{"id":8350,"date":"2026-06-28T12:26:48","date_gmt":"2026-06-28T12:26:48","guid":{"rendered":"https:\/\/materialparts.com\/stm32f207vgt6\/"},"modified":"2026-06-28T12:26:48","modified_gmt":"2026-06-28T12:26:48","slug":"stm32f207vgt6","status":"publish","type":"post","link":"https:\/\/materialparts.com\/zh\/stm32f207vgt6\/","title":{"rendered":"STM32F207VGT6"},"content":{"rendered":"

\u4ea7\u54c1\u6982\u89c8<\/h2>\n

The STM32F207VGT6 from STMicroelectronics is an ARM Cortex-M3 microcontroller running at 120 MHz with 1 MB Flash and 128 KB SRAM in an LQFP-100 package. Part of the STM32F2 Series, it features Ethernet MAC, USB 2.0 HS\/FS OTG, two CAN buses, multiple timers, and extensive peripheral connectivity for demanding embedded applications.<\/p>\n

\u4e3b\u8981\u89c4\u683c<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n
\u6838\u5fc3<\/td>\nARM Cortex-M3 @ 120 MHz<\/td>\n<\/tr>\n
Flash Memory<\/td>\n1 MB<\/td>\n<\/tr>\n
SRAM<\/td>\n128 KB (plus 64 KB CCM)<\/td>\n<\/tr>\n
Ethernet MAC<\/td>\n10\/100 Mbps IEEE 802.3<\/td>\n<\/tr>\n
USB<\/td>\n2.0 HS\/FS OTG with on-chip PHY<\/td>\n<\/tr>\n
CAN<\/td>\n2 x CAN 2.0 B (Active)<\/td>\n<\/tr>\n
ADC<\/td>\n3 x 12-bit, up to 6 MSPS<\/td>\n<\/tr>\n
\u53d1\u63f4\u4f1a<\/td>\n2 x 12 \u4f4d<\/td>\n<\/tr>\n
\u8ba1\u65f6\u5668<\/td>\nUp to 17 (including advanced motor control)<\/td>\n<\/tr>\n
\u5de5\u4f5c\u6e29\u5ea6<\/td>\n-40\u00b0C to +85\u00b0C<\/td>\n<\/tr>\n
\u5305\u88c5<\/td>\nLQFP-100 (14 x 14 mm)<\/td>\n<\/tr>\n<\/table>\n

\u7279\u70b9<\/h2>\n
    \n
  • 120 MHz Cortex-M3 with 150 DMIPS and DSP instructions<\/li>\n
  • Chrom-ART Accelerator for 2D graphics DMA operations<\/li>\n
  • 1 MB Flash with read-out protection and ECC<\/li>\n
  • 128 KB SRAM + 64 KB Core Coupled Memory (CCM)<\/li>\n
  • Ethernet MAC with IEEE 1588 PTP support<\/li>\n
  • USB 2.0 HS\/FS OTG with dedicated 4 KB SRAM<\/li>\n
  • Multiple communication interfaces: USART, SPI, I2C, CAN, SDIO<\/li>\n<\/ul>\n

