{"id":6812,"date":"2026-06-21T12:40:38","date_gmt":"2026-06-21T12:40:38","guid":{"rendered":"https:\/\/materialparts.com\/ap7365-33wg-7\/"},"modified":"2026-06-21T12:40:38","modified_gmt":"2026-06-21T12:40:38","slug":"ap7365-33wg-7","status":"publish","type":"post","link":"https:\/\/materialparts.com\/zh\/ap7365-33wg-7\/","title":{"rendered":"AP7365-33WG-7"},"content":{"rendered":"<h2>\u4ea7\u54c1\u6982\u89c8<\/h2>\n<p>The AP7365-33WG-7 from Diodes Incorporated is a 600 mA, 3.3 V fixed-output low-dropout linear regulator with 35 uA quiescent current, 65 dB PSRR, and enable control in a SOT-25 package.<\/p>\n<h2>\u4e3b\u8981\u89c4\u683c<\/h2>\n<table>\n<tr>\n<td>\u7c7b\u578b<\/td>\n<td>Fixed 3.3V LDO Linear Voltage Regulator<\/td>\n<\/tr>\n<tr>\n<td>Output Voltage<\/td>\n<td>3.3 V (fixed)<\/td>\n<\/tr>\n<tr>\n<td>\u8f93\u51fa\u7535\u6d41<\/td>\n<td>600 mA<\/td>\n<\/tr>\n<tr>\n<td>\u8f93\u5165\u7535\u538b\u8303\u56f4<\/td>\n<td>2.0 V to 6.0 V<\/td>\n<\/tr>\n<tr>\n<td>Dropout Voltage<\/td>\n<td>300 mV (typical) @ 600mA<\/td>\n<\/tr>\n<tr>\n<td>Quiescent Current (Iq)<\/td>\n<td>35 uA (typical)<\/td>\n<\/tr>\n<tr>\n<td>PSRR<\/td>\n<td>65 dB @ 1kHz<\/td>\n<\/tr>\n<tr>\n<td>Load Regulation<\/td>\n<td>1%<\/td>\n<\/tr>\n<tr>\n<td>Enable Control<\/td>\n<td>Yes (active HIGH)<\/td>\n<\/tr>\n<tr>\n<td>Protection<\/td>\n<td>Over-current, short-circuit, thermal shutdown<\/td>\n<\/tr>\n<tr>\n<td>\u5305\u88c5<\/td>\n<td>SOT-25 (SC-74A, SOT-753)<\/td>\n<\/tr>\n<tr>\n<td>\u5de5\u4f5c\u6e29\u5ea6<\/td>\n<td>-40C to +85C<\/td>\n<\/tr>\n<tr>\n<td>Output Capacitor<\/td>\n<td>1 uF ceramic (min)<\/td>\n<\/tr>\n<tr>\n<td>Start-up Time<\/td>\n<td>200 us (typical)<\/td>\n<\/tr>\n<\/table>\n<h2>\u7279\u70b9<\/h2>\n<ul>\n<li>Ultra-low 35 uA quiescent current<\/li>\n<li>65 dB PSRR at 1 kHz for noise-sensitive applications<\/li>\n<li>200 us fast start-up time<\/li>\n<li>Stable with 1 uF ceramic output capacitor<\/li>\n<li>Current limit at approximately 1.4 A<\/li>\n<li>Short-circuit protection clamps to 240 mA<\/li>\n<li>Thermal shutdown at 145C with 130C hysteresis<\/li>\n<li>Green molding compound, RoHS compliant<\/li>\n<\/ul>\n<h2>\u5e94\u7528<\/h2>\n<ul>\n<li>Notebook and server power rails<\/li>\n<li>FPGA and DSP I\/O power<\/li>\n<li>Battery-powered portable devices<\/li>\n<li>Consumer electronics 3.3V regulation<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"<p>Product Overview The AP7365-33WG-7 from Diodes Incorporated is a 600 mA, 3.3 V fixed-output low-dropout linear regulator with 35 uA quiescent current, 65 dB PSRR, and enable control in a SOT-25 package. Key Specifications Type Fixed 3.3V LDO Linear Voltage Regulator Output Voltage 3.3 V (fixed) Output Current 600 mA Input Voltage Range 2.0 V [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[19,13],"tags":[],"chip_brand":[193],"class_list":["post-6812","post","type-post","status-publish","format-standard","hentry","category-analog-linear-ics","category-integrated-circuits-ics","chip_brand-diodes-inc"],"acf":{"brief_explanation":"3.3V Fixed LDO, 600mA, 35uA Iq, 65dB PSRR, SOT-25","date_code":"","package_case":"SOT-25 \/ SC-74A \/ SOT-753 (2.9 x 1.6 x 1.1 mm)","in_stock":13688,"datasheet":"https:\/\/www.diodes.com\/assets\/Datasheets\/AP7365.pdf","price":"$0.113 @ 3ku","product_introduction":"The AP7365-33WG-7 from Diodes Incorporated is a 600 mA low-dropout linear regulator providing a fixed 3.3 V output with only 35 uA typical quiescent current. The device features 65 dB PSRR at 1 kHz, effectively rejecting input ripple from switching pre-regulators. The 