الصفحة الرئيسية > الدوائر المتكاملة الدوائر المتكاملة > SN74LS74AN

SN74LS74AN

Dual D flip-flop, LS TTL, preset/clear, 25MHz, PDIP-14

6000

المخزون الفعال

انتقل إلى الاستفسار

Image for reference only

جزء الشركة المصنعة ： جزء الشركة المصنعة

SN74LS74AN

الحزمة ： الحزمة

PDIP-14 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

العلامة التجارية ： العلامة التجارية

فئات المنتجات:：فئات المنتجات

الدوائر المتكاملة الدوائر المتكاملة, واجهة ICs

توصيات أخرى قد تكون مهتماً بها.

SII9396SCNUC-BAR

IS43TR16256BL-125KBLI

الوصف

نظرة عامة على المنتج

The SN74LS74AN from Texas Instruments contains two independent D-type positive-edge-triggered flip-flops with complementary outputs, direct preset and clear — the TTL counterpart of the CD4013 for 5V systems in a 14-pin PDIP package.

المواصفات الرئيسية

Number of Flip-Flops	2 (dual, independent)
عائلة المنطق	LS (Low-power Schottky)
Trigger Type	Positive-edge (rising edge of CLK)
جهد الإمداد	4.75V to 5.25V
الحد الأقصى لتردد الساعة	25MHz typical
Preset (PRE)	Active-LOW (asynchronous, sets Q=1)
Clear (CLR)	Active-LOW (asynchronous, sets Q=0)
Setup Time	10ns typical
تأخير الانتشار	13–25ns (CLK to Q)
درجة حرارة التشغيل	0°C to +70°C
الحزمة	PDIP-14 (19.3 x 6.35mm)

الميزات

Dual D-type flip-flops, positive-edge triggered
Asynchronous preset and clear (active-LOW)
Complementary outputs (Q and NOT-Q)
25MHz clock frequency
Industry-standard 7474 pinout

التطبيقات

Data register / latch
Frequency divider (toggle mode)
Switch debounce
Sync logic in digital systems

مقدمة المنتج:SN74LS74AN مقدمة المنتج

The SN74LS74AN from Texas Instruments contains two independent D-type positive-edge-triggered flip-flops with direct preset (PRE, active-LOW) and clear (CLR, active-LOW). On each rising edge of the clock, the D input is captured and appears at the Q output. The asynchronous preset (PRE=LOW) forces Q=1 regardless of CLK and D; the asynchronous clear (CLR=LOW) forces Q=0. The 7474 is the TTL counterpart of the CMOS CD4013, with active-LOW (rather than active-HIGH) preset and clear. This is the most commonly used flip-flop in TTL systems for data registers, frequency dividers, and synchronization logic. In toggle mode (NOT-Q connected to D), each flip-flop divides the clock frequency by 2. Two flip-flops in one package can divide by 4, or store 2 bits of data. The 25MHz clock frequency supports medium-speed digital systems. The A suffix denotes the improved LS version; the N suffix denotes the PDIP-14 through-hole package.

مبدأ العمل:SN74LS74AN مبدأ العمل

Each D flip-flop in the SN74LS74AN captures the D input on the rising edge of CLK and holds it at Q until the next rising edge. Truth table: CLK rising edge with D=0 → Q=0; D=1 → Q=1. When CLK is not rising, Q holds regardless of D. The asynchronous inputs override: PRE=LOW forces Q=1; CLR=LOW forces Q=0. Both PRE and CLR are active-LOW (unlike CD4013’s active-HIGH S and R). For normal operation, both PRE and CLR must be HIGH. If both PRE and CLR are simultaneously LOW, both Q and NOT-Q go HIGH (invalid); the final state after both are released is indeterminate. For toggle mode: NOT-Q → D; each rising clock edge toggles Q; Q frequency = CLK/2. Two 7474 flip-flops cascade: Q1 → D2, NOT-Q1 → D1, shared clock = divide-by-4. For data storage: parallel data on D1 and D2; CLK rising edge captures both bits simultaneously. The 10ns setup time means D must be stable at least 10ns before the clock edge.

وصف الدبوس:SN74LS74AN تعريف الدبوس ووظائفه

دبوس	الاسم	النوع	الوصف
1	1CLR	المدخلات	Flip-flop 1 clear (active LOW, sets Q=0)
2	1D	المدخلات	Flip-flop 1 data input
3	1CLK	المدخلات	Flip-flop 1 clock (rising edge)
4	1PRE	المدخلات	Flip-flop 1 preset (active LOW, sets Q=1)
5	1Q	المخرجات	Flip-flop 1 Q output
6	1NOT-Q	المخرجات	Flip-flop 1 complementary output
7	GND	الطاقة	أرضي
8	2NOT-Q	المخرجات	Flip-flop 2 complementary output
9	2Q	المخرجات	Flip-flop 2 Q output
10	2PRE	المدخلات	Flip-flop 2 preset (active LOW)
11	2CLK	المدخلات	Flip-flop 2 clock (rising edge)
12	2D	المدخلات	Flip-flop 2 data input
13	2CLR	المدخلات	Flip-flop 2 clear (active LOW)
14	VCC	الطاقة	Supply (5V)

Application Scenarios:In which products and applications isSN74LS74AN مستعمل

Toggle / Divide-by-2: 1NOT-Q → 1D; clock on 1CLK; 1Q = clock/2; 2NOT-Q → 2D; 1Q → 2CLK; 2Q = clock/4
2-Bit Register: Data on 1D and 2D; shared CLK rising edge captures both bits; PRE and CLR tied HIGH for normal operation
Sync Logic: Asynchronous input → D1; system clock → CLK; Q1 = synchronized version of input; eliminates metastability
One-Shot: D tied HIGH; trigger on CLR (LOW pulse); CLK free-running; one clock-wide pulse on Q after CLR released

Alternative Models:What chips are recommended as replacements for SN74LS74AN

الطراز	الشركة المصنعة	الفرق الرئيسي	الحزمة	Supply
74LS74N	TI/Nexperia	Original TTL version with 5V-only supply, typical propagation delay 10-15ns	DIP-14	5V TTL
74LS74D	TI/Nexperia	Surface-mount SOIC version of LS with identical logic function	SOIC-14	5V TTL
74HC74D	TI/Nexperia	CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity	SOIC-14	2-6V CMOS
74HC74N	TI/Nexperia	Through-hole DIP version of HC family for prototyping and repair	DIP-14	2-6V CMOS
74HCT74D	TI/Nexperia	CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V	SOIC-14	4.5-5.5V TTL-in
74HCT74N	TI/Nexperia	Through-hole DIP version of HCT family for prototyping and repair	DIP-14	4.5-5.5V TTL-in
74AC74D	TI/Nexperia	Advanced CMOS with 2-6V supply and higher output drive current (24mA vs 6mA for HC)	SOIC-14	2-6V CMOS
74AC74N	TI/Nexperia	Through-hole DIP version of AC family for prototyping and repair	DIP-14	2-6V CMOS
74LVC74D	TI/Nexperia	Low-voltage CMOS for 1.65-3.6V modern logic with 24mA output drive and bus-hold inputs	SOIC-14	1.65-3.6V CMOS
74LVC74N	TI/Nexperia	Through-hole DIP version of LVC family for prototyping and repair	DIP-14	1.65-3.6V CMOS

The 7474 is a Dual D-Type Positive-Edge-Triggered Flip-Flop. Family variants span from the original LS TTL (5V only) to modern LVC/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.