Presupuesto instantáneo

Inicio > Circuitos integrados IC > TCA9548APWR

TCA9548APWR

8-ch I2C switch/mux, 1.65-5.5V, 400kHz, 3 addr pins, reset, TSSOP-24

9044

Inventario efectivo
Ir a la consulta

Image for reference only

Pieza del fabricante：

TCA9548APWR

Paquete：

TSSOP-24 (7.8 x 4.4 x 1.2 mm, PW package)

Marca：
Categorías de productos：
Compromiso de calidad
Envíos y pagos
Servicio y embalaje
Manual del producto
Otras recomendaciones que pueden interesarle.

MMSZ5263BT1G

SMBJ60A-13-F

KSZ8863RLL

PIC16F1823-E/SL

H57V2562GTR-75C

LT1963AES8

XC7Z010-1CLG400I

UCC2804DTR

Descripción

Productos

The TCA9548APWR from Texas Instruments is an 8-channel I2C switch/multiplexer with reset, allowing a single I2C master to communicate with up to 8 I2C slave devices sharing the same address in a TSSOP-24 package.

Especificaciones

Función 8-Channel I2C Switch / Multiplexer
I2C Channels 1 master to 8 downstream channels
Tensión de alimentación 1.65V to 5.5V
I2C Clock Frequency 400 kHz (Fast Mode)
Address Pins 3 (A0-A2, 8 possible I2C addresses)
Reset Pin Yes (active LOW, RESET pin)
ESD Protection HBM >2000V
Paquete TSSOP-24 (4.4mm width)
Temperatura de funcionamiento -40 to +85 C

Características

  • 8 bidirectional I2C downstream channels
  • 1-to-8 multiplexing or 1-to-any combination switching
  • 3 address pins for up to 8 devices on same I2C bus
  • Active-low reset pin
  • Zero standby current when no channel selected

Aplicaciones

  • Multiple I2C sensors with same address
  • I2C bus voltage isolation
  • Capacitive touch screen multiplexing
  • Server and telecom I2C management

The TCA9548APWR from Texas Instruments is an 8-channel I2C switch and multiplexer that enables a single I2C master to communicate with up to 8 independent I2C bus segments. The primary use case is when multiple I2C slave devices share the same I2C address (a common issue with sensors, EEPROMs, and other peripherals) – by connecting each device to a separate downstream channel, the master can select one channel at a time via I2C commands, avoiding address conflicts. The TCA9548A can also be used to isolate I2C bus segments with different voltage levels (each downstream channel can operate at a different voltage, as the TCA9548A has level-shifting capability), or to manage I2C bus capacitance by splitting a large bus into smaller segments. The device operates as an I2C slave itself with a configurable address (set by the A0-A2 pins, supporting up to 8 TCA9548A devices on the same master bus, for a total of 64 downstream channels). To select a downstream channel, the master writes to the TCA9548A’s control register via I2C, setting the corresponding channel bit(s). Multiple channels can be selected simultaneously if needed. The active-low RESET pin provides a hardware method to deselect all channels. The bidirectional pass-gate switches on each channel support I2C Fast Mode (400kHz) with minimal propagation delay and no signal distortion. The device operates from 1.65V to 5.5V and is available in a TSSOP-24 package.

The TCA9548APWR operates as an 8-channel I2C bus switch controlled via I2C. Key subsystems include: (1) I2C Slave Interface – the TCA9548A appears as an I2C slave device on the upstream (master) bus; the 7-bit slave address is determined by the A0-A2 pins (base address 0x70 + A0-A2 setting); the master writes to the internal control register to select which downstream channels are connected; (2) Control Register – an 8-bit register where each bit corresponds to a downstream channel (bit 0 = channel 0, bit 7 = channel 7); when a bit is set to 1, the corresponding channel’s SDA/SCL switches are closed, connecting the downstream bus to the upstream bus; when 0, the channel is disconnected; multiple bits can be set simultaneously; (3) Pass-Gate Switches – each downstream channel has bidirectional pass-gate switches on both SDA and SCL lines; these switches are MOSFET pass transistors that conduct in both directions when enabled; when disabled, the downstream channel is completely isolated from the upstream bus; (4) Voltage Level Shifting – the TCA9548A can be powered from the upstream VCC, while each downstream channel operates at the voltage of its own pull-up supply; the pass gates accommodate voltage differences between channels; (5) Reset – the active-low RESET pin clears the control register to 0x00 (all channels deselected), providing a known state during system initialization or fault recovery.

