عرض أسعار فوري

الصفحة الرئيسية > الدوائر المتكاملة الدوائر المتكاملة > الدوائر المتكاملة الخطية التناظرية > LM224DR

LM224DR

Quad 30V 1.2MHz general-purpose op-amp in SOIC-14, -25C to 85C industrial temp range

12711

المخزون الفعال
انتقل إلى الاستفسار

Image for reference only

جزء الشركة المصنعة ： جزء الشركة المصنعة

LM224DR

الحزمة ： الحزمة

SOIC-14 (8.65 x 3.91 x 1.75mm)

العلامة التجارية ： العلامة التجارية
فئات المنتجات:：فئات المنتجات
الالتزام بالجودة
الشحن والدفع
الخدمة والتغليف
دليل المنتج
توصيات أخرى قد تكون مهتماً بها.

MCP2562FD-E/MF

10M08SAM153I7G

KSZ8794CNXIC

TH8056KDC-AAA-014-RE

LT1963AEQ#PBF

PIC24FJ64GA006-I/PT

EN5335QI

DRV8301DCAR

الوصف

نظرة عامة على المنتج

The LM224DR from Texas Instruments is a quad general-purpose operational amplifier designed for industrial applications. It features four independent high-gain op-amps in a SOIC-14 package, operating from a single supply up to 32V with a gain bandwidth product of 1.2 MHz.

المواصفات الرئيسية

عدد القنوات 4
نطاق جهد الإمداد 3V to 32V (single) or +/-1.5V to +/-16V (dual)
Gain Bandwidth Product 1.2 MHz
معدل الدوران 0.5 V/us
جهد إزاحة المدخلات 2 mV (typ), 5 mV (max)
تيار تحيز الإدخال 45 nA (typ)
Supply Current (per amp) 350 uA (typ)
CMRRR 70 dB (min)
درجة حرارة التشغيل -25 to 85 C
الحزمة SOIC-14

الميزات

  • Four independent op-amps in a single package
  • ESD protection of 2 kV (HBM)
  • Low input offset voltage of 2 mV typical
  • Wide supply voltage range from 3V to 32V
  • Short-circuit protected outputs

التطبيقات

  • Transducer amplifier circuits
  • كتل كسب التيار المستمر والمرشحات النشطة
  • Industrial signal conditioning
  • Buffer and follower circuits
  • Analog computation and instrumentation

The LM224DR is a quad operational amplifier from Texas Instruments, consisting of four independent high-gain internally frequency compensated operational amplifiers. Designed to operate from a single power supply over a wide range of voltages (3V to 32V), it can also operate from split supplies. The device features low power consumption, making it suitable for battery-powered applications. Each amplifier has a typical gain bandwidth product of 1.2 MHz and a slew rate of 0.5 V/us, providing adequate performance for most general-purpose signal conditioning applications.

The LM224DR integrates four independent op-amps, each employing a standard voltage-feedback architecture. **Input Stage**: A differential pair with PNP transistors provides the wide common-mode input range that includes ground (in single-supply operation). The input bias current is typically 45 nA flowing out of the input pins. **Gain Stage**: A high-gain voltage amplifier stage with internal compensation capacitor provides a gain-bandwidth product of 1.2 MHz and ensures unconditional stability with unity-gain feedback. **Output Stage**: A Class AB push-pull output stage can source and sink tens of milliamps, with short-circuit current limiting. The output swings to within approximately 1.5V of the negative rail under load. **Bias Network**: A shared bias network across all four amplifiers minimizes total quiescent current.

