{"id":9656,"date":"2026-07-05T09:06:31","date_gmt":"2026-07-05T09:06:31","guid":{"rendered":"https:\/\/materialparts.com\/mx25l3233fm2i-08g\/"},"modified":"2026-07-05T09:06:31","modified_gmt":"2026-07-05T09:06:31","slug":"mx25l3233fm2i-08g","status":"publish","type":"post","link":"https:\/\/materialparts.com\/es\/mx25l3233fm2i-08g\/","title":{"rendered":"MX25L3233FM2I-08G"},"content":{"rendered":"<h2>Productos<\/h2>\n<p>The MX25L3233FM2I-08G is a 32Mb (4MB) Serial NOR Flash memory from Macronix International, part of the MXSMIO family. It supports Single, Dual, and Quad I\/O SPI interfaces with clock frequencies up to 133MHz. The -08G speed grade offers 8ns access time in an 8-SOP (200mil) package rated for industrial temperature range (-40 to +85C). The device features 4K\/32K\/64K sector\/block erase, program suspend\/resume, secured OTP, and AEC-Q100 compliance.<\/p>\n<h2>Especificaciones<\/h2>\n<table>\n<tr>\n<td>Densidad<\/td>\n<td>32Mb (4,194,304 x 8)<\/td>\n<\/tr>\n<tr>\n<td>Interface<\/td>\n<td>SPI \/ Dual SPI \/ Quad SPI<\/td>\n<\/tr>\n<tr>\n<td>Max Clock Frequency<\/td>\n<td>133 MHz<\/td>\n<\/tr>\n<tr>\n<td>Access Time<\/td>\n<td>8 ns<\/td>\n<\/tr>\n<tr>\n<td>Tensi\u00f3n de alimentaci\u00f3n<\/td>\n<td>2.65V ~ 3.6V<\/td>\n<\/tr>\n<tr>\n<td>Operating Current<\/td>\n<td>17 mA (typ)<\/td>\n<\/tr>\n<tr>\n<td>Program Current<\/td>\n<td>15 mA (typ)<\/td>\n<\/tr>\n<tr>\n<td>Page Size<\/td>\n<td>256 bytes<\/td>\n<\/tr>\n<tr>\n<td>Sector \/ Block Size<\/td>\n<td>4KB \/ 32KB \/ 64KB<\/td>\n<\/tr>\n<tr>\n<td>Erase\/Program Cycles<\/td>\n<td>100,000 (min)<\/td>\n<\/tr>\n<tr>\n<td>Data Retention<\/td>\n<td>20 years<\/td>\n<\/tr>\n<tr>\n<td>Paquete<\/td>\n<td>8-SOP (200mil)<\/td>\n<\/tr>\n<tr>\n<td>Temperatura de funcionamiento<\/td>\n<td>-40C to +85C<\/td>\n<\/tr>\n<\/table>\n<h2>Caracter\u00edsticas<\/h2>\n<ul>\n<li>Supports SPI Mode 0 and Mode 3 with Single\/Dual\/Quad I\/O<\/li>\n<li>Program Suspend\/Resume and Erase Suspend\/Resume for real-time interrupt handling<\/li>\n<li>4K-bit Secured OTP area with unique identifier for device authentication<\/li>\n<li>AEC-Q100 qualified for automotive applications<\/li>\n<li>Hardware Write Protection (WP#) and Hold (HOLD#) pins<\/li>\n<li>JEDEC manufacturer ID and device ID for automatic detection<\/li>\n<li>Supports Serial Flash Discoverable Parameters (SFDP) mode<\/li>\n<li>RoHS compliant and halogen-free<\/li>\n<\/ul>\n<h2>Aplicaciones<\/h2>\n<ul>\n<li>Automotive infotainment and ADAS firmware storage<\/li>\n<li>Industrial control system code and data storage<\/li>\n<li>Consumer electronics boot flash and parameter storage<\/li>\n<li>Networking equipment firmware and configuration storage<\/li>\n<li>IoT device program memory and OTA update partition<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"<p>Product Overview The MX25L3233FM2I-08G is a 32Mb (4MB) Serial NOR Flash memory from Macronix International, part of the MXSMIO family. It supports Single, Dual, and Quad I\/O SPI interfaces with clock frequencies up to 133MHz. The -08G speed grade offers 8ns access time in an 8-SOP (200mil) package rated for industrial temperature range (-40 to [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13],"tags":[931],"chip_brand":[187],"class_list":["post-9656","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","tag-mx25l3233fm2i-08g","chip_brand-mxic"],"acf":{"brief_explanation":"32Mb SPI\/Dual\/Quad NOR Flash, 133MHz, 8ns, 8-SOP, industrial temp, AEC-Q100","date_code":"","package_case":"8-SOP (200mil) (5.23 x 5.28 x 1.80 mm)","in_stock":5439,"datasheet":"https:\/\/www.macronix.com\/Lists\/Datasheet\/Attachments\/9123\/MX25L3233F,%203V,%2032Mb,%20v1.2.pdf","price":"$0.87 @ 5ku","product_introduction":"The Macronix MX25L3233FM2I-08G is a 32Mb Serial NOR Flash memory device from the MXSMIO (Serial Multi I\/O) product family. It provides flexible interface options including standard SPI, Dual Output SPI, Dual I\/O SPI, Quad Output SPI, and Quad I\/O SPI, enabling system designers to scale read performance from single data rate up to 4x throughput. With a maximum clock frequency of 133MHz in Quad I\/O mode, the