الصفحة الرئيسية > الدوائر المتكاملة الدوائر المتكاملة > 74LVC1G17GW

74LVC1G17GW

Single Schmitt trigger buffer, 1.65-5.5V, ±32mA drive, overvoltage tolerant, TSSOP5

8521

المخزون الفعال

انتقل إلى الاستفسار

Image for reference only

جزء الشركة المصنعة ： جزء الشركة المصنعة

74LVC1G17GW

الحزمة ： الحزمة

TSSOP5 / SOT353-1 (2.0 x 1.25 x 0.95 mm)

الوصف

نظرة عامة على المنتج

The 74LVC1G17GW from Nexperia is a single Schmitt trigger buffer in a TSSOP5 (SOT353-1) package. It features a wide supply voltage range of 1.65 V to 5.5 V, overvoltage-tolerant inputs up to 5.5 V, and ±32 mA output drive capability. The Schmitt trigger input provides high noise immunity and converts slowly changing input signals into clean, sharply defined output transitions, making it ideal for signal conditioning in mixed-voltage systems.

المواصفات الرئيسية

Logic Function	Single Schmitt Trigger Buffer (non-inverting)
Supply Voltage (VCC)	1.65 فولت إلى 5.5 فولت
Input Voltage Tolerance	Up to 5.5 V (overvoltage tolerant)
Output Drive Current	±32 mA at VCC = 3.0 V
تأخير الانتشار	Typ. 5.5 ns at VCC = 3.3 V
Maximum Frequency	175 MHz
تيار التهدئة	10 µA (typical)
الحزمة	TSSOP5 (SOT353-1), 2.0 x 1.25 mm
درجة حرارة التشغيل	-40 درجة مئوية إلى +125 درجة مئوية
ESD Protection	HBM > 2000 V, CDM > 1000 V
IOFF Support	Yes (partial power-down isolation)

الميزات

Wide supply voltage range: 1.65 V to 5.5 V for versatile voltage operation
Overvoltage tolerant inputs up to 5.5 V enable mixed 3.3 V / 5 V translation
Schmitt trigger action provides high noise immunity and unlimited input rise/fall times
IOFF circuitry prevents damaging backflow current during partial power-down
±32 mA output drive capability for direct interface with TTL and CMOS levels
Latch-up performance exceeds 250 mA per JEDEC standard
Complies with JEDEC standards: JESD8-7, JESD8-5, JESD8C, JESD36
ESD protection: HBM Class 2 (> 2000 V), CDM Class C3 (> 1000 V)

التطبيقات

Signal conditioning for noisy or slowly changing input signals
Voltage level translation between 3.3 V and 5 V logic domains
Input signal squaring for microcontroller and FPGA interfaces
Industrial automation sensor signal buffering
Push-button debounce and waveform shaping circuits

مقدمة المنتج:74LVC1G17GW مقدمة المنتج

The 74LVC1G17GW is a single Schmitt trigger buffer manufactured by Nexperia in a compact TSSOP5 (SOT353-1) package. The device provides non-inverting buffer action with Schmitt trigger inputs that deliver high noise immunity by converting slowly changing or noisy input signals into clean, well-defined output transitions. The wide supply voltage range of 1.65 V to 5.5 V combined with overvoltage-tolerant inputs (up to 5.5 V) makes it an excellent choice for voltage level translation in mixed 3.3 V and 5 V environments. The IOFF circuitry ensures safe partial power-down operation by disabling the output and preventing backflow current when the device is powered down. With ±32 mA output drive at 3.0 V and propagation delay of typically 5.5 ns, this buffer is suitable for high-speed signal conditioning applications.

مبدأ العمل:74LVC1G17GW مبدأ العمل

The 74LVC1G17GW operates as a non-inverting buffer with Schmitt trigger input stage consisting of two key subsystems: (1) Schmitt Trigger Input — The input stage incorporates two distinct threshold voltage levels: a higher threshold (VT+) for rising input signals and a lower threshold (VT-) for falling input signals. This hysteresis (VT+ minus VT-) provides noise immunity by ensuring the output does not oscillate or switch erratically when the input signal is near the switching point or has slow edge rates. The input can be driven from either 3.3 V or 5 V sources regardless of the device supply voltage, enabling bidirectional voltage translation. (2) Output Buffer Stage — A CMOS push-pull output stage delivers ±32 mA drive current at 3.0 V supply, capable of directly interfacing with TTL and CMOS logic levels. The IOFF circuit isolates the output when VCC is at ground potential, preventing parasitic current paths in partial power-down scenarios. The device supports unlimited input rise and fall times due to the Schmitt trigger action.

وصف الدبوس:74LVC1G17GW تعريف الدبوس ووظائفه

دبوس	الاسم	النوع	الوظيفة
1	A	المدخلات	Schmitt trigger data input; overvoltage tolerant to 5.5 V
2	GND	أرضي	Common ground reference
3	نورث كارولاينا	No Connect	Not internally connected; leave floating or tie to GND
4	Y	المخرجات	Buffered Schmitt trigger output; CMOS push-pull
5	VCC	الطاقة	Positive supply voltage (1.65 V to 5.5 V)

Application Scenarios:In which products and applications is74LVC1G17GW مستعمل

Signal conditioning: converting slow, noisy, or distorted input waveforms into clean digital signals for MCU/FPGA interfaces
Voltage level translation: bridging 3.3 V and 5 V logic domains without additional level shifters
Sensor interface buffering: squaring analog sensor outputs (thermistors, photodiodes) for digital processing
Push-button debounce: Schmitt trigger hysteresis eliminates contact bounce in mechanical switches
Industrial I/O protection: overvoltage tolerant inputs and IOFF isolation protect downstream circuitry

Alternative Models:What chips are recommended as replacements for 74LVC1G17GW

الشركة المصنعة	رقم الجزء	الحزمة	الملاحظات
نيكسبيريا	74LVC1G17GV	TSOP5 (SOT753)	Same function, wider TSOP5 package
نيكسبيريا	74LVC1G17GM	XSON6 (SOT886)	Leadless package, smaller footprint
تكساس إنسترومنتس	SN74LVC1G17DBVR	SOT-23-5	Pin-compatible Schmitt trigger buffer
أونسمي	NC7SZ17P5X	SOT-23-5	Single Schmitt buffer, 1.65-5.5V
شركة ديودز	74LVC1G17DW-7	SOT-363	Equivalent function, Diodes Inc brand
نيكسبيريا	74HC1G17GW	TSSOP5	HC variant, 2.0-6.0V supply range