    \u5e94\u7528<\/h2>\n
      \n
    • Industrial automation and motor control<\/li>\n
    • Networked embedded systems with Ethernet<\/li>\n
    • Medical devices and diagnostic equipment<\/li>\n
    • Consumer electronics with USB connectivity<\/li>\n
    • Smart grid and energy management systems<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The STM32F207VGT6 from STMicroelectronics is an ARM Cortex-M3 microcontroller running at 120 MHz with 1 MB Flash and 128 KB SRAM in an LQFP-100 package. Part of the STM32F2 Series, it features Ethernet MAC, USB 2.0 HS\/FS OTG, two CAN buses, multiple timers, and extensive peripheral connectivity for demanding embedded applications. Key Specifications […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,25],"tags":[],"chip_brand":[142],"class_list":["post-8350","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","category-microcontrollers-mcu","chip_brand-st"],"acf":{"brief_explanation":"120MHz ARM Cortex-M3 MCU, 1MB Flash, 128KB SRAM, Ethernet, USB HS, LQFP-100","date_code":"","package_case":"LQFP-100 (14.00 x 14.00 x 1.40 mm)","in_stock":2698,"datasheet":"https:\/\/www.st.com\/resource\/en\/datasheet\/stm32f207vg.pdf","price":"$8.50 @ 1ku","product_introduction":"The STM32F207VGT6 is a high-performance ARM Cortex-M3 microcontroller from STMicroelectronics running at 120 MHz and delivering 150 DMIPS with DSP instructions. The device integrates 1 MB of Flash memory with read-out protection and error correction, plus 128 KB of general-purpose SRAM and 64 KB of Core Coupled Memory (CCM) for time-critical routines. The STM32F2 Series features ST's adaptive real-time memory accelerator (ART Accelerator) and Chrom-ART 2D graphics DMA engine for efficient display operations. The peripheral set includes a 10\/100 Mbps Ethernet MAC with IEEE 1588 Precision Time Protocol support, USB 2.0 HS\/FS OTG with on-chip PHY and dedicated 4 KB SRAM, two CAN 2.0 B controllers, three 12-bit ADCs at up to 6 MSPS, two 12-bit DACs, and up to 17 timers including advanced motor control PWM. Housed in a 100-pin LQFP package, it provides up to 82 GPIO pins with extensive connectivity options.","working_principle":"The STM32F207VGT6 is built around an ARM Cortex-M3 processor core with a 3-stage pipeline executing Thumb-2 instructions at up to 120 MHz. The ART Accelerator uses an instruction cache, literal cache, and prefetch queue to minimize Flash wait states, allowing the core to achieve 150 DMIPS at zero wait-state throughput. The multi-AHB bus matrix connects the Cortex-M3, DMA controllers, and Ethernet MAC to three independent SRAM banks and the Flash, enabling concurrent access without contention. The CCM (Core Coupled Memory) is a zero-wait-state SRAM accessible only by the CPU, ideal for critical interrupt handlers and real-time algorithms. The Chrom-ART Accelerator is a dedicated DMA peripheral that offloads 2D graphics operations (fill, copy, blend) from the CPU. The Ethernet MAC implements the IEEE 802.3 MAC layer and connects to an external PHY via RMII or MII interface, with hardware support for IEEE 1588 timestamping. The USB OTG controller includes an on-chip full-speed PHY and interfaces to an external ULPI HS PHY for 480 Mbps operation.","pin_description":"
      Pin Group<\/th>Count<\/th>Function<\/th><\/tr>
      Power (VDD\/VSS)<\/td>16<\/td>Multiple 3.3 V supply and ground pairs for I\/O, analog, and core<\/td><\/tr>
      VBAT<\/td>1<\/td>Battery backup supply for RTC and backup registers<\/td><\/tr>
      VDDA\/VSSA<\/td>2<\/td>Analog supply for ADC, DAC, and reset circuitry<\/td><\/tr>
      NRST<\/td>1<\/td>System reset input (active low)<\/td><\/tr>
      BOOT0<\/td>1<\/td>Boot mode selection<\/td><\/tr>
      OSC_IN\/OSC_OUT<\/td>2<\/td>Main oscillator (4-26 MHz HSE)<\/td><\/tr>
      OSC32_IN\/OSC32_OUT<\/td>2<\/td>32.768 kHz low-speed oscillator (LSE)<\/td><\/tr>
      GPIO (Port A-I)<\/td>82<\/td>General-purpose I\/O with alternate function mapping<\/td><\/tr>
      BOOT1<\/td>1<\/td>Mapped to PB2; boot configuration pin<\/td><\/tr><\/table>

      The LQFP-100 package provides 82 configurable GPIO pins across Ports A through I, each supporting up to 16 alternate functions for peripheral connectivity including Ethernet, USB, CAN, SPI, I2C, USART, ADC, DAC, timers, and SDIO.<\/p>","application_scenarios":"

      • Industrial Ethernet Connectivity<\/strong>: Ethernet-based PLCs, remote I\/O modules, and Modbus\/TCP or Profinet gateways<\/li>
      • Motor Control Systems<\/strong>: Multi-axis motor drive controllers using advanced PWM timers and ADC synchronization<\/li>
      • Medical Instrumentation<\/strong>: Portable diagnostic devices with USB data transfer and precision analog measurement<\/li>
      • Smart Grid and Energy<\/strong>: Power meters with Ethernet reporting, IEEE 1588 time sync, and multi-channel ADC sampling<\/li>
      • Consumer Devices<\/strong>: Smart appliances and home automation controllers with USB and CAN connectivity<\/li><\/ul>","alternative_models":"
        Model<\/th>Manufacturer<\/th>Core<\/th>Flash<\/th>RAM<\/th>Package<\/th>Notes<\/th><\/tr>
        STM32F407VGT6<\/td>STMicroelectronics<\/td>Cortex-M4 @ 168 MHz<\/td>1 MB<\/td>192 KB<\/td>LQFP-100<\/td>FPU, higher performance<\/td><\/tr>
        STM32F207ZET6<\/td>STMicroelectronics<\/td>Cortex-M3 @ 120 MHz<\/td>512 KB<\/td>128 KB<\/td>LQFP-144<\/td>More GPIO, less Flash<\/td><\/tr>
        SAM3X8E<\/td>Microchip<\/td>Cortex-M3 @ 84 MHz<\/td>512 KB<\/td>100 KB<\/td>LQFP-144<\/td>Arduino Due MCU<\/td><\/tr>
        LPC1768FBD100<\/td>NXP<\/td>Cortex-M3 @ 100 MHz<\/td>512 KB<\/td>64 KB<\/td>LQFP-100<\/td>Ethernet, USB, CAN<\/td><\/tr>
        STM32F427VIT6<\/td>STMicroelectronics<\/td>Cortex-M4 @ 180 MHz<\/td>512 KB<\/td>256 KB<\/td>LQFP-100<\/td>Chrom-ART, FPU, DSP<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/posts\/8350","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/comments?post=8350"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/posts\/8350\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/media?parent=8350"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/categories?post=8350"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/tags?post=8350"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/chip_brand?post=8350"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}