Inicio > Circuitos integrados IC > 10M02SCU169C8G

10M02SCU169C8G

MAX 10 FPGA, 2000 LE, 108Kb RAM, instant-on flash, single 3.3V supply, 169-pin BGA

6012

Inventario efectivo

Ir a la consulta

Image for reference only

Pieza del fabricante：

10M02SCU169C8G

Paquete：

169-pin FineLine BGA (11 x 11 mm, 0.8mm pitch)

Descripción

Productos

The 10M02SCU169C8G from Intel (formerly Altera) is a member of the MAX 10 FPGA family, a low-cost, single-supply, instant-on FPGA based on non-volatile flash technology. This device features 2,000 logic elements (LEs), 108 Kb of embedded memory, and operates from a single 3.3V supply without requiring an external configuration device. Housed in a 169-pin FineLine BGA package, it supports features including dual-boot configuration, on-chip flash for user data, and a built-in oscillator.

Especificaciones

Logic Elements	2,000
Embedded Memory	108 Kb M9K blocks
Maximum User I/O	84
PLLs	1
Core Voltage	1.2V (internal regulator)
I/O Voltage	3.3V (single supply operation)
Configuración	On-chip flash (instant-on)
Temperatura de funcionamiento	0 to 70°C (C-speed grade)
Paquete	169-pin FineLine BGA (11x11mm)

Características

Non-volatile flash-based FPGA – instant-on, no external configuration device needed
Single 3.3V supply operation with on-chip voltage regulator
Dual-boot configuration support for firmware updates
On-chip user flash memory for non-volatile data storage
1 PLL for clock management and frequency synthesis
10-bit 1Msps ADC available in select variants
Supports Intel Quartus Prime design software

Aplicaciones

Glue logic and CPLD replacement in system designs
IO expansion and protocol bridging
Industrial control and motor interface logic
Automotive body controller applications
Low-cost FPGA prototyping and education

Introducción del producto:10M02SCU169C8G Presentación del producto

The 10M02SCU169C8G is the smallest member of Intel’s MAX 10 FPGA family, offering 2,000 logic elements in a non-volatile, instant-on architecture. Unlike traditional SRAM-based FPGAs that require external configuration devices, the MAX 10 integrates on-chip flash memory for configuration storage, enabling power-on instant-on operation within milliseconds. The single 3.3V supply simplifies PCB design by eliminating the need for multiple voltage rails. With 108 Kb of embedded memory, 1 PLL, and up to 84 user I/Os, this device bridges the gap between CPLDs and larger FPGAs, offering reconfigurable logic at a competitive price point.

Principio de funcionamiento:10M02SCU169C8G Principio de funcionamiento

The MAX 10 FPGA uses a non-volatile flash-based configuration architecture. At power-up, the on-chip flash memory automatically loads the configuration bitstream into the SRAM-based logic array, enabling instant-on operation without an external configuration controller. The core logic fabric consists of Logic Array Blocks (LABs) containing 10 Logic Elements (LEs) each, where each LE contains a 4-input look-up table (LUT), a register, and carry/chain logic. The embedded M9K memory blocks can be configured as RAM, ROM, or FIFO buffers. A single PLL generates internal clock signals from an external reference. The on-chip voltage regulator converts the 3.3V I/O supply to the 1.2V core voltage, simplifying the power supply design.

Descripción de la clavija:10M02SCU169C8G Definición y funciones de las clavijas

Grupo Pin	Cuenta	Tipo	Función
VCCIO	8	Potencia	I/O bank supply (3.3V)
VCCINT	4	Potencia	Core supply (3.3V input, internal regulation to 1.2V)
GND	12	Suelo	Referencia del suelo
I/O Pins	84	E/S	General-purpose user I/O
CLK	4	Entrada	Dedicated clock input pins
JTAG	4	E/S	TCK, TMS, TDI, TDO for JTAG programming
CONF_HECHO	1	E/S	Configuration status
INIT_DONE	1	E/S	Initialization status

Application Scenarios:In which products and applications is10M02SCU169C8G usado

CPLD replacement for glue logic and address decoding in embedded systems
IO expansion and protocol bridging between different bus standards
Motor control and sensor interface logic in industrial automation
Automotive body electronics requiring instant-on and low power standby
Low-cost FPGA prototyping and educational development boards

Alternative Models:What chips are recommended as replacements for 10M02SCU169C8G

Fabricante	Número de pieza	Paquete	Notas
Intel	10M04SCU169C8G	169-BGA	4000 LE, same package, pin-compatible upgrade
Intel	10M02SCU169I7G	169-BGA	Industrial temp (-40 to 100°C)
Lattice	LCMXO2-1200HC-4TG100C	TQFP-100	1280 LUT, instant-on, 3.3V
Microchip	ICE40LP1K-CM36	caBGA-36	1280 LUT, ultra-small package
Gowin	GW1N-4	QFN-48	3328 LUT, flash-based, low cost