الصفحة الرئيسية > الدوائر المتكاملة الدوائر المتكاملة > SN74HC541N

SN74HC541N

Octal buffer/driver, 3-state, 2 OE pins, HC CMOS 2-6V, PDIP-20

9500

المخزون الفعال
انتقل إلى الاستفسار

Image for reference only

جزء الشركة المصنعة ： جزء الشركة المصنعة

SN74HC541N

الحزمة ： الحزمة

PDIP-20 (24.33 x 6.35 x 5.08mm, 2.54mm pitch, through-hole)

العلامة التجارية ： العلامة التجارية
فئات المنتجات:：فئات المنتجات
الالتزام بالجودة
الشحن والدفع
الخدمة والتغليف
دليل المنتج
توصيات أخرى قد تكون مهتماً بها.

SII9396SCNUC-BAR

302S43W472KV4E

IXTT10N100D2

IS25LP016D-JNLE-TR

IS25WP256D-JLLE

IS62WV51216BLL-55BLI

IS42S16160J-7TLI

IS43TR16256BL-125KBLI

الوصف

نظرة عامة على المنتج

The SN74HC541N is an octal buffer/line driver with 3-state outputs from Texas Instruments, featuring output enable and HC CMOS technology in a 20-pin PDIP package.

المواصفات الرئيسية

عدد القنوات 8 (octal buffer)
عائلة المنطق HC (High-speed CMOS)
جهد الإمداد 2V to 6V
نوع الإخراج 3-state (high-impedance when disabled)
Output Enable 2 active-low OE pins (OE1, OE2)
تأخير الانتشار 18ns max at 5V
Output Drive ±6mA at 5V
نوع الإدخال CMOS قياسي
القطبية Non-inverting
درجة حرارة التشغيل -40 درجة مئوية إلى +85 درجة مئوية
الحزمة PDIP-20 (24.33 x 6.35mm)

الميزات

  • 8-bit non-inverting buffer with 3-state outputs
  • Dual active-low output enable (both must be low to enable)
  • Wide 2V to 6V operating voltage
  • High-impedance outputs when disabled
  • HC CMOS low power consumption
  • Directly drives bus lines
  • Suitable for driving heavy capacitive loads

التطبيقات

  • Bus driver and buffer
  • Memory address driver
  • Clock driver and buffer
  • Microprocessor I/O port isolation
  • General-purpose logic buffer

The SN74HC541N from Texas Instruments is an octal buffer and line driver with 3-state outputs and dual active-low output enable pins in a 20-pin PDIP through-hole package. The device provides non-inverting buffering of 8 data lines. The two output enable pins (OE1 and OE2) are both active-low; both must be low to enable the outputs. When either OE pin is high, all outputs enter the high-impedance state, allowing connection to shared bus lines. The HC (High-speed CMOS) technology provides 2V to 6V operating voltage range with low quiescent current. The ±6mA output drive at 5V can drive moderate capacitive loads on bus lines. The N suffix denotes the PDIP-20 through-hole package.

The SN74HC541N contains eight identical non-inverting buffer elements with a common output enable control. Each buffer passes the input signal to the output without inversion. The output enable logic ANDs the two active-low OE pins: when both OE1 and OE2 are low, the outputs follow the inputs (after the propagation delay). When either OE1 or OE2 is high, all eight outputs enter the high-impedance (3-state) state, effectively disconnecting the buffer from the bus. This allows multiple buffers to share a common bus without contention, as only one buffer is enabled at a time. The non-inverting nature preserves the original signal polarity, making the device suitable for address and data bus buffering where signal integrity must be maintained.

دبوس الاسم النوع الوصف
1 OE1 المدخلات Output enable 1 (active low)
2-9 1A-8A المدخلات Data inputs (8 bits)
10 GND الطاقة أرضي
11-18 8Y-1Y المخرجات Data outputs (8 bits, 3-state)
19 OE2 المدخلات Output enable 2 (active low)
20 VCC الطاقة Supply (2V to 6V)

SN74HC541N uses the PDIP-20 package: VCC at Pin 20, GND at Pin 10. Eight non-inverting buffer/line drivers: inputs on Pins 2-9, outputs on Pins 18-11. Two active-low output enable controls: OE1=Pin 1, OE2=Pin 19. Both enables must be LOW for outputs to be active; either enable HIGH forces all outputs to high impedance. The dual-enable architecture allows simple expansion to wider bus widths. Unlike the 74HC245 transceiver, the 541 is unidirectional (input to output only) with 3-state outputs. Output drive capability is ±6mA at 5V. For bidirectional version, use SN74HC245N. For inverting buffer, use SN74HC540N (same pinout, inverted outputs).

