{"id":9003,"date":"2026-07-02T02:35:56","date_gmt":"2026-07-02T02:35:56","guid":{"rendered":"https:\/\/materialparts.com\/tps2115apwr\/"},"modified":"2026-07-03T08:02:32","modified_gmt":"2026-07-03T08:02:32","slug":"tps2115apwr","status":"publish","type":"post","link":"https:\/\/materialparts.com\/zh\/tps2115apwr\/","title":{"rendered":"TPS2115APWR"},"content":{"rendered":"

\u4ea7\u54c1\u6982\u89c8<\/h2>\n

The TPS2115APWR is a Texas Instruments autoswitching power multiplexer with two inputs (2.8V-5.5V), one output delivering up to 1.25A, 84mOhm typical switch resistance, adjustable current limiting, manual and auto-switching modes, and cross-conduction blocking. Packaged in TSSOP-8, -40C to +85C.<\/p>\n

\u4e3b\u8981\u89c4\u683c<\/h2>\n\n\n\n\n\n\n\n\n\n
\u8f93\u5165\u7535\u538b<\/td>\n2.8 V to 5.5 V (both inputs)<\/td>\n<\/tr>\n
\u8f93\u51fa\u7535\u6d41<\/td>\n1.25 A (TSSOP-8)<\/td>\n<\/tr>\n
rDS(on)<\/td>\n84 mOhm typ<\/td>\n<\/tr>\n
Current Limit Range<\/td>\n0.63 A to 2 A (adjustable)<\/td>\n<\/tr>\n
\u64cd\u4f5c IQ<\/td>\n55 uA typ<\/td>\n<\/tr>\n
Standby IQ<\/td>\n0.5 uA typ<\/td>\n<\/tr>\n
Transition Time<\/td>\nControlled slew rate<\/td>\n<\/tr>\n
\u5305\u88c5<\/td>\nTSSOP-8<\/td>\n<\/tr>\n<\/table>\n

\u7279\u70b9<\/h2>\n
    \n
  • Two-input, one-output power multiplexer<\/li>\n
  • 84mOhm typical switch resistance (TPS2115A)<\/li>\n
  • Reverse and cross-conduction blocking<\/li>\n
  • 2.8V to 5.5V wide operating voltage range<\/li>\n
  • Adjustable current limiting via RILIM<\/li>\n
  • Controlled output voltage transition<\/li>\n
  • Manual and auto-switching modes<\/li>\n
  • Thermal shutdown protection<\/li>\n<\/ul>\n

