عرض أسعار فوري

الصفحة الرئيسية > الدوائر المتكاملة الدوائر المتكاملة > CP2103-GMR

CP2103-GMR

USB-to-UART bridge, USB 2.0 FS, 300bps-2Mbps UART, 4 GPIO, internal EEPROM, QFN-28 (NRND)

9251

المخزون الفعال
انتقل إلى الاستفسار

Image for reference only

جزء الشركة المصنعة ： جزء الشركة المصنعة

CP2103-GMR

الحزمة ： الحزمة

QFN-28 (5.00 x 5.00 x 0.90 mm)

العلامة التجارية ： العلامة التجارية
فئات المنتجات:：فئات المنتجات
الالتزام بالجودة
الشحن والدفع
الخدمة والتغليف
دليل المنتج
توصيات أخرى قد تكون مهتماً بها.

ADUM2401ARWZ-RL

BSP452

ADUM1301BRWZ-RL

KSZ8863RLLI

ADM2484EBRWZ

ADM2484EBRWZ-REEL7

STM32F100C8T6

IRFB4332PBF

الوصف

نظرة عامة على المنتج

The CP2103-GMR from Silicon Labs is a USB-to-UART bridge controller in a QFN-28 (5x5mm) package. It provides a complete USB 2.0 full-speed to UART bridge with 4 configurable GPIO pins, internal EEPROM for USB configuration, and supports UART data rates from 300bps to 2Mbps. The device is NRND (Not Recommended for New Designs).

المواصفات الرئيسية

USB Standard USB 2.0 Full-Speed
UART Data Rate 300bps ~ 2Mbps
جهد الإمداد 3.0V ~ 3.6V (internal regulator for USB 5V)
GPIO 4 (Configurable)
Internal EEPROM Yes (USB configuration parameters)
ESD Protection Yes
الحزمة QFN-28 (5.00 x 5.00mm)
درجة حرارة التشغيل -40°C ~ +85°C
Product Status NRND (Not Recommended for New Designs)

الميزات

  • Complete USB-to-UART bridge with no external components required
  • Integrated USB transceiver with no external resistors needed
  • On-chip voltage regulator accepts USB 5V supply
  • 4 configurable GPIO pins for modem or status signals
  • Internal EEPROM stores USB VID/PID and configuration data
  • Supports hardware handshake signals (RTS/CTS, DTR/DSR)
  • Free virtual COM port drivers for Windows, Linux, macOS
  • Lead-free QFN-28 package

التطبيقات

  • USB-to-RS232/RS485 adapter cables
  • Embedded system debug and programming interfaces
  • Consumer device PC connectivity
  • Industrial equipment USB communication ports
  • IoT device programming and configuration

The CP2103-GMR from Silicon Labs is a highly integrated USB-to-UART bridge controller that provides a complete solution for adding USB connectivity to legacy UART-based devices. It integrates a USB 2.0 full-speed transceiver, USB controller, and UART interface in a single 28-pin QFN package with no external USB components required. The internal voltage regulator allows the device to be powered directly from the USB 5V bus. Four configurable GPIO pins can be used for modem control signals or general-purpose I/O. The internal EEPROM stores USB vendor ID (VID), product ID (PID), and other USB configuration parameters, allowing customization without external programming. Free virtual COM port (VCP) drivers are available for Windows, Linux, and macOS, enabling the device to appear as a standard serial port to application software. Note: This device is NRND; the CP2102N is the recommended replacement for new designs.

The CP2103 operates as a protocol bridge between USB and UART domains. On the USB side, the integrated USB transceiver connects directly to the USB bus via the D+ and D- pins. The USB controller handles all USB protocol-level operations including device enumeration, endpoint management, and data packet formatting. On the UART side, TXD and RXD pins provide asynchronous serial data transfer, while optional RTS, CTS, DTR, and DSR pins support hardware flow control. Data received from USB is buffered and converted to UART format with the configured baud rate, data bits, stop bits, and parity. Conversely, UART data is buffered and formatted into USB bulk transfers for upstream transmission. The internal EEPROM is programmed via a Silicon Labs host utility to store custom USB descriptors. The 4 GPIO pins can be individually configured as inputs or outputs and controlled through the VCP driver API. An internal oscillator eliminates the need for an external crystal.

