BCM6318KMMLG

Product Overview The BCM6318KMMLG from Broadcom is an ultra-low-cost ADSL2+ modem system-on-chip designed for entry-level DSL routers and gateways in emerging markets. It integrates the ADSL2+ transceiver, network processor, and peripheral interfaces in a single BGA package for minimal BOM cost. Key Specifications Type ADSL2+ Modem SoC DSL Standard ADSL2+ (G.992.5) Data Rate Up to […]

BCM43217KMLG

Product Overview The BCM43217KMLG from Broadcom is an ultra-low-cost 2×2 802.11n single-band Wi-Fi RF transceiver with integrated Bluetooth. Operating in the 2.4 GHz band, it delivers up to 150 Mbps data rate via SDIO/SPI host interface, targeting cost-sensitive IoT and mobile applications. Key Specifications Wi-Fi Standard 802.11 b/g/n Band 2.4 GHz single-band MIMO 2×2 Max […]

INMP621ACEZ-R7

Product Overview The INMP621ACEZ-R7 from InvenSense (TDK) is a wide dynamic range MEMS microphone with PDM digital output, achieving 133 dB SPL acoustic overload point and 65 dBA SNR. In a 4 x 3 x 1 mm LGA package, it delivers studio-quality audio capture for voice recognition, conferencing, and high-SPL recording applications. Key Specifications Type […]

AD2428WCCSZ-RL

Product Overview The AD2428WCCSZ-RL from Analog Devices is an Automotive Audio Bus (A2B) transceiver IC that provides a low-latency, high-bandwidth digital audio network for automotive applications. As a main or subordinate node, it enables daisy-chain connectivity of multiple audio peripherals over a single unshielded twisted-pair cable. Key Specifications Type A2B (Automotive Audio Bus) Transceiver Data […]

TAS6424MQDKQRQ1

Product Overview The TAS6424MQDKQRQ1 from Texas Instruments is an AEC-Q100 qualified 4-channel Class-D digital-input audio amplifier for automotive applications. Delivering 75W per channel into 4 Ohm from 25V supply, it features I2S/TDM digital input, I2C diagnostics, and comprehensive load fault detection including open/short circuit and output-to-battery shorts. Key Specifications Channels 4 BTL (or parallel PBTL) […]

ADSP-BF522BBCZ-3A

Product Overview The ADSP-BF522BBCZ-3A from Analog Devices is a 300 MHz Blackfin embedded processor in a 208-ball CSPBGA package. Featuring 132 kB on-chip SRAM, 32 kB ROM, and rich peripherals including SPORT, SPI, UART, TWI, and USB, it targets signal processing and control applications requiring deterministic real-time performance. Key Specifications Core Blackfin (dual-MAC, 40-bit ALU) […]

MP8049SDU-LF-Z

Product Overview The MP8049SDU-LF-Z from Monolithic Power Systems is a quad power half-bridge driver IC capable of delivering up to 5.5 A per channel from a 5-26 V supply. Configurable as dual full-bridge or quad half-bridge, it serves as the output stage for Class-D audio amplifiers and motor drives with integrated overcurrent, overtemperature, and undervoltage […]

MPZ2012S300AT000

Product Overview The MPZ2012S300AT000 from TDK is a multilayer ferrite bead for power line noise suppression, featuring 30 Ohm impedance at 100 MHz with 6 A rated current and only 10 mOhm DC resistance in a 0805 (2012 metric) package. It is part of TDK’s MPZ power-line ferrite bead series, optimized for high-current applications requiring […]

TA1423B

Product Overview The TA1423B is a power management integrated circuit, typically a switching controller or voltage regulator IC. Designed for DC-DC converter and power supply control applications, it integrates the necessary oscillator, error amplifier, and gate drive circuitry for efficient power conversion. Key Specifications Type Power Management IC / Switching Controller Supply Voltage Per specification […]

LF2012-AR90FAB

Product Overview The LF2012-AR90FAB is an EMI suppression filter chip, typically from Murata or TDK, in a 2012 (0805 metric) package. Designed for noise filtering on signal and power lines, it provides common-mode or differential-mode noise attenuation in a compact surface-mount footprint. Key Specifications Type EMI Filter / Line Filter Impedance Per specification (frequency-dependent) Package […]