الصفحة الرئيسية > الدوائر المتكاملة الدوائر المتكاملة > TLE9263-3BQX

TLE9263-3BQX

Mid-Range+ SBC, 1xCAN FD+PN, 2xLIN, 3x LDO, 4x HS output, 15μA sleep, VQFN-48

0

المخزون الفعال
انتقل إلى الاستفسار

Image for reference only

جزء الشركة المصنعة ： جزء الشركة المصنعة

TLE9263-3BQX

الحزمة ： الحزمة

VQFN-48 (7 x 7 x 0.9 mm) with LTI

العلامة التجارية ： العلامة التجارية
فئات المنتجات:：فئات المنتجات
الالتزام بالجودة
الشحن والدفع
الخدمة والتغليف
دليل المنتج
توصيات أخرى قد تكون مهتماً بها.

RK73B2ETTD132J

RK73B2BTTD151J

C0805C221J5GAC

C0603C101K5GAC

BTS5120-2EKA

BTS5180-2EKA

RK73H1JTTD6343F

RK73H1JTTD2003F

الوصف

نظرة عامة على المنتج

The TLE9263-3BQX is an Infineon OPTIREG™ Mid-Range+ System Basis Chip (SBC) with 1x CAN FD transceiver (with Partial Networking), 2x LIN transceivers, 3 voltage regulators (5V/250mA, 5V/100mA, external PNP driver), 4 high-side outputs, and 16-bit SPI interface. The highest-featured member of the TLE926x mid-range family, designed for automotive CAN-LIN body and comfort modules.

المواصفات الرئيسية

CAN Transceiver 1x CAN FD (ISO 11898-2:2016), up to 5Mbps, Partial Networking
LIN Transceivers 2x LIN 2.2a / J2602 with TXD timeout
VCC1 (Main LDO) 5V / 250mA
VCC2 (Sensor LDO) 5V / 100mA (off-board protected)
VCC3 (External PNP Driver) 5V or 3.3V / up to 400mA (with external PNP)
High-Side Outputs 4 x 150mA (7Ω typ.)
Sleep Mode Current 15μA (typical)
Stop Mode Current 44μA (typical)
Wake Sources CAN, LIN, Wake pins, Cyclic wake
درجة حرارة التشغيل -40°C to +150°C
المؤهلات AEC-Q100

الميزات

  • OPTIREG™ Mid-Range+ SBC family (software compatible across TLE926x/TLE927x)
  • CAN FD with Partial Networking and FD tolerant mode
  • 2x LIN transceivers (LIN 2.2a / J2602) with configurable TXD timeout
  • Three voltage regulators (2 internal LDO + 1 external PNP driver)
  • 4 high-side outputs with 7Ω typ. on-resistance
  • 2 configurable HV GPIOs
  • 3 HV wake inputs with voltage level monitoring
  • Configurable timeout/window watchdog with reset
  • Cyclic wake and cyclic sense in all low-power modes
  • Up to 3 fail outputs
  • 16-bit SPI for control and diagnostics
  • VQFN-48 (7x7mm) with LTI feature for AOI

التطبيقات

  • Seat control modules with CAN and LIN
  • Smart power closure systems (door, tailgate)
  • HVAC control modules
  • Automotive PDU (power distribution unit)
  • Fuel-cell control units (FCCU)

The TLE9263-3BQX is an Infineon OPTIREG™ Mid-Range+ System Basis Chip (SBC) integrating one CAN FD transceiver with Partial Networking, two LIN 2.2a transceivers, three voltage regulators (5V/250mA main LDO, 5V/100mA sensor LDO, and external PNP transistor driver), four 150mA high-side outputs, and a 16-bit SPI interface. With 15μA sleep mode current, configurable watchdog, cyclic wake/sense, and both CAN and LIN wake capability, it is the most feature-rich member of the TLE926x family for automotive seat, door, HVAC, and PDU applications. Software compatible across the entire TLE926x and TLE927x SBC family.

