{"id":9678,"date":"2026-07-05T09:07:14","date_gmt":"2026-07-05T09:07:14","guid":{"rendered":"https:\/\/materialparts.com\/xc61cn3602mr-g\/"},"modified":"2026-07-05T09:07:14","modified_gmt":"2026-07-05T09:07:14","slug":"xc61cn3602mr-g","status":"publish","type":"post","link":"https:\/\/materialparts.com\/es\/xc61cn3602mr-g\/","title":{"rendered":"XC61CN3602MR-G"},"content":{"rendered":"

Productos<\/h2>\n

The XC61CN3602MR-G from Torex Semiconductor is a 3.6V voltage detector (reset IC) with CMOS push-pull output in a SOT-23-5 package. The N suffix indicates active-low CMOS output, 3602 specifies 3.6V detect voltage, M is SOT-23-5 package, R is tape-and-reel, and -G indicates environmental compliance. Voltage detectors monitor power supply rails and generate reset signals when voltage drops below threshold.<\/p>\n

Especificaciones<\/h2>\n\n\n\n\n\n\n\n\n
Detect Voltage (VDF)<\/td>\n3.6V (+-2%)<\/td>\n<\/tr>\n
Output Type<\/td>\nCMOS push-pull (active-low)<\/td>\n<\/tr>\n
Hysteresis<\/td>\n50 mV (typ)<\/td>\n<\/tr>\n
Supply Current<\/td>\n1.5 uA (typ)<\/td>\n<\/tr>\n
Operating Voltage<\/td>\n0.8V ~ 6.0V<\/td>\n<\/tr>\n
Paquete<\/td>\nSOT-23-5 (2.9 x 1.6 x 1.1 mm)<\/td>\n<\/tr>\n
Temperatura de funcionamiento<\/td>\n-40C to +105C<\/td>\n<\/tr>\n<\/table>\n

Caracter\u00edsticas<\/h2>\n
    \n
  • Precision 3.6V detection threshold with +-2% accuracy<\/li>\n
  • Ultra-low 1.5uA supply current for always-on monitoring<\/li>\n
  • CMOS push-pull output actively drives high and low without pull-up resistor<\/li>\n
  • 50mV hysteresis prevents chattering near threshold<\/li>\n
  • SOT-23-5 package for minimal board footprint<\/li>\n<\/ul>\n

    Aplicaciones<\/h2>\n
      \n
    • MCU brown-out detection and reset generation<\/li>\n
    • Power supply under-voltage monitoring<\/li>\n
    • Battery low-voltage detection<\/li>\n
    • System power-on reset timing<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The XC61CN3602MR-G from Torex Semiconductor is a 3.6V voltage detector (reset IC) with CMOS push-pull output in a SOT-23-5 package. The N suffix indicates active-low CMOS output, 3602 specifies 3.6V detect voltage, M is SOT-23-5 package, R is tape-and-reel, and -G indicates environmental compliance. Voltage detectors monitor power supply rails and generate reset […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,32],"tags":[961],"chip_brand":[281],"class_list":["post-9678","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","category-low-dropout-regulators-ldo","tag-xc61cn3602mr-g","chip_brand-torex"],"acf":{"brief_explanation":"3.6V voltage detector, CMOS active-low output, SOT-23-5, 1.5uA Iq, Torex","date_code":"","package_case":"SOT-23-5 (2.9 x 1.6 x 1.1 mm)","in_stock":4147,"datasheet":"https:\/\/www.torexsemi.com\/english\/products\/voltage-detectors\/","price":"","product_introduction":"The Torex XC61CN3602MR-G is a 3.6V voltage detector (reset IC) with CMOS push-pull output in a SOT-23-5 package. The device monitors the supply voltage and asserts an active-low reset output when the voltage drops below the 3.6V detection threshold (VDF). When the supply voltage rises above VDF plus hysteresis (typically 50mV), the reset output de-asserts, allowing the monitored system to resume operation. The CMOS push-pull output actively drives both high and low states without requiring an external pull-up resistor, providing clean output transitions. The ultra-low 1.5uA typical supply current enables continuous supply voltage monitoring in battery-powered systems without significantly impacting battery life.","working_principle":"The XC61C series uses a precision voltage reference and comparator to monitor the input voltage. When VCC drops below the 3.6V detection voltage (VDF), the output goes low (active-low CMOS). When VCC rises above VDF + hysteresis (typically 50mV), the output returns high. The CMOS push-pull output actively drives both high and low states, providing fast edges without external pull-up resistors. The built-in hysteresis prevents chattering near the threshold voltage, ensuring clean reset signal generation even with slowly varying supply voltages.","pin_description":"
      Pin<\/th>Name<\/th>Type<\/th>Function<\/th><\/tr>
      1<\/td>VOUT<\/td>Output<\/td>CMOS output (active low)<\/td><\/tr>
      2<\/td>VSS<\/td>Power<\/td>Ground<\/td><\/tr>
      3<\/td>VIN<\/td>Input<\/td>Voltage sense input (connect to VCC)<\/td><\/tr><\/table>","application_scenarios":"
      • MCU brown-out detection and reset generation at 3.6V threshold<\/li>
      • 3.3V power supply under-voltage monitoring<\/li>
      • Li-ion battery low-voltage detection and alert<\/li>
      • System power-on reset timing for 3.3V designs<\/li><\/ul>","alternative_models":"
        Manufacturer<\/th>Part Number<\/th>Package<\/th>Notes<\/th><\/tr>
        Ricoh<\/td>R3112N361C-TR-FE<\/td>SOT-23-5<\/td>3.6V detector, same package<\/td><\/tr>
        TI<\/td>TLV803EDBVR-3.6<\/td>SOT-23-3<\/td>3.6V supervisor, smaller package<\/td><\/tr>
        Richtek<\/td>RT9818C-36GV<\/td>SOT-23-5<\/td>3.6V voltage detector<\/td><\/tr>
        Torex<\/td>XC61EN3602MR-G<\/td>SOT-23-5<\/td>Open-drain output variant<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/9678","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/comments?post=9678"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/9678\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media?parent=9678"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/categories?post=9678"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/tags?post=9678"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/chip_brand?post=9678"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}