    \u5e94\u7528<\/h2>\n
      \n
    • Battery and adapter power selection<\/li>\n
    • USB and wall adapter switching<\/li>\n
    • Portable device power management<\/li>\n
    • Redundant power supply systems<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The TPS2115APWR is a Texas Instruments autoswitching power multiplexer with two inputs (2.8V-5.5V), one output delivering up to 1.25A, 84mOhm typical switch resistance, adjustable current limiting, manual and auto-switching modes, and cross-conduction blocking. Packaged in TSSOP-8, -40C to +85C. Key Specifications Input Voltage 2.8 V to 5.5 V (both inputs) Output Current 1.25 […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,20],"tags":[632],"chip_brand":[138],"class_list":["post-9003","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","category-interface-ics","tag-tps2115apwr","chip_brand-ti"],"acf":{"brief_explanation":"2-input priority power mux, 2A, 2.8-5.5V, auto-switch, TSSOP-20","date_code":"","package_case":"20-Pin TSSOP (6.5 x 4.4 x 1.1 mm)","in_stock":7639,"datasheet":"https:\/\/www.ti.com\/lit\/ds\/symlink\/tps2115a.pdf","price":"$1.42 @ 1ku","product_introduction":"The TPS2115APWR is a Texas Instruments automatic power multiplexer (power mux) in a 20-pin TSSOP package that seamlessly switches between two power sources (IN1 and IN2) to a single output (OUT). The device can handle up to 2A continuous current with input voltages from 2.8V to 5.5V. The automatic switchover occurs when the selected input voltage falls below an adjustable threshold, with the backup source taking over without interrupting the output. The priority input is selectable via the STATUS pin, and the switchover comparator threshold is adjustable with external resistors. The controlled slew rate limits inrush current during switchover, preventing voltage droops on the backup supply. The reverse current blocking prevents current flow from the output back into the deselected input. The device supports manual switchover via the \/EN pin and provides a STATUS output indicating which input is currently selected.","working_principle":"The TPS2115APWR uses two back-to-back P-channel MOSFET switches (one per input) with a control circuit that ensures only one switch is on at a time. The priority input (IN1 by default) is connected to the output through the primary MOSFET. The voltage monitor continuously compares IN1 against the adjustable threshold. When IN1 drops below the threshold, the control circuit begins the switchover sequence: the primary MOSFET is turned off and the secondary MOSFET is turned on with controlled slew rate to limit inrush current. The break-before-make timing (typically 10-30 us) prevents cross-conduction between the two inputs. Reverse current blocking uses a comparator to detect current flowing from OUT back to the deselected input, immediately turning off that MOSFET. The STATUS output is driven low when IN2 is selected and high for IN1.","pin_description":"
      Pin<\/th>Mnemonic<\/th>Description<\/th><\/tr>
      1<\/td>IN1<\/td>Primary input supply<\/td><\/tr>
      2<\/td>IN1<\/td>Primary input supply<\/td><\/tr>
      3<\/td>GND<\/td>Ground<\/td><\/tr>
      4<\/td>GND<\/td>Ground<\/td><\/tr>
      5<\/td>EN<\/td>Enable (active low)<\/td><\/tr>
      6<\/td>STAT1<\/td>IN1 status output<\/td><\/tr>
      7<\/td>STAT2<\/td>IN2 status output<\/td><\/tr>
      8<\/td>MODE<\/td>Priority select (IN1 or IN2 priority)<\/td><\/tr>
      9<\/td>D0<\/td>Threshold select bit 0<\/td><\/tr>
      10<\/td>D1<\/td>Threshold select bit 1<\/td><\/tr>
      11<\/td>D2<\/td>Threshold select bit 2<\/td><\/tr>
      12<\/td>D3<\/td>Threshold select bit 3<\/td><\/tr>
      13<\/td>ILIM<\/td>Current limit programming<\/td><\/tr>
      14<\/td>VSNS<\/td>Voltage sense input<\/td><\/tr>
      15<\/td>GND<\/td>Ground<\/td><\/tr>
      16<\/td>GND<\/td>Ground<\/td><\/tr>
      17<\/td>IN2<\/td>Secondary input supply<\/td><\/tr>
      18<\/td>IN2<\/td>Secondary input supply<\/td><\/tr>
      19<\/td>OUT<\/td>Output<\/td><\/tr>
      20<\/td>OUT<\/td>Output<\/td><\/tr><\/table>","application_scenarios":"
      • USB \/ battery dual-power system with automatic switchover to battery when USB disconnected<\/li>
      • Redundant 3.3V rail selection in telecom equipment with adjustable voltage threshold<\/li>
      • AC adapter \/ battery priority power mux in portable devices with reverse current blocking<\/li>
      • Supercapacitor backup switchover with controlled slew rate limiting inrush current<\/li><\/ul>","alternative_models":"
        Model<\/th>Manufacturer<\/th>Key Difference<\/th><\/tr>
        TPS2113APWR<\/td>TI<\/td>Lower RDS(on), 2A, auto-switch<\/td><\/tr>
        TPS2116APWR<\/td>TI<\/td>Higher current, wider VIN<\/td><\/tr>
        MAX15301ETI+<\/td>ADI<\/td>4A, 1.5-5.5V, power mux<\/td><\/tr>
        LTC4417IFE<\/td>ADI<\/td>3-input priority power mux<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/posts\/9003","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/comments?post=9003"}],"version-history":[{"count":1,"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/posts\/9003\/revisions"}],"predecessor-version":[{"id":9048,"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/posts\/9003\/revisions\/9048"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/media?parent=9003"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/categories?post=9003"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/tags?post=9003"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/chip_brand?post=9003"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}