The TLE9263-3BQX integrates power management, dual-bus communication (CAN + 2x LIN), and diagnostic functions into a single SBC. The main LDO (VCC1) provides 5V/250mA for MCU supply. The sensor LDO (VCC2) provides 5V/100mA with off-board protection. The external PNP driver (VCC3) supports standalone or load-sharing mode. The CAN FD transceiver supports up to 5Mbps with Partial Networking for selective wake. The two LIN transceivers support LIN 2.2a/J2602 with configurable TXD timeout for bus stuck-dominant protection and LIN Flash mode for fast reprogramming. The state machine manages SBC modes (Normal, Stop, Sleep, Restart, Fail-Safe). All three communication channels (CAN, LIN1, LIN2) can serve as wake sources from Stop and Sleep modes. The 4 high-side outputs and 2 GPIOs provide flexible peripheral control. The 16-bit SPI provides complete configuration and diagnostic access.

مجموعة الدبوس Mnemonic الوصف
1-4 VIN/GND Battery supply and ground
5-8 CANH/CANL/TXD/RXD CAN bus and MCU interface
9-14 LIN1/LIN2 Dual LIN bus transceiver pins
15-20 SPI 16-bit SPI interface
21-24 VCC1/VCC2 LDO outputs
25-28 HS1-HS4 4 high-side switch outputs
29-34 WK1-WK3 3 HV wake inputs
35-48 FO/GPIO/VCC3 Fail outputs, GPIO, external PNP driver
  • Seat control module with CAN + 2x LIN for multi-motor seat adjustment and memory
  • Smart door closure module with CAN FD + LIN bus and 4 high-side outputs
  • HVAC control with CAN FD, 2x LIN for zone actuators, and external PNP 3.3V supply
  • Automotive PDU with CAN FD Partial Networking selective wake and 15μA sleep
  • Fuel-cell control unit with CAN-LIN SBC, watchdog, and fail-safe outputs
الطراز الشركة المصنعة الفرق الرئيسي
TLE9261-3BQX إنفينيون Same without LIN transceivers
TLE9262-3BQX إنفينيون Same with 1x LIN (not 2x)
TLE9278BQX إنفينيون 4x CAN FD, SMPS buck, high-end SBC
TJA1145T NXP Single CAN SBC, no LIN
NXP S32K + SBC combo NXP MCU with integrated SBC
قطع الغيار الموصى بها

RK73B2ETTD132J

1.3kOhm 0.5W thick film chip resistor, 1210 package, ±5%, ±200ppm/°C, AEC-Q200 automotive grade

العلامة التجارية:

الحزمة:

1210 (3225 Metric) 3.2 x 2.6 x 0.6 mm
متوفر في المخزون:
6581pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

RK73B2BTTD151J

AEC-Q200 150Ω 5% 0.25W thick film resistor, 1206, ±200ppm/°C, moisture-resistant

العلامة التجارية:

الحزمة:

1206 (3216 Metric, 3.20 x 1.60 x 0.60 mm)
متوفر في المخزون:
21472pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

C0805C221J5GAC

220pF 50V C0G(NP0) ±5% MLCC, 0805, KEMET C series, ultra-stable, AEC-Q200 avail

العلامة التجارية:

الحزمة:

0805 (2012 Metric, 2.01 x 1.25 x 0.78 mm)
متوفر في المخزون:
508000pcs

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

C0603C101K5GAC

100pF 50V C0G(NP0) ±10% MLCC, 0603, KEMET C series, ultra-stable Class I

العلامة التجارية:

الحزمة:

0603 (1608 Metric, 1.60 x 0.80 x 0.80 mm)
متوفر في المخزون:
0 قطعة

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

BTS5120-2EKA

AEC-qualified dual 120mΩ smart high-side switch, 2.5A/ch, kILIS=550, PROFET+ 12V, DSO-14-40 EP

العلامة التجارية:

الحزمة:

PG-DSO-14-40 EP (8.65 x 3.9 x 1.47 mm, exposed pad)
متوفر في المخزون:
0 قطعة

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار

BTS5180-2EKA

AEC-qualified dual 180mΩ smart high-side switch, 2A/ch, kILIS=550, PROFET+ 12V, DSO-14-40 EP

العلامة التجارية:

الحزمة:

PG-DSO-14-40 EP (8.65 x 3.9 x 1.47 mm, exposed pad)
متوفر في المخزون:
0 قطعة

دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1

انتقل إلى الاستفسار
ضمان الجودة

Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.