دبوس الاسم الوظيفة
1 VREGIN USB bus power input (4.0V-5.25V)
2 D+ USB data positive
3 D- USB data negative
4 GND أرضي
5 VBUS USB VBUS sense input
6 TXD UART transmit data output
7 RXD UART receive data input
8 CTS Clear To Send input
9 RTS Request To Send output
10 DTR Data Terminal Ready output
11 DSR Data Set Ready input
12 DCD Data Carrier Detect input
13 RI Ring Indicator input
14-17 GPIO0-GPIO3 Configurable general-purpose I/O
18 VDD 3.0V-3.6V supply output (internal regulator)
  • USB Debug Adapter: Provides virtual COM port for MCU UART debug output; DTR/RTS signals enable automatic reset for bootloader programming
  • Industrial Equipment USB Port: Converts legacy RS-232 equipment to USB connectivity; internal EEPROM allows custom VID/PID branding
  • IoT Device Configuration: USB interface for field firmware updates and sensor configuration via UART bootloader
  • Consumer Device PC Link: 4 GPIO pins control device power and status LEDs; free VCP drivers ensure cross-platform compatibility
الطراز الشركة المصنعة الفرق الرئيسي
CP2102N-A02-GQFN24 مختبرات السيليكون Recommended replacement, QFN-24, lower cost
CP2104-F03-GM مختبرات السيليكون Smaller QFN-24, 2Mbps, configurable
CH340G WCH Low-cost alternative, SOIC-16
FT232RQ FTDI QFN-32, 3Mbps, extensive driver support
MCP2221A-I/P الرقاقة الدقيقة USB-to-UART + I2C, DIP-14
قطع الغيار الموصى بها

C8051F020-GQ

Mixed-signal 8051 MCU, 64KB flash, 12-bit ADC/DAC, 25MIPS, TQFP-100

العلامة التجارية:

الحزمة:

TQFP-100 (14 x 14 x 1 mm)
متوفر في المخزون:
2134pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

CP2103-GM

USB-to-UART bridge, 1Mbps, QFN-28

العلامة التجارية:

الحزمة:

QFN-28 (5x5mm)
متوفر في المخزون:
8201pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

ILX232DT

3.3V RS-232 transceiver, 250kbps, 3TX/3RX, TSSOP-20

العلامة التجارية:

الحزمة:

TSSOP-20
متوفر في المخزون:
2711pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

C8051F040-GQ

8051 MCU, 25MHz, 64KB Flash, TQFP-100

العلامة التجارية:

الحزمة:

TQFP-100 (14.0 x 14.0 x 1.2mm)
متوفر في المخزون:
12215pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

SI8600AC-B-IS

Bidirectional I2C isolator, 2ch, 1.7MHz, 3.75kVrms, SOIC-8

العلامة التجارية:

الحزمة:

SOIC-8 Narrow (4.9 x 3.9 x 1.5 mm)
متوفر في المخزون:
4454pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

CP2108-B03-GMR

USB-to-Quad-UART bridge, 4ch, 2Mbps, 16 GPIO, QFN-64

العلامة التجارية:

الحزمة:

QFN-64 (9.0 x 9.0 x 0.9 mm, exposed pad)
متوفر في المخزون:
4720pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار
ضمان الجودة

Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.

1. Authorized & Genuine Sourcing Promise

All of our electronic components are procured from official authorized distributors and original manufacturers. We strictly reject counterfeits, refurbished parts, disassembled components and gray-market goods. Every product is guaranteed to be brand-new original parts and fully consistent with the original technical parameters. For branded products such as NXP IC series, we maintain complete supply channel documents to realize full product traceability.

2. Strict Full-batch Quality Inspection

We implement 100% full-batch quality control for all goods before shipment. Our professional QC team conducts multi-dimensional tests including appearance inspection, electrical parameter testing, performance verification and packaging check. Each batch of components is attached with complete inspection reports and batch records. We stick to zero-tolerance standards for defective products to ensure every piece of component meets industrial application requirements.

