TPS563249DDCR

Product Overview The TPS563249DDCR is a Texas Instruments 4.5V to 17V, 3A synchronous step-down converter in a SOT-23-6 package. It features integrated MOSFETs, 1.2 MHz fixed switching frequency, D-CAP3 control, and internal compensation. The 3A output current and tiny package make it ideal for space-constrained POL applications. Key Specifications Input Voltage 4.5 V to 17 […]

TLV9101SIDBVR

Product Overview The TLV9101SIDBVR is a Texas Instruments 36V, 1.4 MHz low-noise single CMOS operational amplifier with rail-to-rail output. It features 4.5 nV/sqrt(Hz) input voltage noise, 1 pA input bias current, and 100 dB open-loop gain. Packaged in SOT-23-5 (DBV) rated for -40C to +125C. Key Specifications Supply Range 4.5 V to 36 V GBW […]

TPS549D22RVFT

Product Overview The TPS549D22RVFT is a Texas Instruments 40V, 40A synchronous step-down converter with integrated MOSFETs. It features D-CAP3 control mode, 500 kHz to 1.5 MHz programmable switching frequency, adaptive on-time, and comprehensive protection. Packaged in a thermally-enhanced VQFN-HR package rated for -40C to +125C. Key Specifications Input Voltage 4.5 V to 40 V Output […]

TPS7A4001DGNR

Product Overview The TPS7A4001DGNR is a Texas Instruments 36V, 1A low-noise, high-PSRR low-dropout linear regulator with adjustable output from 1.2V to 33V. It features 72 dB PSRR at 1 kHz, 13 uVrms output noise, 400 mV dropout at 1A, and reverse current protection. Packaged in 8-pin VSSOP PowerPAD rated for -40C to +125C. Key Specifications […]

CP2102N-A02-GQFN28

Product Overview The CP2102N-A02-GQFN28 is a Silicon Labs USB-to-UART bridge controller, A02 variant with different GPIO configuration from A01. It shares the same core features: USB 2.0 full-speed, up to 3 Mbps UART, integrated transceiver and oscillator, 1 KB OTP, and 4 configurable GPIO. Packaged in 28-pin QFN (5×5 mm), -40C to +85C. Key Specifications […]

ATMEGA16U2-AU

Product Overview The ATMEGA16U2-AU is a Microchip 8-bit AVR microcontroller with 16 KB Flash, 512 B SRAM, 512 B EEPROM, full-speed USB 2.0 device controller with 8 endpoints, and 22 GPIO. It operates at 16 MHz with 2.7V to 5.5V supply in a 32-pin TQFP package rated for -40C to +85C. Key Specifications Core AVR […]

LM358BAIDR

Product Overview The LM358BAIDR is a Texas Instruments industry-standard dual operational amplifier, BA-grade enhanced version. It features 3V to 36V supply range, 1.2 MHz gain bandwidth, 2 mV max offset voltage, 300 uA/ch quiescent current, internal EMI/RFI filtering, and ground-including common-mode range. Packaged in SOIC-8, -40C to +85C. Key Specifications Channels 2 (dual) Supply Range […]

TPS62175DQCR

Product Overview The TPS62175DQCR is a Texas Instruments 28 V, 500 mA synchronous step-down converter with DCS-Control topology and sleep mode. It features 4.8 uA sleep mode quiescent current, 1 MHz fixed switching frequency, 100% duty cycle mode, power-good output, and active output discharge. Packaged in 10-pin WSON (2×3 mm), -40C to +85C. Key Specifications […]

LMC6482IMMX/NOPB

Product Overview The LMC6482IMMX/NOPB is a Texas Instruments dual CMOS rail-to-rail input and output operational amplifier with ultra-low 20 fA input bias current. It offers 1.5 MHz gain bandwidth, 82 dB CMRR, and specified performance at 3V, 5V, and 15V supplies. Packaged in an 8-pin VSSOP (DGK) rated for -40C to +85C. Key Specifications Channels […]

TMC5160A-TA-T

Product Overview The TMC5160A-TA-T is an Analog Devices (Trinamic) high-power stepper motor controller and driver IC with integrated motion controller. It supports 8-60V motor supply with external MOSFETs for up to 20A coil current, 256 microsteps, StealthChop2 silent operation, and SpreadCycle high-dynamics mode. Packaged in 48-pin TQFP (7×7 mm), -40C to +125C. Key Specifications Motor […]