الصفحة الرئيسية > الدوائر المتكاملة الدوائر المتكاملة > CD4060BE

CD4060BE

14-stage binary counter + oscillator, CMOS 3-18V, divide by 16384, PDIP-16

5000

المخزون الفعال

انتقل إلى الاستفسار

Image for reference only

جزء الشركة المصنعة ： جزء الشركة المصنعة

CD4060BE

الحزمة ： الحزمة

PDIP-16 (19.3 x 9.4 x 4.57mm, 2.54mm pitch, through-hole)

العلامة التجارية ： العلامة التجارية

فئات المنتجات:：فئات المنتجات

الدوائر المتكاملة الدوائر المتكاملة, واجهة ICs

توصيات أخرى قد تكون مهتماً بها.

SII9396SCNUC-BAR

IS43TR16256BL-125KBLI

الوصف

نظرة عامة على المنتج

The CD4060BE from Texas Instruments is a 14-stage binary ripple counter with an integrated oscillator section that supports both RC and crystal configurations — a one-chip solution for clock generation and frequency division in a 16-pin PDIP package.

المواصفات الرئيسية

الوظيفة	14-stage binary ripple counter/divider + oscillator
Technology	CD4000B CMOS
جهد الإمداد	3V to 18V
Counter Stages	14 (internal), 10 outputs accessible (Q4-Q14)
الحد الأقصى لتردد الساعة	12MHz @ VDD=15V; 8MHz @ 10V; 3MHz @ 5V
Oscillator RC Frequency	690kHz min @ VDD=15V
إعادة تعيين	Asynchronous, active HIGH (MR)
Trigger	Negative edge on CP1
تأخير الانتشار	300ns typical @ VDD=10V (input to Q4)
Transition Time	100ns typical @ VDD=10V
درجة حرارة التشغيل	-55 درجة مئوية إلى +125 درجة مئوية
الحزمة	PDIP-16 (19.3 x 9.4mm)

الميزات

Integrated oscillator (RC or crystal)
14-stage binary counter — divide by up to 16384 (2^14)
10 buffered outputs: Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14
Schmitt trigger on clock input — unlimited rise/fall times
Common asynchronous reset (disables oscillator when HIGH)
Fully static operation
3V-18V wide supply range

التطبيقات

Time delay circuits
Frequency dividers
Timer/clock generation (1Hz from 32.768kHz crystal)
Digital clocks and watches
Control counters

مقدمة المنتج:CD4060BE مقدمة المنتج

The CD4060BE from Texas Instruments combines a CMOS oscillator and a 14-stage binary ripple counter in a single 16-pin DIP package. The oscillator section can be configured as an RC oscillator (using 2 resistors and 1 capacitor) or a crystal oscillator (using 1 crystal, 2 capacitors, and 1 resistor), generating the clock internally. The 14 counter stages divide the oscillator frequency by 2^4 through 2^14 (16 to 16384). Only 10 of the 14 stages have accessible outputs: Q4-Q14. Q1, Q2, and Q3 are internal-only, which means the lowest division ratio available at a pin is divide-by-16 (Q4). The asynchronous reset (MR, pin 12) clears all counter stages and disables the oscillator when HIGH. When MR returns LOW, counting resumes from zero. The Schmitt trigger on the clock input allows unlimited rise and fall times on the clock signal. The CD4060 is the go-to IC for generating long time delays: a 32.768kHz crystal divided by 2^14 (Q14) produces exactly 2Hz; with an additional flip-flop (CD4013), a precise 1Hz clock is obtained. The BE suffix denotes the PDIP-16 package.

مبدأ العمل:CD4060BE مبدأ العمل

The CD4060BE consists of two functional blocks: (1) An oscillator section built around two inverters (pins 9, 10, 11) that can be configured as RC or crystal oscillator. For RC mode: R and C connect between pins 10 and 11, with R from pin 11 to pin 9 and C from pin 10 to pin 9. Frequency ≈ 1/(2.2·R·C). For crystal mode: crystal between pins 10 and 11; capacitors from each pin to ground; feedback resistor from pin 9 to 10. (2) A 14-stage binary ripple counter driven by the oscillator output. Each stage divides by 2. The counter advances on the negative-going transition of the clock. The 14 stages provide division ratios of 2^1 through 2^14, but only Q4 through Q14 have external pins. The missing Q1, Q2, Q3 outputs mean the lowest available output is Q4 (divide by 16). The reset input (MR=HIGH) forces all outputs LOW and stops the oscillator. When MR goes LOW, the oscillator restarts and counting resumes from zero. The Q4-Q14 outputs can be used individually for various frequency divisions or cascaded to other counters for longer counts.

