الصفحة الرئيسية > الدوائر المتكاملة الدوائر المتكاملة > MT29F1G01ABAFDSF-IT:F

MT29F1G01ABAFDSF-IT:F

1Gb SPI NAND Flash, x4 I/O, internal ECC, WBGA-24

6000

المخزون الفعال

انتقل إلى الاستفسار

Image for reference only

جزء الشركة المصنعة ： جزء الشركة المصنعة

MT29F1G01ABAFDSF-IT:F

الحزمة ： الحزمة

24-ball WBGA (6.0 x 8.0 x 0.80 mm)

الوصف

نظرة عامة على المنتج

The MT29F1G01ABAFDSF-IT:F from Micron is a 1Gb (128MB) SPI NAND Flash with x1/x2/x4 I/O, 133MHz clock, and ECC in 24-ball WBGA.

المواصفات الرئيسية

الكثافة	1 Gb (128MB)
الواجهة	SPI (x1/x2/x4)
Max Clock	133 ميجاهرتز
Page Size	2048 + 128 bytes (spare)
Block Size	128KB (64 pages)
Blocks	1024
ECC	Internal ECC (4-bit/512B)
Endurance	3K P/E cycles typical
Supply	3.3V
الحزمة	24-ball WBGA (6x8mm)
درجة حرارة التشغيل	-40 to +85 C (IT)

الميزات

SPI interface compatible with standard SPI controllers
Internal 4-bit/512B ECC for reliability
Quad I/O for 532Mbps throughput
On-die ECC transparent to host
Industrial temperature range

التطبيقات

Embedded system mass storage
IoT firmware and data logging
Industrial data recorders
Automotive infotainment storage

مقدمة المنتج:MT29F1G01ABAFDSF-IT:F مقدمة المنتج

The MT29F1G01ABAFDSF-IT:F from Micron is a 1Gb (128MB) SPI NAND Flash memory in compact 24-ball WBGA package. It supports x1, x2, and x4 SPI modes with up to 133MHz clock for 532Mbps throughput in Quad I/O mode. The on-die ECC (4-bit per 512 bytes) corrects bit errors transparently, simplifying host controller design. The IT suffix denotes industrial temperature range (-40 to +85C). The F suffix indicates tape and reel packaging.

مبدأ العمل:MT29F1G01ABAFDSF-IT:F مبدأ العمل

The MT29F1G01ABAFDSF-IT:F operates as an SPI NAND Flash memory. (1) The SPI interface uses standard CS, SCK, SI, SO pins with optional IO2 and IO3 for Quad mode. The command set follows standard SPI NAND protocol with READ, PROGRAM, ERASE, and status register operations. At 133MHz Quad I/O, the equivalent throughput reaches 532Mbps. (2) The internal page size is 2048+128 bytes (data+spare). The on-die ECC engine computes 4-bit error correction per 512 bytes during read operations, storing ECC parity in the spare area during program. This transparent ECC simplifies host software and meets the reliability requirements of 3K P/E cycle NAND. (3) Memory is organized as 1024 blocks of 64 pages each. Block erase (128KB) is the minimum erase unit. Page program time is 300us typical, block erase 3ms typical. The 3K P/E cycle endurance with internal ECC provides adequate reliability for code and data storage in embedded applications.

وصف الدبوس:MT29F1G01ABAFDSF-IT:F تعريف الدبوس ووظائفه

دبوس	الاسم	الوصف
1	CS	Chip select; active-low; SPI interface enable
2	DO (IO1)	SPI data output / IO1 for Dual/Quad I/O; standard MISO function
3	WP (IO2)	Write protect / IO2 for Quad I/O; active-low write protection for status and lock registers
4	VSS	مرجع أرضي
5	DI (IO0)	SPI data input / IO0 for Dual/Quad I/O; standard MOSI function
6	SCK	SPI clock; supports Standard, Dual, and Quad SPI up to 133 MHz
7	HOLD (IO3)	Hold / IO3 for Quad I/O; pauses serial communication without deselecting
8	VCC	Power supply (2.7 V to 3.6 V); 0.1 uF decoupling capacitor required

Package: WSON-8 (6×5 mm with EP). Memory: 1 Gbit (128 MB). Page size: 2048 bytes. Erase: 128 KB block / 4 KB sub-sector. Endurance: 100,000 program/erase cycles. Internal ECC. Industrial temperature: -40 C to +85 C (-IT suffix).

Application Scenarios:In which products and applications isMT29F1G01ABAFDSF-IT:F مستعمل

Embedded System Mass Storage: 128 MB SPI NAND Flash as primary non-volatile storage for embedded Linux root filesystems with internal ECC simplifying controller design
IoT Data Logging: 1 Gbit capacity with 4 KB sub-sector erase for efficient circular buffer logging of sensor time-series data with 100K cycle endurance
Industrial Data Recorders: High-reliability 1 Gbit storage with internal ECC and 20-year retention for flight data recorders, event loggers, and black box applications
Automotive Infotainment: Quad I/O SPI throughput for map database and multimedia content storage in navigation and infotainment head units
Firmware OTA Staging: Large 128 MB capacity enabling A/B firmware partition strategy for safe over-the-air updates in industrial gateways and edge devices

Alternative Models:What chips are recommended as replacements for MT29F1G01ABAFDSF-IT:F

الطراز	الشركة المصنعة	الفرق الرئيسي	الحزمة	الكثافة
MT29F2G01ABAFDSF-IT:F	ميكرون	2Gb higher-density version with identical SPI NAND interface and internal ECC	WSON-8	2Gbit
GD5F1GQ4UBYIG	جيجا ديفايس	1Gb SPI NAND with comparable performance, internal ECC, and wide 2.7-3.6V supply	WSON-8	1Gbit
W25N01GVZEIG	وينبوند	1Gb SPI NAND in WSON-8 with continuous read mode and 3V supply for embedded systems	WSON-8	1Gbit
MT29F4G01ABAFDSF-IT:F	ميكرون	4Gb higher-capacity version for data-intensive logging and media storage applications	WSON-8	4Gbit
XM25QU128CIMR	XMC	1Gb SPI NAND with QPI mode and 3V supply as a cost-effective alternative source	WSON-8	1Gbit

The MT29F1G01ABAFDSF-IT:F is a 1Gb SPI NAND Flash with internal ECC, 3V supply, and -40 to +85C industrial temperature range (-IT suffix). The Micron SPI NAND family scales from 1Gb to 8Gb with identical pinout. Winbond W25N and GigaDevice GD5F series are pin-compatible alternatives with similar internal ECC architecture.