Image for reference only
MTFC8GAKAJCN-1M-WT
BGA-153 (11.5x13mm)
The MTFC8GAKAJCN-1M-WT from Micron is an 8GB eMMC 5.1 embedded storage device in 153-ball BGA for mobile and IoT applications requiring high-density flash storage.
| الحزمة | BGA-153 (11.5x13mm) |
The MTFC8GAKAJCN-1M-WT from Micron is an 8GB eMMC 5.1 embedded storage device in 153-ball BGA for mobile and IoT applications requiring high-density flash storage.
The MTFC8GAKAJCN-1M-WT is an 8GB eMMC 5.1 embedded flash storage device from Micron in a 153-ball BGA package (11.5x13mm). eMMC integrates a NAND Flash memory array (MLC or TLC) with a Flash controller in a single package, presenting a simple eMMC interface to the host. The controller handles all NAND management: wear leveling (distributing writes across all blocks), bad block management (remapping failed blocks), error correction (BCH or LDPC ECC with up to 40-bit correction per 1KB), and garbage collection (reclaiming space from invalidated pages). The eMMC 5.1 specification supports HS400 mode: 200MHz DDR clock on the CMD and DAT buses, achieving 400MB/s theoretical bandwidth (320MB/s typical). The 1.2V VDD2 supply powers the NAND core, while 1.8V VDDQ powers the I/O. The HS400 mode uses the DS (Data Strobe) signal from the eMMC to the host for read data timing, eliminating setup/hold timing margin issues. The device supports: (1) Command queuing (CQ) for improved random read/write performance by reordering commands; (2) Background operation (BKOPS) for automatic garbage collection during idle; (3) Secure erase and trim for efficient space management; (4) Write reliability features including power-fail protection and refresh of critical data. The -1M suffix specifies industrial temperature (-40C to +85C). The -WT suffix specifies tape-and-reel packaging. eMMC is the dominant non-removable storage solution for IoT, automotive infotainment, and embedded Linux systems.
| دبوس | الاسم | النوع | الوظيفة |
|---|---|---|---|
| 1-4 | DAT0-DAT3 | الإدخال/الإخراج | Data bus (8-bit wide in DDR mode, 4-bit default) |
| 5-6 | CMD/CLK | الإدخال/الإخراج | Command/response bus / Clock from host (up to 200MHz DDR) |
| 7 | دس | المخرجات | Data strobe (used in HS400 mode for read data timing) |
| 8-10 | VDD/VDDQ/VSS | الطاقة | Core supply (2.7-3.6V) / I/O supply (1.7-1.95V) / Ground |
| 11 | RST_n | المدخلات | Hardware reset (active LOW, resets controller and NAND) |
| 12-14 | VDD2/VSS2/RFU | الطاقة | 1.2V core supply / ground / reserved |
| 15-153 | DATA4-7/RFU | الإدخال/الإخراج | Extended data bus for 8-bit mode / reserved for future |
| الشركة المصنعة | رقم الجزء | الحزمة | الملاحظات |
|---|---|---|---|
| ميكرون | MTFC16GAKAJCN-1M-WT | BGA-153 | 16GB version, double density |
| ميكرون | MTFC4GAKAJCN-1M-WT | BGA-153 | 4GB version, half density |
| سامسونج | KLMBG2JETD-B041 | BGA-153 | 8GB eMMC 5.1, Samsung brand |
| SK Hynix | H26M41404HPR | BGA-153 | 8GB eMMC 5.1, Hynix brand |
| Kioxia | THGBMJG6C1LBAIL | BGA-153 | 8GB eMMC 5.1, Kioxia brand |
العلامة التجارية:
الحزمة:
دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1
العلامة التجارية:
الحزمة:
دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1
العلامة التجارية:
الحزمة:
دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1
العلامة التجارية:
الحزمة:
دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1
العلامة التجارية:
الحزمة:
دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1
العلامة التجارية:
الحزمة:
دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1
English English 
简体中文
Español
العربية
Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.
If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.
Settlement Currency
US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.
Bank Charges
All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.
Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.
MOQ & Sample Service
We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.
Packaging Standard
All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.
Import Duties & Taxes
All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.
Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.