  • Bus Driving: 3-state outputs connect to shared address/data buses; dual OE allows independent enable from two controllers
  • Memory Interface: Drives memory address lines with sufficient fan-out for multiple memory chips
  • Clock Buffer:

    Non-inverting buffer distributes clock signals without phase inversion

  • I/O Isolation: High-impedance mode isolates MCU pins from bus during reset or debug
  • Logic Level: 2V-6V range bridges between 3.3V and 5V systems (check VCC compatibility)
الطراز الشركة المصنعة الفرق الرئيسي الحزمة Supply
74HC541D TI/Nexperia CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity SOIC-20 2-6V CMOS
74HC541N TI/Nexperia Through-hole DIP version of HC family for prototyping and repair DIP-20 2-6V CMOS
74HCT541D TI/Nexperia CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V SOIC-20 4.5-5.5V TTL-in
74HCT541N TI/Nexperia Through-hole DIP version of HCT family for prototyping and repair DIP-20 4.5-5.5V TTL-in
74LVC541D TI/Nexperia Low-voltage CMOS for 1.65-3.6V modern logic with 24mA output drive and bus-hold inputs SOIC-20 1.65-3.6V CMOS
74LVC541N TI/Nexperia Through-hole DIP version of LVC family for prototyping and repair DIP-20 1.65-3.6V CMOS

The 74541 is a Octal Buffer/Driver with 3-State Output. Family variants span from the original LS TTL (5V only) to modern LVC/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.

قطع الغيار الموصى بها

SII9396SCNUC-BAR

HDMI 2.0 Bridge, 4K@60Hz, HDCP 2.2 Repeater, MHL 3.0, 76-pin QFN EP

العلامة التجارية:

الحزمة:

76-Pin QFN EP (9.0 x 9.0 x 0.83 mm)
متوفر في المخزون:
6848pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

302S43W472KV4E

4700pF 3000V X7R MLCC, 10%, 1812, high-voltage TANCERAM, -55 to 125C, tape and reel

العلامة التجارية:

الحزمة:

1812 (4.50 x 3.18 x 2.80 mm)
متوفر في المخزون:
4146pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

IXTT10N100D2

N-Channel depletion-mode MOSFET, 1000V, 10A, 1.5Ohm, normally-on, TO-268AA, 695W

العلامة التجارية:

الحزمة:

TO-268AA / D3PAK (15.75 x 13.08 x 4.83 mm)
متوفر في المخزون:
14959pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

IS25LP016D-JNLE-TR

16Mbit SPI NOR Flash, 3V, QSPI/QPI, 133MHz, DTR, SOIC-8 150mil, -40 to 105C, TR

العلامة التجارية:

الحزمة:

8-SOIC (4.90 x 3.90 x 1.75 mm, 150mil)
متوفر في المخزون:
11082pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

IS25WP256D-JLLE

256Mbit SPI NOR Flash, 1.8V, QPI/QSPI, 104MHz, DTR, WSON-8 6x8mm, -40 to 105C

العلامة التجارية:

الحزمة:

8-WSON (6.0 x 8.0 x 0.73 mm, exposed pad)
متوفر في المخزون:
13368pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

IS62WV51216BLL-55BLI

8Mbit async SRAM, 512Kx16, 2.5-3.6V, 55ns, ultra-low power, 48-mini BGA, Industrial

العلامة التجارية:

الحزمة:

48-Mini BGA (7.2 x 8.7 x 0.9 mm)
متوفر في المخزون:
3838pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار
ضمان الجودة

Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.

1. Authorized & Genuine Sourcing Promise

All of our electronic components are procured from official authorized distributors and original manufacturers. We strictly reject counterfeits, refurbished parts, disassembled components and gray-market goods. Every product is guaranteed to be brand-new original parts and fully consistent with the original technical parameters. For branded products such as NXP IC series, we maintain complete supply channel documents to realize full product traceability.