Pin Nombre Función
1 A0 Address bit 0
2 A1 Address bit 1
3 A2 Address bit 2
4 VCC Supply voltage (1.65V to 5.5V)
5-12 SD0-SD7 Downstream SDA channels 0-7
13-20 SC0-SC7 Downstream SCL channels 0-7
21 GND Suelo
22 RESET Active-low reset (clears all channels)
23 SCL Upstream SCL (from master)
24 SDA Upstream SDA (from master)
  • 8 identical sensors: 8x BMP280 barometers (same 0x76 address) on separate channels, master selects one at a time
  • Voltage isolation: 3.3V MCU I2C master connects to both 1.8V and 5V downstream buses on separate channels
  • Capacitance management: split 400pF total bus capacitance into 8 x 50pF segments for reliable 400kHz operation
  • Server management: 8 I2C hardware monitoring ICs on different server blades accessed via one I2C master
Fabricante Número de pieza Paquete Notas
TI TCA9548ARVCR QFN-24 Smaller QFN package
NXP PCA9548APW TSSOP-24 NXP equivalent, similar function
TI TCA9545APWR TSSOP-24 4-channel version with interrupt
NXP PCA9547PW TSSOP-24 8-channel mux (1-of-8, not switch)
Recomendar piezas

UCC2804DTR

Current-mode PWM controller, 1MHz, 50% duty, 1A gate drive, soft start, SOIC-8, UC3842 pinout

Marca:

Paquete:

SOIC-8
En stock:
6500pcs

Ciclo de carga: 3~7 días
El pedido mínimo es de 1

Ir a la consulta

MAX3221EIPWR

Single-channel RS-232 transceiver, 3-5.5V, 250kbps, ±15kV ESD, auto-powerdown 1µA, TSSOP-16

Marca:

Paquete:

TSSOP-16
En stock:
8700pcs

Ciclo de carga: 3~7 días
El pedido mínimo es de 1

Ir a la consulta

TPA3106D1VFPR

40W mono Class-D audio amp, 10-26V, 92% efficiency, 4 gain settings, HLQFP-32 7x7mm

Marca:

Paquete:

HLQFP-32 (7x7mm) with exposed pad
En stock:
2100 piezas

Ciclo de carga: 3~7 días
El pedido mínimo es de 1

Ir a la consulta

LMV722MX

Dual op-amp, 10MHz GBW, 9nV/√Hz, RRIO, 930µA/ch, 2.2-5.5V, SOIC-8

Marca:

Paquete:

SOIC-8
En stock:
9400pcs

Ciclo de carga: 3~7 días
El pedido mínimo es de 1

Ir a la consulta

TS12A12511DCNR

SPDT analog switch, 5Ω Ron, negative signaling, 2.7-12V single/±6V dual, SOT-23-8, 93MHz BW

Marca:

Paquete:

SOT-23-8 (2.9 x 1.6 mm)
En stock:
5700pcs

Ciclo de carga: 3~7 días
El pedido mínimo es de 1

Ir a la consulta

TPS2557DRBR

Adjustable current-limit power switch, 0.5-5A, 22mΩ, 2.5-6.5V, active-high enable, VSON-8 3x3mm

Marca:

Paquete:

VSON-8 (3.0 x 3.0 mm)
En stock:
9200pcs

Ciclo de carga: 3~7 días
El pedido mínimo es de 1

Ir a la consulta
Garantía de calidad

Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.

1. Authorized & Genuine Sourcing Promise

All of our electronic components are procured from official authorized distributors and original manufacturers. We strictly reject counterfeits, refurbished parts, disassembled components and gray-market goods. Every product is guaranteed to be brand-new original parts and fully consistent with the original technical parameters. For branded products such as NXP IC series, we maintain complete supply channel documents to realize full product traceability.