دبوس الاسم الوصف
1 OUT A Channel A Output
2 IN- A Channel A Inverting Input
3 IN+ A Channel A Non-Inverting Input
4 VCC Positive Supply Voltage
5 IN+ B Channel B Non-Inverting Input
6 IN- B Channel B Inverting Input
7 OUT B Channel B Output
8 OUT C Channel C Output
9 IN- C Channel C Inverting Input
10 IN+ C Channel C Non-Inverting Input
11 GND / VEE Negative Supply / Ground
12 IN+ D Channel D Non-Inverting Input
13 IN- D Channel D Inverting Input
14 OUT D Channel D Output
  • Signal Conditioning: Low-frequency transducer amplifiers for sensor interfaces in industrial control
  • Active Filters: Multiple 2nd-order filter stages using a single IC for audio or instrumentation
  • DC Gain Blocks: Instrumentation front-end amplifiers with single-supply operation down to 3V
  • Comparators: Open-loop voltage comparison for threshold detection in monitoring circuits
  • Oscillators: RC oscillators and waveform generators for timing and clock generation
الطراز الشركة المصنعة الفرق الرئيسي
LM324DR TI Extended temp range 0C to 70C
LM2902DR TI Automotive grade, -40C to 125C
MCP6004T-I/SL الرقاقة الدقيقة RRIO, 1.8V-6V, lower power
TLV274IPWR TI RRIO, 2.7V-16V, 3MHz GBW
OPA4340UA TI RRIO, 2.5V-5.5V, 5.5MHz GBW
قطع الغيار الموصى بها

DRV8301DCAR

3-phase motor gate driver, 1.7A/2.3A, 6-60V, integrated buck + CSA, HTSSOP-28

العلامة التجارية:

الحزمة:

HTSSOP-28 PowerPAD (9.7 x 4.4mm)
متوفر في المخزون:
9161pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

ADS1232IPWR

24-bit delta-sigma ADC with PGA, 10/80SPS, gain 1-128x, TSSOP-28, for weigh scales

العلامة التجارية:

الحزمة:

TSSOP-28 (9.7 x 4.4mm, 0.65mm pitch)
متوفر في المخزون:
4405pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

TPS73025DBVT

2.5V 200mA ultra-low-noise LDO, 30µVrms noise, 72dB PSRR, SOT-23-5

العلامة التجارية:

الحزمة:

SOT-23-5 (2.9 × 1.6 × 1.1 مم)
متوفر في المخزون:
9162pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

LM2576R-ADJ

3A adjustable step-down switching regulator, 4-40V input, 52kHz, TO-263-5 (D2PAK)

العلامة التجارية:

الحزمة:

TO-263-5 (D2PAK, 10.3 x 8.6mm)
متوفر في المخزون:
9462pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

TPS25921AD

4.5-60V 5A programmable eFuse, 50mΩ Ron, OV/UV/reverse current protection, SOIC-8

العلامة التجارية:

الحزمة:

SOIC-8 (4.9 x 3.9mm)
متوفر في المخزون:
4296pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

MSP430F5418AIPNR

16-bit ultra-low-power MCU, 25MHz, 128KB Flash, 16KB RAM, 4xUSART, 12-bit ADC/DAC, LQFP-80

العلامة التجارية:

الحزمة:

LQFP-80 (12x12mm, 0.5mm pitch)
متوفر في المخزون:
7299pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار
ضمان الجودة

Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.

1. Authorized & Genuine Sourcing Promise

All of our electronic components are procured from official authorized distributors and original manufacturers. We strictly reject counterfeits, refurbished parts, disassembled components and gray-market goods. Every product is guaranteed to be brand-new original parts and fully consistent with the original technical parameters. For branded products such as NXP IC series, we maintain complete supply channel documents to realize full product traceability.

2. Strict Full-batch Quality Inspection

We implement 100% full-batch quality control for all goods before shipment. Our professional QC team conducts multi-dimensional tests including appearance inspection, electrical parameter testing, performance verification and packaging check. Each batch of components is attached with complete inspection reports and batch records. We stick to zero-tolerance standards for defective products to ensure every piece of component meets industrial application requirements.

