long-term continuous operation of various equipment.

4. Professional Reliability Control

For static-sensitive, moisture-sensitive and precision components such as ICs, PCBs, sensors and connectors, we carry out reliability screening in advance. Combined with standardized ESD anti-static packaging and vacuum moisture-proof packaging, we avoid component damage caused by static electricity, dampness or collision during storage and transportation, and retain the original performance of products.

5. Traceability Management System

We establish a complete product traceability system. Each batch of goods corresponds to independent batch number, sourcing record, inspection record and delivery record. Customers can query the whole lifecycle information of components at any time. This system effectively solves quality risks and facilitates after-sales handling and production quality control for your company.

6. After-sales Quality Guarantee

If any product is confirmed to have non-conformity quality problems due to our reasons after receipt, we provide free return, exchange and supplementary delivery services. Our professional quality team will also conduct root cause analysis to optimize our quality control process. We respond to quality feedback within 24 hours to resolve your worries efficiently.

Contact Us

If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:

 

Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China

 

Shipping & Payment

Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.

1. Payment Terms

We offer a variety of secure and convenient payment methods to meet diverse business cooperation needs. Details are as follows:
  1. Accepted Payment Methods
  • T/T (Bank Wire Transfer): The primary settlement method for bulk orders and a widely used international payment channel.
  • PayPal: Ideal for small orders, sample orders and quick payments.

  1. Settlement Currency

     

    US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.

  2. Bank Charges

     

    All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.

  3. Payment Requirements
  • Sample and small orders: Shipment will be arranged upon full payment.
  • In-stock bulk orders: Goods will be delivered within 2 to 3 working days after full payment.

2. Shipping & Delivery

We partner with leading global logistics providers to ensure safe and fast delivery worldwide. Relevant details are listed below:
  1. Logistics Partners
  • International Express: DHL, FedEx, UPS, TNT
  • Economy Logistics: Air freight and sea freight for large-volume cargo
  • Domestic Delivery: SF Express, Yunda Express
  1. Order Processing Time
  • In-stock items: Orders confirmed and fully paid before 14:00 (GMT+8) will be shipped on the same day. All other orders will be dispatched within 1 to 2 working days.
  • Out-of-stock or sourced items: The delivery lead time will be confirmed separately according to brand and inventory status.
  1. Estimated Transit Time
  • International Express: 3 – 7 working days globally
  • Air Freight: 7 – 12 working days
  • Sea Freight: 25 – 40 working days for heavy and large bulk cargo
  1. Shipping Fee Rules
  • Shipping cost is calculated based on package weight, volume, destination and delivery method.
  • Both freight prepaid and freight collect are available. Please provide your courier account number in advance if you choose freight collect.
  • Free international express delivery is offered for large orders. Terms for long-term partners can be negotiated separately.
  1. Shipment Tracking
     

    Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.

3. General Order Rules & Notes

  1. MOQ & Sample Service

     

    We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.

  2. Packaging Standard

     

    All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.

4. Customs & Liability Statement

  1. Import Duties & Taxes

     

    All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.

  2. Handling of Lost or Damaged Goods
  • In case of loss or severe damage during transit, please contact us within 48 hours after receiving the tracking information. We will assist you in filing a claim with the logistics provider.
  • We shall not be liable for any losses caused by incorrect delivery address, wrong contact information or the buyer’s refusal to complete customs clearance.

5. Local Pickup in Shenzhen

Local pickup service is available for customers in Shenzhen and surrounding areas:
  • Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong Province, China
  • Business Hours: 09:00 – 18:00, Monday to Friday. Closed on weekends and official public holidays.
  • Notice: Please make an appointment via email or communication tools one day in advance, and present your order information upon pickup.

Contact Information

Email: info@materialparts.com

Tel / WhatsApp: +86 13760382860

Service & Packaging

Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.

Core Services

1. One-stop Sourcing & BOM Support

We specialize in a full range of passive and active electronic components, including SMD resistors, power resistors, connectors, aviation connectors, LED beads, flexible circuit boards, printed circuit boards, and integrated circuits. Our professional team provides BOM list consolidation, component matching, and alternative model recommendation services. We support sample orders, small-batch trial production, and mass production orders with flexible MOQs to meet diverse procurement needs.

2. Genuine Product Guarantee & Full-process Quality Inspection

All products are sourced from official authorized channels and are 100% original genuine parts. Every batch of goods undergoes strict full-process quality inspection before delivery, with complete batch records and traceability documents provided. Our products comply with AEC-Q standards for automotive electronics and high-reliability specifications for medical devices. We eliminate counterfeits, refurbished parts and defective products from the source to secure your project production.

3. Fast Quotation & Order Processing

Our customer service team responds promptly to inquiries and quotation requests. All in-stock orders will be processed within one working day. We provide stocking reservation services for long-term cooperative customers, effectively solving problems such as component shortages and unstable supply chains.

4. Professional Technical Support

Our senior engineer team provides free technical consultation, model selection guidance and original manufacturer datasheets. We assist customers in solving problems related to product R&D, circuit design and component application, providing reliable technical support for project progress.

5. Sourcing for Special Components

Relying on our global supply chain network, we professionally source scarce components, obsolete parts and customized special components to efficiently solve your procurement difficulties.

6. Global Logistics & Document Services

We cooperate with mainstream international logistics providers including DHL, FedEx, UPS and TNT to achieve fast global delivery. We can provide complete export documents such as customs declaration files, commercial invoices and packing lists to ensure smooth customs clearance for international shipments. Local pickup is also available for customers in Shenzhen, China.

Professional Packaging Standards

Electronic components are sensitive to static electricity, collision, moisture and dust. We adopt industry-standard anti-static packaging solutions to fully ensure the integrity of goods during transportation and storage.

1. General Packaging Specifications

  • All components are packed separately to avoid damage caused by friction and collision;
  • Shockproof buffer materials are added for fragile products to ensure transportation safety;
  • Each package is clearly marked with part number, quantity, batch number and specifications for easy inventory counting and management.

2. Classified Professional Packaging

  • Anti-static Packaging: Static-sensitive components such as chips, circuit boards and sensors are packaged with anti-static bags, shielding boxes and conductive foam in strict accordance with international anti-static standards to prevent static damage.
  • Vacuum Moisture-proof Packaging: Moisture-sensitive components are vacuum-sealed with desiccants to isolate humid air, suitable for ocean transportation and long-term storage.
  • Original Factory Packaging: Integrated circuits of brands such as NXP are delivered with original reels, trays or tubes by default, retaining complete original packaging and adapting to automated SMT production lines.
  • Discrete Device Packaging: Discrete devices such as SMD resistors, power resistors and LEDs are quantitatively and classifiedly packaged with accurate quantity and clear marking.
  • Connector / Aviation Connector Packaging: Hard outer packaging is adopted to prevent pin bending and structural deformation.

3. Custom Packaging Services

We provide value-added services including personalized packaging, custom labeling and re-reeling according to customer requirements, fully matching your production and warehouse management standards.

Contact Information

For service consultation or packaging customization, please feel free to contact us:
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
 

Online Inquiry Form

Support Excel, PDF, CSV format files for full BOM list quotation

Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.

Company
insights
Industries
All Products
Integrated Circuits
C&I Devices
Discrete
Memory Chips
MPUs & MCUs