2. Strict Full-batch Quality Inspection

We implement 100% full-batch quality control for all goods before shipment. Our professional QC team conducts multi-dimensional tests including appearance inspection, electrical parameter testing, performance verification and packaging check. Each batch of components is attached with complete inspection reports and batch records. We stick to zero-tolerance standards for defective products to ensure every piece of component meets industrial application requirements.

3. Industry Standard Compliance

Our products comply with a variety of international industry quality standards to adapt to high-standard application scenarios:
  • Electrónica del automóvil: All automotive-grade components pass AEC-Q series certification, featuring excellent stability and durability to adapt to complex vehicle operating environments.
  • Productos sanitarios: High-reliability components meet medical industry safety and compliance regulations, ensuring stable operation for medical equipment.
  • Industrial Control & Consumer Electronics: Products conform to universal international electronic industry standards, suitable for long-term continuous operation of various equipment.

4. Professional Reliability Control

For static-sensitive, moisture-sensitive and precision components such as ICs, PCBs, sensors and connectors, we carry out reliability screening in advance. Combined with standardized ESD anti-static packaging and vacuum moisture-proof packaging, we avoid component damage caused by static electricity, dampness or collision during storage and transportation, and retain the original performance of products.

5. Traceability Management System

We establish a complete product traceability system. Each batch of goods corresponds to independent batch number, sourcing record, inspection record and delivery record. Customers can query the whole lifecycle information of components at any time. This system effectively solves quality risks and facilitates after-sales handling and production quality control for your company.

6. After-sales Quality Guarantee

If any product is confirmed to have non-conformity quality problems due to our reasons after receipt, we provide free return, exchange and supplementary delivery services. Our professional quality team will also conduct root cause analysis to optimize our quality control process. We respond to quality feedback within 24 hours to resolve your worries efficiently.

Póngase en contacto con nosotros

If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:

 

Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China

 

Envíos y pagos

Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.

1. Payment Terms

We offer a variety of secure and convenient payment methods to meet diverse business cooperation needs. Details are as follows:
  1. Accepted Payment Methods
  • T/T (Bank Wire Transfer): The primary settlement method for bulk orders and a widely used international payment channel.
  • PayPal: Ideal for small orders, sample orders and quick payments.

  1. Settlement Currency

     

    US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.

  2. Bank Charges

     

    All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.

  3. Payment Requirements
  • Sample and small orders: Shipment will be arranged upon full payment.
  • In-stock bulk orders: Goods will be delivered within 2 to 3 working days after full payment.

2. Shipping & Delivery

We partner with leading global logistics providers to ensure safe and fast delivery worldwide. Relevant details are listed below:
  1. Logistics Partners
  • International Express: DHL, FedEx, UPS, TNT
  • Economy Logistics: Air freight and sea freight for large-volume cargo
  • Domestic Delivery: SF Express, Yunda Express
  1. Order Processing Time
  • In-stock items: Orders confirmed and fully paid before 14:00 (GMT+8) will be shipped on the same day. All other orders will be dispatched within 1 to 2 working days.
  • Out-of-stock or sourced items: The delivery lead time will be confirmed separately according to brand and inventory status.
  1. Estimated Transit Time
  • International Express: 3 – 7 working days globally
  • Air Freight: 7 – 12 working days
  • Sea Freight: 25 – 40 working days for heavy and large bulk cargo
  1. Shipping Fee Rules
  • Shipping cost is calculated based on package weight, volume, destination and delivery method.
  • Both freight prepaid and freight collect are available. Please provide your courier account number in advance if you choose freight collect.
  • Free international express delivery is offered for large orders. Terms for long-term partners can be negotiated separately.
  1. Shipment Tracking
     

    Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.

3. General Order Rules & Notes

  1. MOQ & Sample Service

     

    We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.

  2. Packaging Standard

     

    All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.

4. Customs & Liability Statement

  1. Import Duties & Taxes

     

    All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.

  2. Handling of Lost or Damaged Goods
  • In case of loss or severe damage during transit, please contact us within 48 hours after receiving the tracking information. We will assist you in filing a claim with the logistics provider.
  • We shall not be liable for any losses caused by incorrect delivery address, wrong contact information or the buyer’s refusal to complete customs clearance.