3. Industry Standard Compliance

Our products comply with a variety of international industry quality standards to adapt to high-standard application scenarios:
  • إلكترونيات السيارات: All automotive-grade components pass AEC-Q series certification, featuring excellent stability and durability to adapt to complex vehicle operating environments.
  • الأجهزة الطبية: High-reliability components meet medical industry safety and compliance regulations, ensuring stable operation for medical equipment.
  • Industrial Control & Consumer Electronics: Products conform to universal international electronic industry standards, suitable for long-term continuous operation of various equipment.

4. Professional Reliability Control

For static-sensitive, moisture-sensitive and precision components such as ICs, PCBs, sensors and connectors, we carry out reliability screening in advance. Combined with standardized ESD anti-static packaging and vacuum moisture-proof packaging, we avoid component damage caused by static electricity, dampness or collision during storage and transportation, and retain the original performance of products.

5. Traceability Management System

We establish a complete product traceability system. Each batch of goods corresponds to independent batch number, sourcing record, inspection record and delivery record. Customers can query the whole lifecycle information of components at any time. This system effectively solves quality risks and facilitates after-sales handling and production quality control for your company.

6. After-sales Quality Guarantee

If any product is confirmed to have non-conformity quality problems due to our reasons after receipt, we provide free return, exchange and supplementary delivery services. Our professional quality team will also conduct root cause analysis to optimize our quality control process. We respond to quality feedback within 24 hours to resolve your worries efficiently.

اتصل بنا

If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:

 

Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China

 

الشحن والدفع

Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.

1. Payment Terms

We offer a variety of secure and convenient payment methods to meet diverse business cooperation needs. Details are as follows:
  1. Accepted Payment Methods
  • T/T (Bank Wire Transfer): The primary settlement method for bulk orders and a widely used international payment channel.
  • PayPal: Ideal for small orders, sample orders and quick payments.

  1. Settlement Currency

     

    US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.

  2. Bank Charges

     

    All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.

  3. Payment Requirements
  • Sample and small orders: Shipment will be arranged upon full payment.
  • In-stock bulk orders: Goods will be delivered within 2 to 3 working days after full payment.

2. Shipping & Delivery

We partner with leading global logistics providers to ensure safe and fast delivery worldwide. Relevant details are listed below:
  1. Logistics Partners
  • International Express: DHL, FedEx, UPS, TNT
  • Economy Logistics: Air freight and sea freight for large-volume cargo
  • Domestic Delivery: SF Express, Yunda Express
  1. Order Processing Time
  • In-stock items: Orders confirmed and fully paid before 14:00 (GMT+8) will be shipped on the same day. All other orders will be dispatched within 1 to 2 working days.
  • Out-of-stock or sourced items: The delivery lead time will be confirmed separately according to brand and inventory status.
  1. Estimated Transit Time
  • International Express: 3 – 7 working days globally
  • Air Freight: 7 – 12 working days
  • Sea Freight: 25 – 40 working days for heavy and large bulk cargo
  1. Shipping Fee Rules
  • Shipping cost is calculated based on package weight, volume, destination and delivery method.
  • Both freight prepaid and freight collect are available. Please provide your courier account number in advance if you choose freight collect.
  • Free international express delivery is offered for large orders. Terms for long-term partners can be negotiated separately.
  1. Shipment Tracking
     

    Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.

3. General Order Rules & Notes

  1. MOQ & Sample Service

     

    We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.

  2. Packaging Standard

     

    All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.

4. Customs & Liability Statement

  1. Import Duties & Taxes

     

    All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.

  2. Handling of Lost or Damaged Goods
  • In case of loss or severe damage during transit, please contact us within 48 hours after receiving the tracking information. We will assist you in filing a claim with the logistics provider.
  • We shall not be liable for any losses caused by incorrect delivery address, wrong contact information or the buyer’s refusal to complete customs clearance.

5. Local Pickup in Shenzhen

Local pickup service is available for customers in Shenzhen and surrounding areas:
  • Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong Province, China
  • Business Hours: 09:00 – 18:00, Monday to Friday. Closed on weekends and official public holidays.
  • Notice: Please make an appointment via email or communication tools one day in advance, and present your order information upon pickup.