device achieves effective read bandwidth exceeding 50MB\/s, suitable for execute-in-place (XIP) applications. The device is organized as 4,194,304 x 8 bits internally, with sector architecture of 1024 x 4KB sectors, 128 x 32KB blocks, and 64 x 64KB blocks. The 256-byte page programming buffer supports fast page program operations with 1.2ms maximum program time. Program Suspend\/Resume allows interruption of a page program to perform read operations in other sectors, critical for real-time systems. The 4K-bit secured OTP area provides a unique identifier and customer-lockable storage for security keys. AEC-Q100 qualification ensures reliability in automotive environments.","working_principle":"The MX25L3233F uses a standard SPI command protocol where the host initiates operations by driving CS# low and clocking in a command byte followed by address and data bytes through the SI pin. In Quad I\/O mode, pins SI, SO, WP#, and HOLD# all become bidirectional data lines (SIO0-SIO3), quadrupling data throughput. Read operations access the 75nm NOR Flash cell array through a sense amplifier and output pipeline. Program operations use a page buffer that loads 256 bytes before the internal algorithm applies high-voltage programming pulses to the selected page. Erase operations apply Fowler-Nordheim tunneling to remove charge from floating gates across an entire sector (4KB), block (32KB\/64KB), or the full chip. The suspend\/resume mechanism saves internal state when a program or erase is paused, allowing read access to non-conflicting address ranges. The 5.8V internal charge pump generates the high voltage needed for program and erase from the 2.65-3.6V supply, eliminating the need for external high-voltage supplies.","pin_description":"<table><tr><th>Pin<\/th><th>Name<\/th><th>Type<\/th><th>Function<\/th><\/tr><tr><td>1<\/td><td>CS#<\/td><td>Input<\/td><td>Chip Select (active low)<\/td><\/tr><tr><td>2<\/td><td>SO\/SIO1<\/td><td>I\/O<\/td><td>Serial Data Output \/ Quad I\/O Data 1<\/td><\/tr><tr><td>3<\/td><td>WP#\/SIO2<\/td><td>I\/O<\/td><td>Write Protect \/ Quad I\/O Data 2<\/td><\/tr><tr><td>4<\/td><td>VSS<\/td><td>Power<\/td><td>Ground<\/td><\/tr><tr><td>5<\/td><td>SI\/SIO0<\/td><td>I\/O<\/td><td>Serial Data Input \/ Quad I\/O Data 0<\/td><\/tr><tr><td>6<\/td><td>SCLK<\/td><td>Input<\/td><td>Serial Clock<\/td><\/tr><tr><td>7<\/td><td>HOLD#\/SIO3<\/td><td>I\/O<\/td><td>Hold (pause serial comm) \/ Quad I\/O Data 3<\/td><\/tr><tr><td>8<\/td><td>VCC<\/td><td>Power<\/td><td>Power Supply (2.65V-3.6V)<\/td><\/tr><\/table>","application_scenarios":"<ul><li>Automotive ECU and ADAS firmware storage with AEC-Q100 reliability<\/li><li>Industrial PLC and motor drive code storage with suspend\/resume for real-time reads<\/li><li>Consumer set-top box and smart TV boot flash using Quad I\/O XIP<\/li><li>IoT gateway OTA update partition with secured OTP for device authentication<\/li><li>Networking switch and router firmware with fast random access<\/li><\/ul>","alternative_models":"<table><tr><th>Manufacturer<\/th><th>Part Number<\/th><th>Package<\/th><th>Notes<\/th><\/tr><tr><td>Macronix<\/td><td>MX25L3233FM2I-08Q<\/td><td>8-SOP<\/td><td>Qualified version, same series<\/td><\/tr><tr><td>Winbond<\/td><td>W25Q32JVSSIQ<\/td><td>8-SOIC<\/td><td>32Mb Quad SPI, pin-compatible<\/td><\/tr><tr><td>GigaDevice<\/td><td>GD25Q32CSIG<\/td><td>8-SOIC<\/td><td>32Mb QSPI Flash, compatible<\/td><\/tr><tr><td>ISSI<\/td><td>IS25LP032D-JNLE<\/td><td>8-SOIC<\/td><td>32Mb QSPI, 133MHz<\/td><\/tr><tr><td>Cypress<\/td><td>S25FL032P0XMFI04<\/td><td>8-SOIC<\/td><td>32Mb SPI NOR<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/9656","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/comments?post=9656"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/9656\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media?parent=9656"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/categories?post=9656"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/tags?post=9656"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/chip_brand?post=9656"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}