2. Strict Full-batch Quality Inspection

We implement 100% full-batch quality control for all goods before shipment. Our professional QC team conducts multi-dimensional tests including appearance inspection, electrical parameter testing, performance verification and packaging check. Each batch of components is attached with complete inspection reports and batch records. We stick to zero-tolerance standards for defective products to ensure every piece of component meets industrial application requirements.

3. Industry Standard Compliance

Our products comply with a variety of international industry quality standards to adapt to high-standard application scenarios:
  • إلكترونيات السيارات: All automotive-grade components pass AEC-Q series certification, featuring excellent stability and durability to adapt to complex vehicle operating environments.
  • الأجهزة الطبية: High-reliability components meet medical industry safety and compliance regulations, ensuring stable operation for medical equipment.
  • Industrial Control & Consumer Electronics: Products conform to universal international electronic industry standards, suitable for long-term continuous operation of various equipment.

4. Professional Reliability Control

For static-sensitive, moisture-sensitive and precision components such as ICs, PCBs, sensors and connectors, we carry out reliability screening in advance. Combined with standardized ESD anti-static packaging and vacuum moisture-proof packaging, we avoid component damage caused by static electricity, dampness or collision during storage and transportation, and retain the original performance of products.

5. Traceability Management System

We establish a complete product traceability system. Each batch of goods corresponds to independent batch number, sourcing record, inspection record and delivery record. Customers can query the whole lifecycle information of components at any time. This system effectively solves quality risks and facilitates after-sales handling and production quality control for your company.

6. After-sales Quality Guarantee

If any product is confirmed to have non-conformity quality problems due to our reasons after receipt, we provide free return, exchange and supplementary delivery services. Our professional quality team will also conduct root cause analysis to optimize our quality control process. We respond to quality feedback within 24 hours to resolve your worries efficiently.

اتصل بنا

If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:

 

Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China

 

الشحن والدفع

Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.

1. Payment Terms

We offer a variety of secure and convenient payment methods to meet diverse business cooperation needs. Details are as follows:
  1. Accepted Payment Methods
  • T/T (Bank Wire Transfer): The primary settlement method for bulk orders and a widely used international payment channel.
  • PayPal: Ideal for small orders, sample orders and quick payments.

  1. Settlement Currency

     

    US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.

  2. Bank Charges

     

    All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.

  3. Payment Requirements
  • Sample and small orders: Shipment will be arranged upon full payment.
  • In-stock bulk orders: Goods will be delivered within 2 to 3 working days after full payment.

2. Shipping & Delivery

We partner with leading global logistics providers to ensure safe and fast delivery worldwide. Relevant details are listed below:
  1. Logistics Partners
  • International Express: DHL, FedEx, UPS, TNT
  • Economy Logistics: Air freight and sea freight for large-volume cargo
  • Domestic Delivery: SF Express, Yunda Express
  1. Order Processing Time
  • In-stock items: Orders confirmed and fully paid before 14:00 (GMT+8) will be shipped on the same day. All other orders will be dispatched within 1 to 2 working days.
  • Out-of-stock or sourced items: The delivery lead time will be confirmed separately according to brand and inventory status.
  1. Estimated Transit Time
  • International Express: 3 – 7 working days globally
  • Air Freight: 7 – 12 working days
  • Sea Freight: 25 – 40 working days for heavy and large bulk cargo
  1. Shipping Fee Rules
  • Shipping cost is calculated based on package weight, volume, destination and delivery method.
  • Both freight prepaid and freight collect are available. Please provide your courier account number in advance if you choose freight collect.
  • Free international express delivery is offered for large orders. Terms for long-term partners can be negotiated separately.
  1. Shipment Tracking
     

    Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.

3. General Order Rules & Notes

  1. MOQ & Sample Service

     

    We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.

  2. Packaging Standard

     

    All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.

4. Customs & Liability Statement

  1. Import Duties & Taxes

     

    All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.

  2. Handling of Lost or Damaged Goods
  • In case of loss or severe damage during transit, please contact us within 48 hours after receiving the tracking information. We will assist you in filing a claim with the logistics provider.
  • We shall not be liable for any losses caused by incorrect delivery address, wrong contact information or the buyer’s refusal to complete customs clearance.