3. Industry Standard Compliance

Our products comply with a variety of international industry quality standards to adapt to high-standard application scenarios:
  • إلكترونيات السيارات: All automotive-grade components pass AEC-Q series certification, featuring excellent stability and durability to adapt to complex vehicle operating environments.
  • الأجهزة الطبية: High-reliability components meet medical industry safety and compliance regulations, ensuring stable operation for medical equipment.
  • Industrial Control & Consumer Electronics: Products conform to universal international electronic industry standards, suitable for long-term continuous operation of various equipment.

4. Professional Reliability Control

For static-sensitive, moisture-sensitive and precision components such as ICs, PCBs, sensors and connectors, we carry out reliability screening in advance. Combined with standardized ESD anti-static packaging and vacuum moisture-proof packaging, we avoid component damage caused by static electricity, dampness or collision during storage and transportation, and retain the original performance of products.

5. Traceability Management System

We establish a complete product traceability system. Each batch of goods corresponds to independent batch number, sourcing record, inspection record and delivery record. Customers can query the whole lifecycle information of components at any time. This system effectively solves quality risks and facilitates after-sales handling and production quality control for your company.

6. After-sales Quality Guarantee

If any product is confirmed to have non-conformity quality problems due to our reasons after receipt, we provide free return, exchange and supplementary delivery services. Our professional quality team will also conduct root cause analysis to optimize our quality control process. We respond to quality feedback within 24 hours to resolve your worries efficiently.

اتصل بنا

If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:

 

Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China

 

الشحن والدفع

Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.

1. Payment Terms

We offer a variety of secure and convenient payment methods to meet diverse business cooperation needs. Details are as follows:
  1. Accepted Payment Methods
  • T/T (Bank Wire Transfer): The primary settlement method for bulk orders and a widely used international payment channel.
  • PayPal: Ideal for small orders, sample orders and quick payments.

  1. Settlement Currency

     

    US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.

  2. Bank Charges

     

    All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.

  3. Payment Requirements
  • Sample and small orders: Shipment will be arranged upon full payment.
  • In-stock bulk orders: Goods will be delivered within 2 to 3 working days after full payment.

2. Shipping & Delivery

We partner with leading global logistics providers to ensure safe and fast delivery worldwide. Relevant details are listed below:
  1. Logistics Partners
  • International Express: DHL, FedEx, UPS, TNT
  • Economy Logistics: Air freight and sea freight for large-volume cargo
  • Domestic Delivery: SF Express, Yunda Express
  1. Order Processing Time
  • In-stock items: Orders confirmed and fully paid before 14:00 (GMT+8) will be shipped on the same day. All other orders will be dispatched within 1 to 2 working days.
  • Out-of-stock or sourced items: The delivery lead time will be confirmed separately according to brand and inventory status.
  1. Estimated Transit Time
  • International Express: 3 – 7 working days globally
  • Air Freight: 7 – 12 working days
  • Sea Freight: 25 – 40 working days for heavy and large bulk cargo
  1. Shipping Fee Rules
  • Shipping cost is calculated based on package weight, volume, destination and delivery method.
  • Both freight prepaid and freight collect are available. Please provide your courier account number in advance if you choose freight collect.
  • Free international express delivery is offered for large orders. Terms for long-term partners can be negotiated separately.
  1. Shipment Tracking
     

    Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.

3. General Order Rules & Notes

  1. MOQ & Sample Service

     

    We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.

  2. Packaging Standard

     

    All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.

4. Customs & Liability Statement

  1. Import Duties & Taxes

     

    All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.

  2. Handling of Lost or Damaged Goods
  • In case of loss or severe damage during transit, please contact us within 48 hours after receiving the tracking information. We will assist you in filing a claim with the logistics provider.
  • We shall not be liable for any losses caused by incorrect delivery address, wrong contact information or the buyer’s refusal to complete customs clearance.

