Image for reference only
PE43711B-Z
QFN-24 (4x4mm)
The PE43711B-Z from pSemi (Murata) is a 7-bit 31.75dB RF digital step attenuator with 0.25dB steps, 9kHz-6GHz frequency range, and high linearity in QFN-24.
| الحزمة | QFN-24 (4x4mm) |
The PE43711B-Z from pSemi (Murata) is a 7-bit 31.75dB RF digital step attenuator with 0.25dB steps, 9kHz-6GHz frequency range, and high linearity in QFN-24.
The PE43711B-Z is a 7-bit RF digital step attenuator from pSemi (Murata) in QFN-24, covering 9kHz to 6GHz with 0.25dB step size and 31.75dB total attenuation range. It uses a reflective architecture with CMOS switches to select between a through-path and attenuator pads. The 7-bit control provides 128 attenuation states (0dB to 31.75dB in 0.25dB steps). The internal RF path consists of cascaded pi-attenuator sections: 0.25dB, 0.5dB, 1dB, 2dB, 4dB, 8dB, 16dB, each independently switched. The insertion loss is 1.0dB at 2GHz and 1.8dB at 6GHz. The attenuation accuracy is +/-0.1dB typical at low frequencies, degrading to +/-0.5dB at 6GHz. The device supports both SPI serial control (CLK, SDI, LE) and parallel control (D0-D7, P/S=HIGH). In SPI mode, a 24-bit word (7 data bits + control) is shifted in on SDI and latched on LE rising edge. The SDO output enables daisy-chaining multiple devices. The switching speed is 500ns typical. The RF input power handling is +27dBm (500mW) at 3.3V. The device draws 2uA in static state and 100uA during switching. The B-Z suffix specifies lead-free, tape-and-reel.
| دبوس | الاسم | النوع | الوظيفة |
|---|---|---|---|
| 1 | VDD | الطاقة | Supply (3.3V +/-5%) |
| 2 | GND | الطاقة | أرضي |
| 3 | CLK | المدخلات | SPI clock (up to 50MHz) |
| 4 | جنيه مصري | المدخلات | SPI latch enable (rising edge latches data) |
| 5 | SDI | المدخلات | SPI data input |
| 6 | SDO | المخرجات | SPI data output (daisy-chain) |
| 7 | P/S | المدخلات | Parallel/serial mode select (HIGH=parallel) |
| 8-15 | D0-D7 | المدخلات | Parallel control data (unused in SPI mode) |
| 16-23 | RF2/RF1/C1-C6 | RF | RF ports and bypass capacitors |
| الشركة المصنعة | رقم الجزء | الحزمة | الملاحظات |
|---|---|---|---|
| pSemi | PE43703A-Z | QFN-24 | 7-bit 0.5dB step, 9kHz-6GHz |
| pSemi | PE43712A-Z | QFN-24 | 7-bit 0.25dB step, 9kHz-8GHz, higher frequency |
| الأجهزة التناظرية | HMC1119 | QFN-24 | 7-bit 0.25dB step, DC-6GHz, 31.75dB range |
| كورفو | CMD248P3 | QFN-16 | 6-bit digital attenuator, DC-6GHz, 31.5dB range |
| الأجهزة التناظرية | HMC306AMS10E | QSOP-24 | 6-bit attenuator, DC-4GHz, external resistor |
العلامة التجارية:
الحزمة:
دورة الشحن 3 ~ 7 أيام
الحد الأدنى للطلب هو 1
English English 
简体中文
Español
العربية
Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.
If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.
Settlement Currency
US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.
Bank Charges
All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.
Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.
MOQ & Sample Service
We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.
Packaging Standard
All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.
Import Duties & Taxes
All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.
Email: info@materialparts.com
Tel / WhatsApp: +86 13760382860
Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.
Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.