300 mV typical dropout voltage at full load allows operation from a 3.6 V Li-ion battery down to end-of-discharge. An enable pin allows logic-controlled on\/off switching for power sequencing. Internal protection includes current limiting (1.4 A typical), short-circuit protection (240 mA clamp), and thermal shutdown (145C with 15C hysteresis). The fast 200 us start-up time enables rapid power cycling for battery conservation. Stability is maintained with just a 1 uF ceramic output capacitor, minimizing BOM cost and PCB area.","working_principle":"The AP7365-33WG-7 uses a P-channel MOSFET pass element in a common-source configuration. The error amplifier compares a fraction of the output voltage with an internal 0.8 V bandgap reference (in the adjustable version) or an internal resistor divider (in the fixed 3.3 V version). The amplifier drives the P-MOSFET gate to maintain regulation. The low 35 uA quiescent current is achieved by biasing the error amplifier and reference at minimal current while maintaining adequate gain-bandwidth for stability. The enable pin controls an internal switch that disconnects the bias circuitry when LOW, reducing supply current to sub-microamp levels. The 65 dB PSRR at 1 kHz is achieved through high loop gain at audio frequencies. Current limiting uses a sense resistor in the pass element path; when the voltage drop exceeds the threshold, the error amplifier limits gate drive. Thermal shutdown uses a temperature sensor near the pass transistor that disables the output when junction temperature exceeds 145C.","pin_description":"<table><tr><th>Pin<\/th><th>Name<\/th><th>Type<\/th><th>Function<\/th><\/tr><tr><td>1<\/td><td>VIN<\/td><td>Input<\/td><td>Unregulated input (2.0-6.0V)<\/td><\/tr><tr><td>2<\/td><td>GND<\/td><td>Ground<\/td><td>Ground<\/td><\/tr><tr><td>3<\/td><td>EN<\/td><td>Input<\/td><td>Enable (HIGH=on, LOW=off)<\/td><\/tr><tr><td>4<\/td><td>NC<\/td><td>-<\/td><td>No connect<\/td><\/tr><tr><td>5<\/td><td>VOUT<\/td><td>Output<\/td><td>Regulated 3.3V output<\/td><\/tr><\/table>","application_scenarios":"<ul><li>3.3V MCU I\/O rail from 5V USB supply with 65dB ripple rejection<\/li><li>Portable medical device 3.3V rail from Li-ion battery with 35uA Iq<\/li><li>WiFi module 3.3V power with enable control for sleep mode<\/li><li>FPGA configuration rail requiring fast 200us power-up sequencing<\/li><\/ul>","alternative_models":"<table><tr><th>Manufacturer<\/th><th>Part Number<\/th><th>Package<\/th><th>Notes<\/th><\/tr><tr><td>Diodes Inc<\/td><td>AP7365-18WG-7<\/td><td>SOT-25<\/td><td>1.8V fixed version<\/td><\/tr><tr><td>TI<\/td><td>TLV70033DDCR<\/td><td>SOT-23-5<\/td><td>300mA, 35uA Iq, similar<\/td><\/tr><tr><td>onsemi<\/td><td>NCP511SN33T1G<\/td><td>SOT-23-5<\/td><td>3.3V, 80mA, very low Iq<\/td><\/tr><tr><td>Richtek<\/td><td>RT9193-33GB<\/td><td>SOT-23-5<\/td><td>3.3V, 300mA, similar<\/td><\/tr><tr><td>Microchip<\/td><td>MIC5219-3.3YM5<\/td><td>SOT-23-5<\/td><td>3.3V, 500mA, similar class<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/posts\/6812","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/comments?post=6812"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/posts\/6812\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/media?parent=6812"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/categories?post=6812"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/tags?post=6812"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/zh\/wp-json\/wp\/v2\/chip_brand?post=6812"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}