نظرة عامة على المنتج
The EPCQ16ASI8N from Intel/Altera is a 16Mb serial configuration device for FPGA programming in an 8-pin SOIC package. Operating from 2.7-3.6V, it supports Active Serial (AS) x1 and x4 configuration modes for Intel FPGAs with in-system programming (ISP) capability.
المواصفات الرئيسية
| Memory Density | 16 Mbit (2 MB) |
| Memory Type | Non-volatile Flash |
| Operating Voltage | 2.7 فولت إلى 3.6 فولت |
| الحد الأقصى لتردد الساعة | 100 MHz |
| Configuration Modes | AS x1, AS x4 (Active Serial) |
| ISP Support | Yes (via JTAG through FPGA) |
| Erase/Program Cycles | >100,000 cycles |
| الاحتفاظ بالبيانات | >20 years |
| Sector Organization | 64KB sectors, 4KB/32KB subsectors |
| Quad Read Support | Yes (extended quad input fast read) |
| Dual Read Support | Yes (extended dual input fast read) |
| درجة حرارة التشغيل | -40 to +85°C (I suffix) |
| الحزمة | SOIC-8 (3.9mm width, SI suffix) |
الميزات
- 16Mb serial Flash for Intel FPGA configuration
- Active Serial (AS) x1 and x4 modes
- 2.7-3.6V single supply operation
- In-system programming (ISP) via JTAG
- Reprogrammable >100,000 erase/program cycles
- Fast read, dual input fast read, quad input fast read
- Write protection via status register bits
- 4KB, 32KB, 64KB erase granularity
- Low-cost, low-pin-count configuration solution
- 20-year data retention minimum
التطبيقات
- Intel Cyclone/Arria FPGA configuration storage
- Industrial control FPGA boot Flash
- Communication equipment FPGA programming
- Automotive ECU FPGA configuration