الصفحة الرئيسية > الدوائر المتكاملة الدوائر المتكاملة > 5M160ZE64I5N

5M160ZE64I5N

MAX V CPLD, 160 LE / 128 MC, 7.5ns, 1.8V core, EQFP-64

14149

المخزون الفعال

انتقل إلى الاستفسار

Image for reference only

جزء الشركة المصنعة ： جزء الشركة المصنعة

5M160ZE64I5N

الحزمة ： الحزمة

EQFP-64 (7 × 7 × 1.55 mm)

الوصف

نظرة عامة على المنتج

The 5M160ZE64I5N is a MAX V CPLD from Intel (formerly Altera), featuring 160 logic elements (128 macrocells) in a low-cost, low-power, non-volatile architecture. It offers instant-on configuration (0.5 ms or less), standby current as low as 25 µA, and MultiVolt I/O supporting 1.2 V to 3.3 V logic levels, packaged in a 64-pin EQFP.

المواصفات الرئيسية

Logic Elements: 160 (128 equivalent macrocells)
Pin-to-Pin Delay: 7.5 ns
User Flash Memory: 8 Kbits (up to 1000 read/write cycles)
Core Supply: 1.8 V single external supply
MultiVolt I/O: 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V
Standby Current: 25 µA typ
Internal Oscillator: Yes
JTAG ISP: IEEE 1149.1 compliant
I/O Banks: 2
Maximum I/O: 54
Operating Temperature: -40°C to +100°C (I grade)
Package: EQFP-64 (7 × 7 mm)

الميزات

Non-volatile, instant-on CPLD (no external configuration needed)
Ultra-low standby power (25 µA)
Emulated LVDS output up to 304 Mbps
Emulated RSDS output up to 200 Mbps
Programmable slew rate and drive strength per pin
Schmitt trigger inputs for noise tolerance
Hot-socket compliant
On-chip user flash memory for non-volatile storage

التطبيقات

Board-level glue logic and address decoding
I/O expansion and bus bridging
Power sequencing and supervisory logic
Configuration controller for FPGAs
Industrial control state machines

مقدمة المنتج:5M160ZE64I5N مقدمة المنتج

The 5M160ZE64I5N is a member of Intel’s MAX V CPLD family, built on a low-cost, low-power, non-volatile architecture using 180 nm process technology. With 160 logic elements organized as 128 equivalent macrocells and 8 Kbits of user flash memory, the device provides flexible combinational and sequential logic capabilities. The instant-on configuration (0.5 ms) eliminates the need for external configuration devices, simplifying board design. The MultiVolt I/O interface supports 1.2 V to 3.3 V logic levels across two I/O banks, enabling mixed-voltage system integration. Standby current as low as 25 µA makes it ideal for battery-powered applications. The device supports JTAG in-system programming and features Schmitt trigger inputs for noise-tolerant operation.

مبدأ العمل:5M160ZE64I5N مبدأ العمل

The MAX V CPLD uses a non-volatile flash-based architecture where the configuration is stored on-chip, enabling instant-on operation without external configuration devices. Logic is implemented through Logic Array Blocks (LABs), each containing 10 logic elements (LEs). Each LE contains a 4-input look-up table (LUT), a programmable register, and carry/chain logic. Interconnect routing between LABs is configured during programming. The MultiVolt I/O architecture separates core (1.8 V) and I/O (1.2-3.3 V) supplies, allowing direct connection to different voltage domains. The 8 Kbit user flash memory block provides non-volatile storage for calibration data or serial numbers. JTAG interface enables in-system programming and boundary-scan testing per IEEE 1149.1.

وصف الدبوس:5M160ZE64I5N تعريف الدبوس ووظائفه

دبوس	الاسم	الوصف
1	VCCIO1	I/O Bank 1 Supply (1.2-3.3V)
2	IO/DATA0	Dual-purpose I/O / JTAG Data
3-6	IO	الإدخال/الإخراج للأغراض العامة
7	GND	أرضي
8-15	IO	الإدخال/الإخراج للأغراض العامة
16	TCK	JTAG Clock
17	TMS	JTAG Mode Select
18	TDI	JTAG Data Input
19	TDO	JTAG Data Output
20-31	IO	الإدخال/الإخراج للأغراض العامة
32	VCCINT	Core Supply (1.8V)
33-48	IO/GND	I/O and Ground
49	VCCIO2	I/O Bank 2 Supply (1.2-3.3V)
50-64	IO/GND	I/O and Ground

Application Scenarios:In which products and applications is5M160ZE64I5N مستعمل

Board-Level Glue Logic: Address decoding, chip select generation, and bus arbitration in multi-device systems
Power Sequencing: Multi-rail power-up/down control with precision timing for FPGAs and processors
I/O Expansion: Interface bridging between different voltage domains (1.2V-3.3V) using MultiVolt I/O
FPGA Configuration Controller: Non-volatile storage and sequencing for SRAM-based FPGA boot-up
Industrial State Machines: Deterministic, instant-on control logic for safety-critical industrial applications

Alternative Models:What chips are recommended as replacements for 5M160ZE64I5N

الطراز	العلامة التجارية	LEs	MCs	الحزمة
5M40ZE64I5N	إنتل	40	32	EQFP-64
5M80ZE64I5N	إنتل	80	64	EQFP-64
EPM240F100I5N	إنتل	240	192	TQFP-100
XC2C64A-7VQG44I	Xilinx	64	64	QFP-44
MachXO2-1200HC	Lattice	1280	-	TQFP-100