5. Local Pickup in Shenzhen

Local pickup service is available for customers in Shenzhen and surrounding areas:
  • Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong Province, China
  • Business Hours: 09:00 – 18:00, Monday to Friday. Closed on weekends and official public holidays.
  • Notice: Please make an appointment via email or communication tools one day in advance, and present your order information upon pickup.

Contact Information

Email: info@materialparts.com

Tel / WhatsApp: +86 13760382860

الخدمة والتغليف

Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.

Core Services

1. One-stop Sourcing & BOM Support

We specialize in a full range of passive and active electronic components, including SMD resistors, power resistors, connectors, aviation connectors, LED beads, flexible circuit boards, printed circuit boards, and integrated circuits. Our professional team provides BOM list consolidation, component matching, and alternative model recommendation services. We support sample orders, small-batch trial production, and mass production orders with flexible MOQs to meet diverse procurement needs.

2. Genuine Product Guarantee & Full-process Quality Inspection

All products are sourced from official authorized channels and are 100% original genuine parts. Every batch of goods undergoes strict full-process quality inspection before delivery, with complete batch records and traceability documents provided. Our products comply with AEC-Q standards for automotive electronics and high-reliability specifications for medical devices. We eliminate counterfeits, refurbished parts and defective products from the source to secure your project production.

3. Fast Quotation & Order Processing

Our customer service team responds promptly to inquiries and quotation requests. All in-stock orders will be processed within one working day. We provide stocking reservation services for long-term cooperative customers, effectively solving problems such as component shortages and unstable supply chains.

4. Professional Technical Support

Our senior engineer team provides free technical consultation, model selection guidance and original manufacturer datasheets. We assist customers in solving problems related to product R&D, circuit design and component application, providing reliable technical support for project progress.

5. Sourcing for Special Components

Relying on our global supply chain network, we professionally source scarce components, obsolete parts and customized special components to efficiently solve your procurement difficulties.

6. Global Logistics & Document Services

We cooperate with mainstream international logistics providers including DHL, FedEx, UPS and TNT to achieve fast global delivery. We can provide complete export documents such as customs declaration files, commercial invoices and packing lists to ensure smooth customs clearance for international shipments. Local pickup is also available for customers in Shenzhen, China.

Professional Packaging Standards

Electronic components are sensitive to static electricity, collision, moisture and dust. We adopt industry-standard anti-static packaging solutions to fully ensure the integrity of goods during transportation and storage.

1. General Packaging Specifications

  • All components are packed separately to avoid damage caused by friction and collision;
  • Shockproof buffer materials are added for fragile products to ensure transportation safety;
  • Each package is clearly marked with part number, quantity, batch number and specifications for easy inventory counting and management.

2. Classified Professional Packaging

  • Anti-static Packaging: Static-sensitive components such as chips, circuit boards and sensors are packaged with anti-static bags, shielding boxes and conductive foam in strict accordance with international anti-static standards to prevent static damage.
  • Vacuum Moisture-proof Packaging: Moisture-sensitive components are vacuum-sealed with desiccants to isolate humid air, suitable for ocean transportation and long-term storage.
  • Original Factory Packaging: Integrated circuits of brands such as NXP are delivered with original reels, trays or tubes by default, retaining complete original packaging and adapting to automated SMT production lines.
  • Discrete Device Packaging: Discrete devices such as SMD resistors, power resistors and LEDs are quantitatively and classifiedly packaged with accurate quantity and clear marking.
  • Connector / Aviation Connector Packaging: Hard outer packaging is adopted to prevent pin bending and structural deformation.

3. Custom Packaging Services

We provide value-added services including personalized packaging, custom labeling and re-reeling according to customer requirements, fully matching your production and warehouse management standards.

Contact Information

For service consultation or packaging customization, please feel free to contact us:
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
 

Online Inquiry Form

Support Excel, PDF, CSV format files for full BOM list quotation

Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.

الشركة
الرؤى
الصناعات
جميع المنتجات
الدوائر المتكاملة
أجهزة C&I
منفصلة
رقائق الذاكرة
وحدات MPUs و MCUs