الصفحة الرئيسية > الدوائر المتكاملة الدوائر المتكاملة > MTFC4GMWDQ-3M AIT

MTFC4GMWDQ-3M AIT

4GB eMMC 5.1, HS400, 153-VFBGA, integrated controller, industrial temp

11847

المخزون الفعال

انتقل إلى الاستفسار

Image for reference only

جزء الشركة المصنعة ： جزء الشركة المصنعة

MTFC4GMWDQ-3M AIT

الحزمة ： الحزمة

153-VFBGA (11.5 x 13.0 x 1.0 mm)

الوصف

نظرة عامة على المنتج

The MTFC4GMWDQ-3M AIT from Micron is a 4GB (32Gb) eMMC 5.1 embedded NAND flash memory in a 153-ball VFBGA package. Featuring HS400 mode for high-speed embedded storage, it integrates the NAND controller and TLC/QLC flash in a single BGA package.

المواصفات الرئيسية

الكثافة	4GB (32Gb)
الواجهة	eMMC 5.1
Max Read Speed	Up to 300MB/s (HS400)
Max Write Speed	Up to 150MB/s
HS400 Mode	Yes (DDR at 200MHz)
Write Endurance	Program/Erase cycles per JEDEC
الحزمة	153-VFBGA (11.5 x 13.0mm)
درجة حرارة التشغيل	-25°C to +85°C (AIT grade)

الميزات

eMMC 5.1 compliant with HS400 support
Integrated NAND controller with ECC and wear leveling
Command queuing for improved random I/O performance
Field firmware update (FFU) capability
Built-in power-fail protection and refresh
Auto-standby and auto-sleep power modes

التطبيقات

Embedded system boot and storage
IoT device primary storage
Automotive infotainment systems
Industrial control storage
Smart TV and set-top box storage

مقدمة المنتج:MTFC4GMWDQ-3M AIT مقدمة المنتج

The MTFC4GMWDQ-3M AIT from Micron Technology is a 4GB eMMC 5.1 embedded NAND flash memory in a 153-ball VFBGA package. It integrates the NAND flash memory and controller in a single package, providing a complete managed storage solution. The eMMC 5.1 interface supports HS400 mode for up to 300MB/s read bandwidth. The integrated controller handles ECC, wear leveling, bad block management, and power-fail protection transparently. The AIT temperature grade supports -25C to +85C operation. Command queuing improves random I/O performance over legacy eMMC versions.

مبدأ العمل:MTFC4GMWDQ-3M AIT مبدأ العمل

The MTFC4GMWDQ-3M AIT integrates a NAND flash memory array with an on-die controller. The controller manages all flash operations including ECC (error correction code), wear leveling across all blocks, bad block detection and replacement, and power-fail recovery. The eMMC interface uses an 8-bit parallel bus with CMD/CLK/DAT signals. In HS400 mode, data is clocked on both rising and falling edges (DDR) at 200MHz, achieving 400MB/s raw bandwidth. The controller maps logical block addresses (LBAs) to physical flash pages, hiding the complexity of NAND management from the host.

وصف الدبوس:MTFC4GMWDQ-3M AIT تعريف الدبوس ووظائفه

مجموعة الدبوس	الاسم	النوع	الوظيفة
1	CMD	الإدخال/الإخراج	Command/response bus
2	CLK	المدخلات	Clock (up to 200MHz)
3-10	DAT0-DAT7	الإدخال/الإخراج	8-bit data bus
11	RST_n	المدخلات	إعادة ضبط الأجهزة (منخفضة نشطة)
12	VCC	الطاقة	Core/IO supply (1.8V/3.3V)
13	VCCQ	الطاقة	I/O supply voltage

Application Scenarios:In which products and applications isMTFC4GMWDQ-3M AIT مستعمل

Embedded Linux/Android boot and application storage
IoT gateway and edge device primary storage
Automotive infotainment system map and media storage
Industrial PLC and HMI data logging
Smart TV and set-top box firmware storage

Alternative Models:What chips are recommended as replacements for MTFC4GMWDQ-3M AIT

الشركة المصنعة	رقم الجزء	الحزمة	الملاحظات
ميكرون	MTFC8GAKAHQ-4M AIT	153-VFBGA	8GB upgrade, eMMC 5.1
سامسونج	KLMBG2JETD-B041	153-VFBGA	4GB eMMC 5.1, equivalent
SKhynix	H26M41204HPR	153-VFBGA	4GB eMMC 5.1 alternative
Western Digital	SDINBDG4-16G	153-VFBGA	16GB iNAND, higher density