5. Local Pickup in Shenzhen

Local pickup service is available for customers in Shenzhen and surrounding areas:
  • Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong Province, China
  • Business Hours: 09:00 – 18:00, Monday to Friday. Closed on weekends and official public holidays.
  • Notice: Please make an appointment via email or communication tools one day in advance, and present your order information upon pickup.

Contact Information

Email: info@materialparts.com

Tel / WhatsApp: +86 13760382860

Servicio y embalaje

Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.

Core Services

1. One-stop Sourcing & BOM Support

We specialize in a full range of passive and active electronic components, including SMD resistors, power resistors, connectors, aviation connectors, LED beads, flexible circuit boards, printed circuit boards, and integrated circuits. Our professional team provides BOM list consolidation, component matching, and alternative model recommendation services. We support sample orders, small-batch trial production, and mass production orders with flexible MOQs to meet diverse procurement needs.

2. Genuine Product Guarantee & Full-process Quality Inspection

All products are sourced from official authorized channels and are 100% original genuine parts. Every batch of goods undergoes strict full-process quality inspection before delivery, with complete batch records and traceability documents provided. Our products comply with AEC-Q standards for automotive electronics and high-reliability specifications for medical devices. We eliminate counterfeits, refurbished parts and defective products from the source to secure your project production.

3. Fast Quotation & Order Processing

Our customer service team responds promptly to inquiries and quotation requests. All in-stock orders will be processed within one working day. We provide stocking reservation services for long-term cooperative customers, effectively solving problems such as component shortages and unstable supply chains.

4. Professional Technical Support

Our senior engineer team provides free technical consultation, model selection guidance and original manufacturer datasheets. We assist customers in solving problems related to product R&D, circuit design and component application, providing reliable technical support for project progress.

5. Sourcing for Special Components

Relying on our global supply chain network, we professionally source scarce components, obsolete parts and customized special components to efficiently solve your procurement difficulties.

6. Global Logistics & Document Services

We cooperate with mainstream international logistics providers including DHL, FedEx, UPS and TNT to achieve fast global delivery. We can provide complete export documents such as customs declaration files, commercial invoices and packing lists to ensure smooth customs clearance for international shipments. Local pickup is also available for customers in Shenzhen, China.

Professional Packaging Standards

Electronic components are sensitive to static electricity, collision, moisture and dust. We adopt industry-standard anti-static packaging solutions to fully ensure the integrity of goods during transportation and storage.

1. General Packaging Specifications

  • All components are packed separately to avoid damage caused by friction and collision;
  • Shockproof buffer materials are added for fragile products to ensure transportation safety;
  • Each package is clearly marked with part number, quantity, batch number and specifications for easy inventory counting and management.

2. Classified Professional Packaging

  • Anti-static Packaging: Static-sensitive components such as chips, circuit boards and sensors are packaged with anti-static bags, shielding boxes and conductive foam in strict accordance with international anti-static standards to prevent static damage.
  • Vacuum Moisture-proof Packaging: Moisture-sensitive components are vacuum-sealed with desiccants to isolate humid air, suitable for ocean transportation and long-term storage.
  • Original Factory Packaging: Integrated circuits of brands such as NXP are delivered with original reels, trays or tubes by default, retaining complete original packaging and adapting to automated SMT production lines.
  • Discrete Device Packaging: Discrete devices such as SMD resistors, power resistors and LEDs are quantitatively and classifiedly packaged with accurate quantity and clear marking.
  • Connector / Aviation Connector Packaging: Hard outer packaging is adopted to prevent pin bending and structural deformation.

3. Custom Packaging Services

We provide value-added services including personalized packaging, custom labeling and re-reeling according to customer requirements, fully matching your production and warehouse management standards.

Contact Information

For service consultation or packaging customization, please feel free to contact us:
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
 

Online Inquiry Form

Support Excel, PDF, CSV format files for full BOM list quotation

Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.

Empresa
perspectivas
Industrias
Todos los productos
Circuitos integrados
Dispositivos C&I
Discreto
Chips de memoria
MPU y MCU