1. Authorized & Genuine Sourcing Promise

All of our electronic components are procured from official authorized distributors and original manufacturers. We strictly reject counterfeits, refurbished parts, disassembled components and gray-market goods. Every product is guaranteed to be brand-new original parts and fully consistent with the original technical parameters. For branded products such as NXP IC series, we maintain complete supply channel documents to realize full product traceability.

2. Strict Full-batch Quality Inspection

We implement 100% full-batch quality control for all goods before shipment. Our professional QC team conducts multi-dimensional tests including appearance inspection, electrical parameter testing, performance verification and packaging check. Each batch of components is attached with complete inspection reports and batch records. We stick to zero-tolerance standards for defective products to ensure every piece of component meets industrial application requirements.

3. Industry Standard Compliance

Our products comply with a variety of international industry quality standards to adapt to high-standard application scenarios:
  • إلكترونيات السيارات: All automotive-grade components pass AEC-Q series certification, featuring excellent stability and durability to adapt to complex vehicle operating environments.
  • الأجهزة الطبية: High-reliability components meet medical industry safety and compliance regulations, ensuring stable operation for medical equipment.
  • Industrial Control & Consumer Electronics: Products conform to universal international electronic industry standards, suitable for long-term continuous operation of various equipment.

4. Professional Reliability Control

For static-sensitive, moisture-sensitive and precision components such as ICs, PCBs, sensors and connectors, we carry out reliability screening in advance. Combined with standardized ESD anti-static packaging and vacuum moisture-proof packaging, we avoid component damage caused by static electricity, dampness or collision during storage and transportation, and retain the original performance of products.

5. Traceability Management System

We establish a complete product traceability system. Each batch of goods corresponds to independent batch number, sourcing record, inspection record and delivery record. Customers can query the whole lifecycle information of components at any time. This system effectively solves quality risks and facilitates after-sales handling and production quality control for your company.

6. After-sales Quality Guarantee

If any product is confirmed to have non-conformity quality problems due to our reasons after receipt, we provide free return, exchange and supplementary delivery services. Our professional quality team will also conduct root cause analysis to optimize our quality control process. We respond to quality feedback within 24 hours to resolve your worries efficiently.

اتصل بنا

If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:

 

Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China

 

الشحن والدفع

Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.

1. Payment Terms

We offer a variety of secure and convenient payment methods to meet diverse business cooperation needs. Details are as follows:
  1. Accepted Payment Methods
  • T/T (Bank Wire Transfer): The primary settlement method for bulk orders and a widely used international payment channel.
  • PayPal: Ideal for small orders, sample orders and quick payments.

  1. Settlement Currency

     

    US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.

  2. Bank Charges

     

    All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.

  3. Payment Requirements
  • Sample and small orders: Shipment will be arranged upon full payment.
  • In-stock bulk orders: Goods will be delivered within 2 to 3 working days after full payment.

2. Shipping & Delivery

We partner with leading global logistics providers to ensure safe and fast delivery worldwide. Relevant details are listed below:
  1. Logistics Partners
  • International Express: DHL, FedEx, UPS, TNT
  • Economy Logistics: Air freight and sea freight for large-volume cargo
  • Domestic Delivery: SF Express, Yunda Express
  1. Order Processing Time
  • In-stock items: Orders confirmed and fully paid before 14:00 (GMT+8) will be shipped on the same day. All other orders will be dispatched within 1 to 2 working days.
  • Out-of-stock or sourced items: The delivery lead time will be confirmed separately according to brand and inventory status.
  1. Estimated Transit Time
  • International Express: 3 – 7 working days globally
  • Air Freight: 7 – 12 working days
  • Sea Freight: 25 – 40 working days for heavy and large bulk cargo
  1. Shipping Fee Rules
  • Shipping cost is calculated based on package weight, volume, destination and delivery method.
  • Both freight prepaid and freight collect are available. Please provide your courier account number in advance if you choose freight collect.
  • Free international express delivery is offered for large orders. Terms for long-term partners can be negotiated separately.
  1. Shipment Tracking
     

    Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.

3. General Order Rules & Notes

  1. MOQ & Sample Service

     

    We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.

  2. Packaging Standard

     

    All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.

4. Customs & Liability Statement

  1. Import Duties & Taxes

     

    All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.