وصف الدبوس:CD4060BE تعريف الدبوس ووظائفه

دبوس	الاسم	النوع	الوصف
1	Q12	المخرجات	Counter output stage 12 (divide by 4096)
2	Q13	المخرجات	Counter output stage 13 (divide by 8192)
3	Q14	المخرجات	Counter output stage 14 (divide by 16384)
4	Q6	المخرجات	Counter output stage 6 (divide by 64)
5	Q5	المخرجات	Counter output stage 5 (divide by 32)
6	Q7	المخرجات	Counter output stage 7 (divide by 128)
7	Q4	المخرجات	Counter output stage 4 (divide by 16)
8	VSS	الطاقة	أرضي
9	ΦO	المخرجات	Oscillator output (non-inverted)
10	ΦŌ	المخرجات	Oscillator output (inverted)
11	ΦI	المدخلات	Oscillator input / external clock input
12	R (MR)	المدخلات	Master reset (active HIGH, resets counter and disables oscillator)
13	Q9	المخرجات	Counter output stage 9 (divide by 512)
14	Q8	المخرجات	Counter output stage 8 (divide by 256)
15	Q10	المخرجات	Counter output stage 10 (divide by 1024)
16	VDD	الطاقة	Supply (3V to 18V)

Application Scenarios:In which products and applications isCD4060BE مستعمل

1Hz Clock from 32.768kHz Crystal: 32.768kHz crystal on pins 10-11; Q14 = 2Hz; CD4013 flip-flop divides by 2 = 1Hz; drives digital clock seconds
RC Timer: R=1MΩ, C=10µF → f≈0.045Hz; Q14 period ≈ 16384/0.045 ≈ 364,000s ≈ 101 hours; long time delay with only 3 external components
Frequency Divider Chain: 1MHz input → Q4=62.5kHz, Q7=7.8kHz, Q10=976Hz, Q14=61Hz; multiple tap points from one IC
External Clock: Clock signal on pin 11; pins 9 and 10 unused; counter divides external clock by 16 to 16384

Alternative Models:What chips are recommended as replacements for CD4060BE

الطراز	الشركة المصنعة	الفرق الرئيسي	الحزمة	Supply
CD4060BM	TI	SOIC-16 surface-mount version with identical logic function and 3-18V range	SOIC-16	3-18V
CD4060BE	TI	Through-hole DIP version for prototyping and legacy board repair	DIP-16	3-18V
HEF4060BT	NXP	Pin-compatible CMOS version with improved ESD protection and 3-15V supply	SOIC-16	3-15V
MC144060BDR2G	أونسمي	Pin-compatible equivalent with RoHS compliance and AEC-Q100 automotive option	SOIC-16	3-18V
74HC4060D	TI/Nexperia	HC CMOS version with higher speed and 2-6V supply for modern logic systems	SOIC-16	2-6V
74HC4060N	TI/Nexperia	HC CMOS through-hole version for prototyping with 2-6V supply range	DIP-16	2-6V
74HCT4060D	نيكسبيريا	HCT version with TTL-compatible inputs for mixed 5V TTL/CMOS systems	SOIC-16	4.5-5.5V

CD4060 is the CMOS 4000-series 14-stage ripple-carry counter/oscillator operating over the wide 3-18V supply range. The HEF4060 (NXP) and MC144060 (onsemi) are direct pin-compatible equivalents. For higher speed at the cost of narrower voltage range, the 74HC4060 HC/HCT families offer significantly faster propagation delay and lower power consumption at 2-6V. Surface-mount versions use the BM/M suffix (SOIC); through-hole versions use the BE suffix (DIP).