5. Local Pickup in Shenzhen

Local pickup service is available for customers in Shenzhen and surrounding areas:
  • Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong Province, China
  • Business Hours: 09:00 – 18:00, Monday to Friday. Closed on weekends and official public holidays.
  • Notice: Please make an appointment via email or communication tools one day in advance, and present your order information upon pickup.

Contact Information

Email: info@materialparts.com

Tel / WhatsApp: +86 13760382860

الخدمة والتغليف

Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.

Core Services

1. One-stop Sourcing & BOM Support

We specialize in a full range of passive and active electronic components, including SMD resistors, power resistors, connectors, aviation connectors, LED beads, flexible circuit boards, printed circuit boards, and integrated circuits. Our professional team provides BOM list consolidation, component matching, and alternative model recommendation services. We support sample orders, small-batch trial production, and mass production orders with flexible MOQs to meet diverse procurement needs.

2. Genuine Product Guarantee & Full-process Quality Inspection

All products are sourced from official authorized channels and are 100% original genuine parts. Every batch of goods undergoes strict full-process quality inspection before delivery, with complete batch records and traceability documents provided. Our products comply with AEC-Q standards for automotive electronics and high-reliability specifications for medical devices. We eliminate counterfeits, refurbished parts and defective products from the source to secure your project production.

3. Fast Quotation & Order Processing

Our customer service team responds promptly to inquiries and quotation requests. All in-stock orders will be processed within one working day. We provide stocking reservation services for long-term cooperative customers, effectively solving problems such as component shortages and unstable supply chains.

4. Professional Technical Support

Our senior engineer team provides free technical consultation, model selection guidance and original manufacturer datasheets. We assist customers in solving problems related to product R&D, circuit design and component application, providing reliable technical support for project progress.

5. Sourcing for Special Components

Relying on our global supply chain network, we professionally source scarce components, obsolete parts and customized special components to efficiently solve your procurement difficulties.

6. Global Logistics & Document Services

We cooperate with mainstream international logistics providers including DHL, FedEx, UPS and TNT to achieve fast global delivery. We can provide complete export documents such as customs declaration files, commercial invoices and packing lists to ensure smooth customs clearance for international shipments. Local pickup is also available for customers in Shenzhen, China.

Professional Packaging Standards

Electronic components are sensitive to static electricity, collision, moisture and dust. We adopt industry-standard anti-static packaging solutions to fully ensure the integrity of goods during transportation and storage.

1. General Packaging Specifications

  • All components are packed separately to avoid damage caused by friction and collision;
  • Shockproof buffer materials are added for fragile products to ensure transportation safety;
  • Each package is clearly marked with part number, quantity, batch number and specifications for easy inventory counting and management.

2. Classified Professional Packaging

  • Anti-static Packaging: Static-sensitive components such as chips, circuit boards and sensors are packaged with anti-static bags, shielding boxes and conductive foam in strict accordance with international anti-static standards to prevent static damage.
  • Vacuum Moisture-proof Packaging: Moisture-sensitive components are vacuum-sealed with desiccants to isolate humid air, suitable for ocean transportation and long-term storage.
  • Original Factory Packaging: Integrated circuits of brands such as NXP are delivered with original reels, trays or tubes by default, retaining complete original packaging and adapting to automated SMT production lines.
  • Discrete Device Packaging: Discrete devices such as SMD resistors, power resistors and LEDs are quantitatively and classifiedly packaged with accurate quantity and clear marking.
  • Connector / Aviation Connector Packaging: Hard outer packaging is adopted to prevent pin bending and structural deformation.

3. Custom Packaging Services

We provide value-added services including personalized packaging, custom labeling and re-reeling according to customer requirements, fully matching your production and warehouse management standards.

Contact Information

For service consultation or packaging customization, please feel free to contact us:
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
 

Online Inquiry Form

Support Excel, PDF, CSV format files for full BOM list quotation

Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.

الشركة
الرؤى
الصناعات
جميع المنتجات
الدوائر المتكاملة
أجهزة C&I
منفصلة
رقائق الذاكرة
وحدات MPUs و MCUs