  2. Handling of Lost or Damaged Goods
  • In case of loss or severe damage during transit, please contact us within 48 hours after receiving the tracking information. We will assist you in filing a claim with the logistics provider.
  • We shall not be liable for any losses caused by incorrect delivery address, wrong contact information or the buyer’s refusal to complete customs clearance.

5. Local Pickup in Shenzhen

Local pickup service is available for customers in Shenzhen and surrounding areas:
  • Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong Province, China
  • Business Hours: 09:00 – 18:00, Monday to Friday. Closed on weekends and official public holidays.
  • Notice: Please make an appointment via email or communication tools one day in advance, and present your order information upon pickup.

Contact Information

Email: info@materialparts.com

Tel / WhatsApp: +86 13760382860

الخدمة والتغليف

Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.

Core Services

1. One-stop Sourcing & BOM Support

We specialize in a full range of passive and active electronic components, including SMD resistors, power resistors, connectors, aviation connectors, LED beads, flexible circuit boards, printed circuit boards, and integrated circuits. Our professional team provides BOM list consolidation, component matching, and alternative model recommendation services. We support sample orders, small-batch trial production, and mass production orders with flexible MOQs to meet diverse procurement needs.

2. Genuine Product Guarantee & Full-process Quality Inspection

All products are sourced from official authorized channels and are 100% original genuine parts. Every batch of goods undergoes strict full-process quality inspection before delivery, with complete batch records and traceability documents provided. Our products comply with AEC-Q standards for automotive electronics and high-reliability specifications for medical devices. We eliminate counterfeits, refurbished parts and defective products from the source to secure your project production.

3. Fast Quotation & Order Processing

Our customer service team responds promptly to inquiries and quotation requests. All in-stock orders will be processed within one working day. We provide stocking reservation services for long-term cooperative customers, effectively solving problems such as component shortages and unstable supply chains.

4. Professional Technical Support

Our senior engineer team provides free technical consultation, model selection guidance and original manufacturer datasheets. We assist customers in solving problems related to product R&D, circuit design and component application, providing reliable technical support for project progress.

5. Sourcing for Special Components

Relying on our global supply chain network, we professionally source scarce components, obsolete parts and customized special components to efficiently solve your procurement difficulties.

6. Global Logistics & Document Services

We cooperate with mainstream international logistics providers including DHL, FedEx, UPS and TNT to achieve fast global delivery. We can provide complete export documents such as customs declaration files, commercial invoices and packing lists to ensure smooth customs clearance for international shipments. Local pickup is also available for customers in Shenzhen, China.

Professional Packaging Standards

Electronic components are sensitive to static electricity, collision, moisture and dust. We adopt industry-standard anti-static packaging solutions to fully ensure the integrity of goods during transportation and storage.

1. General Packaging Specifications

  • All components are packed separately to avoid damage caused by friction and collision;
  • Shockproof buffer materials are added for fragile products to ensure transportation safety;
  • Each package is clearly marked with part number, quantity, batch number and specifications for easy inventory counting and management.

2. Classified Professional Packaging

  • Anti-static Packaging: Static-sensitive components such as chips, circuit boards and sensors are packaged with anti-static bags, shielding boxes and conductive foam in strict accordance with international anti-static standards to prevent static damage.
  • Vacuum Moisture-proof Packaging: Moisture-sensitive components are vacuum-sealed with desiccants to isolate humid air, suitable for ocean transportation and long-term storage.
  • Original Factory Packaging: Integrated circuits of brands such as NXP are delivered with original reels, trays or tubes by default, retaining complete original packaging and adapting to automated SMT production lines.
  • Discrete Device Packaging: Discrete devices such as SMD resistors, power resistors and LEDs are quantitatively and classifiedly packaged with accurate quantity and clear marking.
  • Connector / Aviation Connector Packaging: Hard outer packaging is adopted to prevent pin bending and structural deformation.

3. Custom Packaging Services

We provide value-added services including personalized packaging, custom labeling and re-reeling according to customer requirements, fully matching your production and warehouse management standards.

Contact Information

For service consultation or packaging customization, please feel free to contact us:
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
 

Online Inquiry Form

Support Excel, PDF, CSV format files for full BOM list quotation

Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.

الشركة
الرؤى
الصناعات
جميع المنتجات
الدوائر المتكاملة
أجهزة C&I
منفصلة
رقائق الذاكرة
وحدات MPUs و MCUs