The TMC5160A-TA-T is an Analog Devices (Trinamic) high-power stepper motor controller and driver IC with integrated motion controller. It supports 8-60V motor supply with external MOSFETs for up to 20A coil current, 256 microsteps, StealthChop2 silent operation, and SpreadCycle high-dynamics mode. Packaged in 48-pin TQFP (7×7 mm), -40C to +125C.<\/p>\n
| Motor Supply<\/td>\n | 8 V to 60 V<\/td>\n<\/tr>\n | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Max Coil Current<\/td>\n | 20 A (external MOSFETs)<\/td>\n<\/tr>\n | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Microsteps<\/td>\n | Up to 256<\/td>\n<\/tr>\n | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Interfaces<\/td>\n | SPI, UART, STEP\/DIR<\/td>\n<\/tr>\n | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Ramp Generator<\/td>\n | SixPoint with DcStep<\/td>\n<\/tr>\n | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| \u5305\u88c5<\/td>\n | TQFP-48 (7×7 mm)<\/td>\n<\/tr>\n<\/table>\n\u7279\u70b9<\/h2>\n\u5e94\u7528<\/h2>\nProduct Overview The TMC5160A-TA-T is an Analog Devices (Trinamic) high-power stepper motor controller and driver IC with integrated motion controller. It supports 8-60V motor supply with external MOSFETs for up to 20A coil current, 256 microsteps, StealthChop2 silent operation, and SpreadCycle high-dynamics mode. Packaged in 48-pin TQFP (7×7 mm), -40C to +125C. Key Specifications Motor […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,20],"tags":[],"chip_brand":[165],"class_list":["post-8744","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","category-interface-ics","chip_brand-adi"],"acf":{"brief_explanation":"Stepper motor driver, 3A, 20-50V, StallGuard2, StealthChop, TQFP-48","date_code":"","package_case":"48-TQFP (7.00 x 7.00 mm)","in_stock":3200,"datasheet":"https:\/\/www.trinamic.com\/products\/integrated-circuits\/details\/tmc5160a\/","price":"$7.50 @ 1ku","product_introduction":"The Trinamic TMC5160A-TA-T is a high-power stepper motor driver and controller IC integrating a motion controller with a 3A stepper motor driver in a single 48-pin TQFP package. The device combines Trinamic's renowned StealthChop2 ultra-silent motor driving with StallGuard2 sensorless homing and CoolStep adaptive current control, delivering the most feature-rich stepper motor driver available at this power level. The integrated motion controller offloads ramp generation and position management from the host MCU\u2014the user simply writes the target position to a register via SPI, and the TMC5160A autonomously computes and executes the velocity and acceleration profile. The 20V to 50V supply range supports NEMA 17 and NEMA 23 stepper motors in industrial automation, CNC, 3D printing, and laboratory automation. The StealthChop2 technology eliminates audible motor noise by using a voltage-chopper mode that maintains sinusoidal current waveform at low speeds\u2014motors run silently below 300 RPM. At higher speeds, the driver seamlessly transitions to SpreadCycle mode for maximum torque. StallGuard2 detects mechanical endstops without limit switches by monitoring the motor back-EMF, enabling sensorless homing that reduces BOM cost and wiring complexity. CoolStep dynamically reduces motor current based on the mechanical load, saving up to 75% energy and reducing motor heating. The 256 microstep resolution ensures extremely smooth rotation without vibration resonance.","working_principle":"The TMC5160A uses an SPI interface for configuration and motion control. The internal motion controller generates trapezoidal or S-curve velocity profiles based on the target position, maximum velocity, and acceleration parameters written to internal registers. The velocity profile is converted into step pulses that drive the internal stepper driver state machine. The driver stage uses an 8-bit microstep table with 256 microsteps per full step, generating two 90-degree phase-shifted sinusoidal current waveforms for the A and B motor coils. StealthChop2 operates by regulating the coil current using a voltage-mode PWM technique\u2014the driver measures the coil current, computes the required PWM duty cycle, and applies it without a traditional current-sense resistor comparator loop. This approach eliminates the current regulation chopper noise that causes audible whining in conventional drivers. At motor speeds above the StealthChop2 threshold (programmable), the driver transitions to SpreadCycle, a current-mode chopper that uses a sophisticated cycle-by-cycle current regulation with freewheeling phase for optimal high-speed torque. StallGuard2 works by measuring the difference between the coil current and the expected current during the active chopper phase\u2014when the motor hits a mechanical obstruction, the back-EMF drops, causing a detectable change in the current regulation behavior. CoolStep uses the StallGuard signal as a proxy for mechanical load and reduces the coil current proportionally when the load is below the full-load threshold.","pin_description":"
|