Contact Information

Email: info@materialparts.com

Tel / WhatsApp: +86 13760382860

الخدمة والتغليف

Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.

Core Services

1. One-stop Sourcing & BOM Support

We specialize in a full range of passive and active electronic components, including SMD resistors, power resistors, connectors, aviation connectors, LED beads, flexible circuit boards, printed circuit boards, and integrated circuits. Our professional team provides BOM list consolidation, component matching, and alternative model recommendation services. We support sample orders, small-batch trial production, and mass production orders with flexible MOQs to meet diverse procurement needs.

2. Genuine Product Guarantee & Full-process Quality Inspection

All products are sourced from official authorized channels and are 100% original genuine parts. Every batch of goods undergoes strict full-process quality inspection before delivery, with complete batch records and traceability documents provided. Our products comply with AEC-Q standards for automotive electronics and high-reliability specifications for medical devices. We eliminate counterfeits, refurbished parts and defective products from the source to secure your project production.

3. Fast Quotation & Order Processing

Our customer service team responds promptly to inquiries and quotation requests. All in-stock orders will be processed within one working day. We provide stocking reservation services for long-term cooperative customers, effectively solving problems such as component shortages and unstable supply chains.

4. Professional Technical Support

Our senior engineer team provides free technical consultation, model selection guidance and original manufacturer datasheets. We assist customers in solving problems related to product R&D, circuit design and component application, providing reliable technical support for project progress.

5. Sourcing for Special Components

Relying on our global supply chain network, we professionally source scarce components, obsolete parts and customized special components to efficiently solve your procurement difficulties.

6. Global Logistics & Document Services

We cooperate with mainstream international logistics providers including DHL, FedEx, UPS and TNT to achieve fast global delivery. We can provide complete export documents such as customs declaration files, commercial invoices and packing lists to ensure smooth customs clearance for international shipments. Local pickup is also available for customers in Shenzhen, China.

Professional Packaging Standards

Electronic components are sensitive to static electricity, collision, moisture and dust. We adopt industry-standard anti-static packaging solutions to fully ensure the integrity of goods during transportation and storage.

1. General Packaging Specifications

  • All components are packed separately to avoid damage caused by friction and collision;
  • Shockproof buffer materials are added for fragile products to ensure transportation safety;
  • Each package is clearly marked with part number, quantity, batch number and specifications for easy inventory counting and management.

2. Classified Professional Packaging

  • Anti-static Packaging: Static-sensitive components such as chips, circuit boards and sensors are packaged with anti-static bags, shielding boxes and conductive foam in strict accordance with international anti-static standards to prevent static damage.
  • Vacuum Moisture-proof Packaging: Moisture-sensitive components are vacuum-sealed with desiccants to isolate humid air, suitable for ocean transportation and long-term storage.
  • Original Factory Packaging: Integrated circuits of brands such as NXP are delivered with original reels, trays or tubes by default, retaining complete original packaging and adapting to automated SMT production lines.
  • Discrete Device Packaging: Discrete devices such as SMD resistors, power resistors and LEDs are quantitatively and classifiedly packaged with accurate quantity and clear marking.
  • Connector / Aviation Connector Packaging: Hard outer packaging is adopted to prevent pin bending and structural deformation.

3. Custom Packaging Services

We provide value-added services including personalized packaging, custom labeling and re-reeling according to customer requirements, fully matching your production and warehouse management standards.

Contact Information

For service consultation or packaging customization, please feel free to contact us:
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
 

Online Inquiry Form

Support Excel, PDF, CSV format files for full BOM list quotation

Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.

الشركة
الرؤى
الصناعات
جميع المنتجات
الدوائر المتكاملة
أجهزة C&I
منفصلة
رقائق الذاكرة
وحدات MPUs و MCUs